Junone Lampa tal-Mejda minn Alan Aronica

Id-disinn Junone Lampa tal-Mejda minn Alan Aronica huwa rebbieħ stmat ħafna tal-prestiġjuż 2021 Premju A' Design Award tal-Ħadid fil-Kategorija tal-Kompetizzjoni ta' Disinn tal-Arti Fini u Installazzjonijiet Artistiċi.

ĦadidArti Fini· 2021

Junone Lampa tal-Mejda

minn Alan Aronica

Klijent: Alan Aronica

Rebbieħ tal-Premju A' Design Award tal-Ħadid fil-Kategorija ta' Arti Fini

11,437

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #123885

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Junone Lampa tal-Mejda

Junone hija lampa ddisinjata li taħdem sew bħala dawl funzjonali kif ukoll bħala oġġett skulturali. Il-forma tgħaqqad forom organiċi rondi ma' tensjonijiet inspirati mill-industrija aeronawtika, biex toħloq preżenza arkitettonika u sens ta' direzzjoni. Junone hija magħmula biss minn nylon stampat bit-3D infuż bil-ħġieġ u azzar stampat bit-3D infuż bil-bronż. Qoxra vojta tnaqqas l-ammont ta' materjal użat mingħajr ma ddgħajjef l-istruttura. Il-lampa żżomm LED ta' 5 watt li jista' jinbidel u jiġi dimmjat, u titħaddem b'swiċċ sempliċi. Junone hija serje limitata ta' għaxar biċċiet innumerati.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Ħadid

Junone Lampa tal-Mejda huwa rebbieħ tal-Premju A' Design Award tal-Ħadid, rikonoxximent prestiġjuż mogħti lil disinji tajbin li jissodisfaw ir-rekwiżiti professjonali u industrijali mistennija minn ħolqien imfassal tajjeb. Ir-rebbieħa tal-Ħadid juru l-ħila kbira, l-ispeċjalizzazzjoni għolja, il-fehim espert u l-kapaċità kreattiva tal-ħallieqa tagħhom. Huwa mistenni li Junone Lampa tal-Mejda ikun ħolqien imqabbar ħafna, mammirat u maħbub li huwa prattiku u innovattiv. Dan id-disinn rebbieħ tal-Ħadid jintegra l-aħjar prattiki tal-industrija u għandu karatteristiċi tekniċi kompetenti marbuta mal-għarfien u t-talent. Junone Lampa tal-Mejda huwa rispettat għall-eżattezza tiegħu u mfassal biex itejjeb il-kwalità tal-ħajja u jgħin jagħmel id-dinja post aħjar.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: Junone is an exploration of the contrast arising from the juxtaposition of voluptuous organic shapes with sculptural tensions inspired by the aeronautical industry. Conceived to be architectural and yet suggesting a dynamic sense of directionality, Junone is made exclusively with 3D printed nylon infused with glass & 3D printed steel infused with bronze. Junone is part of a special series limited to only 10 pieces, each of which has a numbered label.
Dimensjonijiet u Ippakkjar: W:200mm x D:220mm x H:210mm;
Lighting: 5 Watt LED;
4,5m power cord (CEI 23-50 S11);
Tikketti: #3dprinted, #3dprinting, #designerlighting, #functionalart, #design
Teknoloġija tal-Produzzjoni: Multi Jet Fusion 3D Printing using PA12 Nylon 40% Infused with Glass Beads; Binder Jetting 3D Printing using Stainless Steel 40% Infused with Bronze Matrix.
Sfida tad-Disinn: I believe in taking only the resources that are really needed, that is why I work exclusively with additive manufacturing. One of the challenges in the 3D modeling phase was to create a 3D printable empty shell, to use the least possible amount of material without compromising neither the structure nor the aesthetic. Another challenge was to take full advantage of the reflective properties of metal, designing the interaction of light with the object from every angle. This was achieved by forecasting the light pathways through photorealistic renders.
Riċerka: Having had previous experiences both with 3D printed nylon/glass & 3D printed steel/bronze, I had a clear idea of how the materials would behave. I started by recreating an accurate digital model of the lightbulb and power cord, then I digitally sculpted the lamp's body around them. Once the design was locked, I recreated a 3D polygonal model accounting for the different physical properties of the materials as well as the different tolerances of the manufacturing techniques. After the 3D printing process, I hand-assembled and tested the lamp extensively.
Ispirazzjoni: Just like the shift from tempera to oil painting during Renaissance empowered a new generation of painters to express their creativity in unprecedented ways, the shift from subtractive to additive manufacturing enables us today to explore shapes that could simply not be fabricated before. With Junone I aim to challenge the dogma of how a lamp should look like and educate the public on the novel possibilities that 3D printing can offer to create a new generation of luxury goods.
Tul tal-Proġett: The project started in January 2021 in Milan and finished in March 2021 in Milan.
Fluss tal-Operazzjoni: This is to all effects a functional lamp, operated through a traditional ON/OFF switch and powered through a power cord from a wall plug.
The 4.5m power cord allows to reach even far away plugs. The LED lightbulb creates a warm and welcoming light without heating, and it is both dimmable and replaceable.