Id-disinn 5x5 Siġġu minn Barbara Princic huwa rebbieħ stmat ħafna tal-prestiġjuż 2014 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn tal-Għamara.

FiddaGħamara· 2014

5x5 Siġġu

minn Barbara Princic

Klijent: Sijaj Hrastnik

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Għamara

35,703

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #31513

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar 5x5 Siġġu

Is-siġġu 5x5 huwa proġett ta 'disinn tipiku fejn il-limitazzjoni hija rikonoxxuta bħala sfida. Is-siġġu tas-siġġu u d-dahar huma magħmula minn xilith li huwa diffiċli ħafna biex jiġi ffurmat. Xilith hija l-materja prima li tista 'tinstab 300 metru taħt il-wiċċ ta' l-art u hija magħquda ma 'faħam. Bħalissa l-maġġoranza tal-materja prima tintrema. Mil-lat ambjentali dan il-materjal jiġġenera skart fuq wiċċ id-dinja. Għalhekk l-idea dwar id-disinn tal-presidenza dehret li kienet provokattiva ħafna u ta 'sfida.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

5x5 Siġġu huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li 5x5 Siġġu ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. 5x5 Siġġu huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: The 5x5 chair is a typical design project where the limitation is recognized as a challenge. The chair's seat and the back are made of xilith which is very difficult to be shaped. Xilith is the raw material that can be found 300 meters under the ground surface and is comined with a coal. But it is nither the coal nor the wood. Currently the majority of the raw material is thrown away. From environmental point of view this material generates waste on the earth surface. Therefore the idea about chair design seemed to be very provocative and challenging. The scientific methods of the material's final surface treatment have been explored so if applied properly the final look can be close to that of ebony.
Each chair is unique as neither two tiles look the same. Therefore the chair can have more brown or more black look depending on the tiles collected together.
Dimensjonijiet u Ippakkjar: Width 470 mm x Depth 540 mm x Hight 840 mm
Tikketti: xilith, tiles, metal, elegant, thin, material innovation, experiment
Teknoloġija tal-Produzzjoni: Chair's structure:
- metal tub legs, surface nickel treated
- seat and back support made of laser cutted metal sheet, surface nickel treated
- Xilith tiles, cut, surface treated with linseed oil;
tiles glued on metal sheet surface
Sfida tad-Disinn: Material's unique visual properties, physical characteristics and manufacturing limitations were challenging.
The design challenge was simply how to make a chair from little tiles? how to connect them? How to make the underneath seat's metal sheet stiff but yet almost invisible, thin.
Riċerka: It was all about experimental work with this unique material. The scientific methods of surface treatment were examined years before within Biotechnological Faculty, University of Ljubljana. If the surface is treated properly, the outcome look is similar to ebony.
Ispirazzjoni: As explained in the project explanation; material's unique visual properties, physical characteristics and manufacturing limitations were challenging.
Xilith is the raw material that is very hard and fragile. Therefore the tile's dimension 5x5 cm is the maximum still acceptable dimension for manufacturing since the material itself is very difficult to be manufactured and shaped.
Tul tal-Proġett: The project started in May 2008 and finished in October 2008 in Slovenia. It was exhibited at several exhibitions like
- Month of Design, October 2008, Ljubljana, Slovenia
- Reader-friendly Design, January 2010, Ljubljana, Slovenia
- The Design Assembly, May 2010, Graz, Austria
- IDEA Award Winners and Finalists exhibition, August 2010, Henry Ford Museum, Michigan USA
- Charm of wood, spring 2011, Ljubljana, Slovenia
- Ambient, furniture fair, October 2013, Ljubljana, Slovenia
Fluss tal-Operazzjoni: It enables very comfortable and ergonomic sitting.
Membri tat-Tim: Barbara Princic, designer
Mr. Miran Drac, technologist
Krediti tal-Immaġni: Images No.1-5, photographer Miha Benedicic, 5x5 chair, 2009.