Id-disinn Saltatur Mejda minn Masoud Akbarzadeh huwa rebbieħ stmat ħafna tal-prestiġjuż 2020 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn tal-Għamara.

FiddaGħamara· 2020

Saltatur Mejda

minn Masoud Akbarzadeh

Klijent: Polyhedral Structure Laboratory

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Għamara

34,089

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #99680

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Saltatur Mejda

Saltatur hija mejda b'medda twila ddisinjata bħala struttura komposta prefabbrikata. Il-mejda tgħaqqad flimkien ġisem tal-konkrit li jaħdem bil-kumpressjoni biss, vireg tal-azzar bil-post-tensjoni u wiċċ tal-ħġieġ ultra-rqiq. Il-wiċċ tal-ħġieġ huwa ffurmat bħala ark funikulari bi tliet ċappetti li jkopri medda ta' 3.75 metri. Il-forma strutturali ġiet żviluppata bl-istatika grafika tridimensjonali, għalhekk il-ġisem tal-konkrit jinżamm fil-kumpressjoni permezz ta' rbit tat-tensjoni fin-naħa ta' fuq u ta' isfel. Is-sistema spazjali diskreta tnaqqas il-volum tal-konkrit u l-marka tal-karbonju filwaqt li tippreserva l-massa meħtieġa għall-prestazzjoni strutturali.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

Saltatur Mejda huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li Saltatur Mejda ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. Saltatur Mejda huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
Dimensjonijiet u Ippakkjar: 195 cm (W) x 308 cm (L) x 90 cm (H)
Tikketti: composite, ultra thin spatial concrete, design for reassembly, funicular structures
Teknoloġija tal-Produzzjoni: There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
Sfida tad-Disinn: Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
Riċerka: The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
Ispirazzjoni: The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
Tul tal-Proġett: 2 years, Weitzman School of Design, University of Pennsylvania
Fluss tal-Operazzjoni: The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
Privattivi: N/A
Membri tat-Tim: Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
Krediti tal-Immaġni: Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory