Arch Icpalli, Icpalli Amo Itzintepotz ītēchcopa Edvard Glazebrook

Tlanāhuatīlli Arch Icpalli, Icpalli Amo Itzintepotz ītēchcopa Edvard Glazebrook cē cencā mahuizzō tēmacēhualōni īpan huēyi 2021 Mahuizolli A' Design Award Bronse īpan Caltlapechtli Tlachihchihualiztli Nēhuilīztli Tlamantli.

BronseCaltlapechtli· 2021

Arch Icpalli, Icpalli Amo Itzintepotz

īpal Edvard Glazebrook

Mahuizolli A' Design Award Bronse Tēmacēhualōni īpan Caltlapechtli Tlamantli

11,198

Tlaneltīlīlli Tēmacēhualōni

Xictlaneltilia Tēmacēhualli ītēchcopa #106853

Xiquitta A' Design Award ītechcopa Āmatl Tēmachiyōtīliztli Tlamachiōtl

Tlapalli

Tlanēxtilistli

Ītechcopa Arch Icpalli, Icpalli Amo Itzintepotz

Arch icpalli ihuan icpalli amo itzintepotz, chīhualli ika ocotl cuahuitl tlaxeloli ihuan tlacualōlli tliltic. In tlanahuatilli moquetza itech in yōllōca huan mocepanoa mochīhuani, tlein maca in tlaquentli ce mahuizauhqui ihuan tlamatqui neztli. Māhcuīlli ehcatl arch tlein sanoyeh mochīuhqueh mochihchīhuah in icxitl ihuan itepotz icpalli, ihuan in icpalli amo itzintepotz mochīhua ika ēyi tlahco arch, tlein mocepanoa in tlanepantla. Nochi in tlaxelōltin motequih itech se cuahuitl tlaxeloli ika CNC tlatequini, zatepan motzaqua ihuan monetechilia ika cuahuitl tlaxinilli. In coloānaliztli quichicāhua in tlaquentli itech in tlein occencah amo chicāhuac.

Tēixīmachōtiliztli

Ītechcopa Mahuizolli A' Design Award Bronse

Arch Icpalli, Icpalli Amo Itzintepotz ca in quicuic in Mahuizolli A' Design Award Bronse, hueyi tlamahuizoliztli tlen momaca in cualli tlachihualli in motenehua ipampa yancuic tlamantli, tlamatiliztli ihuan ixtlamatiliztli. In quicuicah Bronse ca tlachihualli in quipia toltecayotl ihuan quinextia in cenca miac nemiliztli ihuan tlamatiliztli intlachihuanime. Ca quinequi in Arch Icpalli, Icpalli Amo Itzintepotz ca tlazohtli tlamantli, mahuiztic ihuan cualli. Ni dizayno in quicuic Bronse quipia cualli toltecayotl ihuan quitta in tlen tepiton. Arch Icpalli, Icpalli Amo Itzintepotz quipaquiltia in tlacah ihuan quitlamahuiztiltia in intlanequiliz.

Tlanēxtilistli Ītēixpan

Āmatl Tlanextīliztli

Tlapōhualli, tēquitqueh īwan tēchmachilīztli ōquinmaca in tlanēxtīlīlli.

Cē Zan Ītēchcopa: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Huēyiliztli īhuān Tlacualtepēhualli: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Tōcāitl: Wood, Chair, Stool, Pine wood, Arches, Curve
Tlachīhualiztli Māchiyōtl: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Tlanāhuatīlli Nētēcahuilīztli: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Tlatēmōliztli: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Tēyōllālīliztli: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Tēquitl Cāhuitl: The project started in march 2020 - and finished in late May 2020.
Tēquitl Ōhuitl: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patentēmeh: Copyrights belong to Edvard Glazebrook, 2020
Calpolli Tlācah: Edvard Glazebrook