Solarbreaker Xatter Fotovoltajku tal-Faċċata minn Jaroslaw Markowicz

Id-disinn Solarbreaker Xatter Fotovoltajku tal-Faċċata minn Jaroslaw Markowicz huwa rebbieħ stmat ħafna tal-prestiġjuż 2020 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn ta' Materjali tal-Bini u Komponenti tal-Kostruzzjoni.

FiddaKomponenti tal-Bini· 2020

Solarbreaker Xatter Fotovoltajku tal-Faċċata

minn Jaroslaw Markowicz

Klijent: Phoenix Enterprise

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Komponenti tal-Bini

34,482

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #102697

Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Solarbreaker Xatter Fotovoltajku tal-Faċċata

Solarbreaker huwa xatter fotovoltajku tal-faċċata li jbiddel il-wiċċ tal-bini f'elementi li jipproduċu l-enerġija. Is-sistema hija bbażata fuq profili tal-aluminju estruż li fuqhom jitwaħħlu l-pannelli solari. Kull pannell huwa mmejjel b'ħames u erbgħin grad għal aktar effiċjenza, u modulu wieħed ta' metru kwadru wieħed jista' jħaddem sittax-il bozza LED. L-assemblaġġ jeħtieġ kważi l-ebda għodda, għaliex il-profili jitqiegħdu fuq il-muntatura u jitsakkru bil-piż tagħhom stess. Il-kejbils huma moħbija ġewwa l-profili. Minbarra l-faċċati, l-istess komponenti jistgħu jiffurmaw ċnut, ostakoli u tined.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

Solarbreaker Xatter Fotovoltajku tal-Faċċata huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li Solarbreaker Xatter Fotovoltajku tal-Faċċata ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Solarbreaker Xatter Fotovoltajku tal-Faċċata huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: Our solutions make photovoltaics an integral part of the building. Solarbreaker products make possible to use the entire building facade for energy production without disturbing its aesthetics. The system has been developed to give the greatest configuration options in the simplest possible form. The main application of Solarbreaker are building facades, however, using the flexible capabilities of the system we can build barriers, fences, window blinds or free-standing blinds from it.
Dimensjonijiet u Ippakkjar: Basic module dimensions 1000mm x 120 mm x 1000mm
Tikketti: Solar panels, photovoltaic, facade shutter, architecture, fence
Teknoloġija tal-Produzzjoni: The solarbreaker design is based on extruded profiles. Solar panels are mounted on the main profile. This method of assembly allows to easily separate materials so that the product can be recycled. The solution has been designed to be easy to install. Extruded profiles fold like lego blocks and allow for wide arrangement possibilities.
Sfida tad-Disinn: The biggest challenge of the project was to create a product that would retain its lightness despite the internal electronics and photovoltaic panel
Riċerka: The main research was to develop a product which can be adapted to almost any building. This required extensive analysis of the various buildings and their constructions. These studies have resulted in a design that is very easy to assemble. The first tests were made on 3D printed models. The wing loads were tested many times, which allowed the development of aluminium profiles with the required parameters.
Ispirazzjoni: The main inspiration for the product was the sun protection solutions existing on the market. Large glazed facades, unfortunately, make the rooms get very hot, the sun from the south can be a problem, however, we wanted to turn this disadvantage into an advantage. Solarbreaker allows to use almost the entire building for electricity production and at the same time protect it from the sun.
Tul tal-Proġett: the project was developed in Warsaw. Conceptual work lasted from november 2018. After many prototypes and tests, the project was finally implemented in January 2020.
Fluss tal-Operazzjoni: Connecting profiles and building structures requires almost no tools. The structure is built directly on site from components. Finished profiles with photovoltaic panel just need to be put on the mounting and pressed - under the pressure of weight the element will lock. Solarbreaker is equipped with the elements necessary to connect it to the home power grid. Cable connections are hide inside the profiles, therefore the solution is durable and resistant to weather conditions. The 1m2 module will produce enough energy to power sixteen LED bulbs (80wat in total). Each panel is tilted at an angle of 45 degrees, which ensures the highest efficiency.
Membri tat-Tim: Jarosław Markowicz, Daniel Ziomek