Dash Wirja tal-Identifikazzjoni tal-Wiċċ minn Clear

Id-disinn Dash Wirja tal-Identifikazzjoni tal-Wiċċ minn Clear huwa rebbieħ stmat ħafna tal-prestiġjuż 2020 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn ta' Prodotti tas-Sigurtà u Sorveljanza.

FiddaProdotti tas-Sigurtà· 2020

Dash Wirja tal-Identifikazzjoni tal-Wiċċ

minn Clear

Klijent: Clear

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Prodotti tas-Sigurtà

32,011

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #90944

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Dash Wirja tal-Identifikazzjoni tal-Wiċċ

Dash huwa wirja tal-identifikazzjoni tal-wiċċ iddisinjat għall-iskrinjar tas-sigurtà fl-ajruporti, l-istadji, l-isptarijiet u l-postijiet tal-avvenimenti. Dash jgħaqqad kamera, proċessur, softwer, skrin tal-mess u pannelli LED ma' database ta' profili bijometriċi. Il-pannelli LED jaġġustaw ruħhom għall-kundizzjonijiet tad-dawl li jinbidlu, biex ritratti ċari jkunu jistgħu jitqabblu malajr u b'mod preċiż mal-profili bijometriċi maħżuna. L-inkwadratura tar-ras tkejjel 350 millimetru wisa', 550 millimetru għoli u 150 millimetru fond, u tinżamm minn stand tal-azzar miksi bit-trab u ttejpjat. L-iskrin il-kbir juri wkoll informazzjoni u reklamar.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

Dash Wirja tal-Identifikazzjoni tal-Wiċċ huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li Dash Wirja tal-Identifikazzjoni tal-Wiċċ ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Dash Wirja tal-Identifikazzjoni tal-Wiċċ huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: Dash combines a camera, processor, software, touchscreen, and led panels with a biometric profile database. Based on years of previous experience, it’s our best performing biometric camera yet. The led panel adjusts to changing light conditions, providing high-quality photos for matching, while meeting stringent US airport security. The large screen doubles as an info and advertising point. Dash allows comfortable biometric identification in a quick, accurate manner.
Dimensjonijiet u Ippakkjar: The Intel 10th generation pc, bespoke led lighting circuit board, and 15.6 in touchscreen is housed within a custom enclosure, designed for maximum security for the biometric profiles. The Dash head enclosure is 350mm wide,550mm high, and 150mm deep.The pole kiosk mount with Dash has an overall size of 1850mm x 500mm x 500mm.
Tikketti: Biometrics, Identity, Travel, Ticketing, Lines, Face Recognition
Teknoloġija tal-Produzzjoni: Dash is made from hundreds of components made in many ways. Camera, speakers, pc, screen and cables are purchased. There is a custom-led circuit board, optimized for diffuse illumination, and a laser-cut, formed sheet metal. Plastic parts were made with sls prints, as well as rtv urethane casting molds. The stand is made from powder coated steel tube and plates, cut and formed. Tamper resistant screws and fixings are purchased from factories. Overall the design is made to be onbrand while secure from unauthorized access.
Sfida tad-Disinn: The most significant design challenge visually was adjusting to the long and thin camera/lens combination, chosen for high performance. The length made the depth of the Dash much thicker than more commonly seen flat screens. To minimize the visual size, deep rear chamfers and a sculpted central area on the back conceal the overall thickness. Additionally, a thin tapered support stand accentuates the delicate shape, helping to minimize the size. Inspiration was taken from Saarinen's tulip table and JFK airport terminal 5 architecture. The final product is the result of many design iterations and working prototypes.
Riċerka: For aesthetic reasons and biometric identity performance, the team experimented with different design configurations, followed by review, and re-design. The lighting led pcb went through many iterations to best illuminate a subject in a natural way. These models were tested in a lab and in live public areas, such as the Fort Lauderdale Airport, to research performance in a space with changing lighting conditions.
Ispirazzjoni: Dash is the latest of CLEAR biometric innovations. Designed for facial identification only, this version fits CLEAR’s brand with rounded shapes and white color, while evolving the brand with a smaller, sleeker form. The new shapes bring in retro-futuristic airport styling cues, reminiscent of Saarinen.
Tul tal-Proġett: The project started in New York, Laguna Beach, and Bristol (UK) in January 2019. The first prototypes were tested in Ft Lauderdale in April 2019, then again in May in Houston. The first production was created for Citi Field baseball stadium in New York in August 2019. Production has continued since then for events, sporting stadiums, hospitals, and airports across the US.
Fluss tal-Operazzjoni: The subject walks up to Dash and reads the onscreen instructions. Lights adjust for local conditions. Photos are taken and sent to software to check against a biometric profile database. With a match, subject is notified via onscreen cues, then they can make selections on touchscreen. DASH finishes by displaying info and instructions, like seat number. If there is no match, info is displayed on front and rear screens and attendant is notified.
Membri tat-Tim: Designer: Gregory Sparks, Travis Baldwin, Arvin Abadilla
Engineering: Keith Grethen, Jono Taylor
Project Manager: Bill Willis
Krediti tal-Immaġni: Image #1: Designer Travis Baldwin, DASH front renderings, 2019.
Image #2: Designer Travis Baldwin, DASH rear renderings, 2019.
Image #3: Photographer Gregory Sparks, DASH at Citi Field 1, 2019.
Image #4: Photographer Gregory Sparks, DASH in Medical Scenario, 2019.
Image #5: Photographer Gregory Sparks, DASH at Citi Field 2, 2019.