Reka bentuk Saltatur Fungsi Utama: Meja oleh Masoud Akbarzadeh ialah pemenang yang sangat dihormati bagi 2020 A' Design Award Perak yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Perabot.
PerakPerabot· 2020
Saltatur Fungsi Utama: Meja
oleh Masoud Akbarzadeh
Klien: Polyhedral Structure Laboratory
Pemenang A' Design Award Perak dalam Kategori Perabot
Pemenang Anugerah Yang Disahkan
Sahkan Status Anugerah untuk #99680Reka Bentuk
Mengenai Saltatur Fungsi Utama: Meja
Saltatur ialah sebuah meja rentang panjang yang direka sebagai struktur komposit pasang siap. Meja ini menggabungkan badan konkrit yang hanya menanggung mampatan, rod keluli pasca-tegangan dan permukaan kaca ultra-nipis. Permukaan kaca dibentuk sebagai gerbang tiga engsel funikular yang merentangi 3.75 meter. Bentuk struktur ini dibangunkan menggunakan statik grafik tiga dimensi, jadi badan konkrit ditahan dalam keadaan mampatan oleh tali tegangan di bahagian atas dan bawah. Sistem ruang diskret ini mengurangkan isi padu konkrit dan jejak karbon sambil mengekalkan jisim yang diperlukan untuk prestasi struktur.
Pengiktirafan
Mengenai A' Design Award Perak
Saltatur Fungsi Utama: Meja ialah pemenang A' Design Award Perak, pengiktirafan yang sangat berprestij yang dianugerahkan kepada reka bentuk bertaraf tinggi, indah dan mengagumkan. Pemenang Perak ialah karya yang amat cemerlang dan sangat kreatif yang menggambarkan kepakaran, bakat dan ketajaman fikiran yang luar biasa pereka bentuknya. Saltatur Fungsi Utama: Meja diharapkan menjadi karya yang menakjubkan, contoh teladan, sangat profesional dan sangat inovatif. Reka bentuk pemenang A' Design Award Perak ini ialah ciptaan yang sangat ketara dan dikagumi yang memberi manfaat kepada dan memajukan batas seni, sains, reka bentuk dan teknologi. Saltatur Fungsi Utama: Meja ialah ciptaan yang sangat dicemburui yang membangkitkan keinginan, membawa perasaan positif dan mencetuskan rasa hairan serta kagum.
Di Sebalik Reka Bentuk
Kit Akhbar
Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.
- Ciri-Ciri Unik
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- Dimensi & Pembungkusan
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- Tag
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- Teknologi Pengeluaran
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- Cabaran Reka Bentuk
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- Penyelidikan
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- Inspirasi
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- Tempoh Projek
- 2 years, Weitzman School of Design, University of Pennsylvania
- Aliran Operasi
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- Paten
- N/A
- Ahli Pasukan
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- Kredit Imej
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
Ditaja
Terokai Melangkaui Designers.org
Temui produk, perkhidmatan dan peluang daripada rakan pengiklanan kami.
Lagi untuk Diterokai
Reka Bentuk Berkaitan
Terokai lebih banyak reka bentuk pemenang anugerah daripada kategori yang sama, dipilih berdasarkan merit.
