Vista EY2T Tlachializtli Neixnamiquiliztli Tepoztlachializcopina Ololochtli ītēchcopa Chris Dopp & Travis Baldwin

Tlanāhuatīlli Vista EY2T Tlachializtli Neixnamiquiliztli Tepoztlachializcopina Ololochtli ītēchcopa Chris Dopp & Travis Baldwin cē cencā mahuizzō tēmacēhualōni īpan huēyi 2015 Mahuizolli A' Design Award Iztacteocuitlatl īpan Tlapializtli, Tlapializtlanahuatilli ihuan Tlapializtlachializtli Tlachihualli Tlachihchihualiztli Nēhuilīztli Tlamantli.

IztacteocuitlatlTlapializtli Tlachihualli· 2015

Vista EY2T Tlachializtli Neixnamiquiliztli Tepoztlachializcopina Ololochtli

īpal Chris Dopp & Travis Baldwin

Tlanāhuatīlli: Vista Imaging and Crea Inc Design LTD

Mahuizolli A' Design Award Iztacteocuitlatl Tēmacēhualōni īpan Tlapializtli Tlachihualli Tlamantli

25,961

Tlaneltīlīlli Tēmacēhualōni

Xictlaneltilia Tēmacēhualli ītēchcopa #40052

Xiquitta Tlahcuilōlcalli Xiquitta A' Design Award ītechcopa Āmatl Tēmachiyōtīliztli Tlamachiōtl

Tlapalli

Tlanēxtilistli

Ītechcopa Vista EY2T Tlachializtli Neixnamiquiliztli Tepoztlachializcopina Ololochtli

Vista EY2T in tlacatl ololochtli tepoztlachializcopina in molinia inic quiximatiz ixtelolotl ihuan ixco. In tlamamalli quitemoa nochi in ixco pan itlachializyan, zatepan nemani quinequetza in tlachializcopina inic quiiximatia ixtelolomeh. Miec tlanextiliztli tlein amo neci (infrared LED) ihuan ce tlacahuiliztli tlein moyolcuepa ixnezcayotl (autofocus) motequitiltia inic huel cuiliz ixtli ipan tlanahuatilli 3 ahnozo 6 ihpixtli huehcatlan, yeca amo monequi ma yolcatlacatl quinequetza ica ima. Chicnahui ixmachiotl pan ixco cah ce tliltic ixco, ihuan in ololochtli tlein iuhqui pahtli ica cuallalca inacaz caxtitiuh ce yolceuhqui ihuan amo temauhtiani neciz. In tepoztlachializcopina huel motequitiltia iselti ahnozo ica ce tepamitl icetlaliliztli.

Tēixīmachōtiliztli

Ītechcopa Mahuizolli A' Design Award Iztacteocuitlatl

Vista EY2T Tlachializtli Neixnamiquiliztli Tepoztlachializcopina Ololochtli ca in quicuic in Mahuizolli A' Design Award Iztacteocuitlatl, hueyi tlamahuizoliztli tlen momaca in huel yectli, tlanextic ihuan mahuiztic tlachihualli. In quicuicah Iztacteocuitlatl ca cenca cualli ihuan cenca yancuic tlachihualli in quinextia in tlamatiliztli, toltecayotl ihuan ixtlamatiliztli intlachihuanime. Ca quinequi in Vista EY2T Tlachializtli Neixnamiquiliztli Tepoztlachializcopina Ololochtli ca cenca cualli, cenca motequiuhtia ihuan yancuic. Ni dizayno in quicuic Iztacteocuitlatl quihuelitia in toltecayotl, tlamatiliztli, dizayno ihuan teknolohia. Vista EY2T Tlachializtli Neixnamiquiliztli Tepoztlachializcopina Ololochtli quiyolchicahua in tlacah, quipaquiltia ihuan quitlamahuiztiltia.

Tlanēxtilistli Ītēixpan

Āmatl Tlanextīliztli

Tlapōhualli, tēquitqueh īwan tēchmachilīztli ōquinmaca in tlanēxtīlīlli.

Cē Zan Ītēchcopa: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Huēyiliztli īhuān Tlacualtepēhualli: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Tōcāitl: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Tlachīhualiztli Māchiyōtl: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Tlanāhuatīlli Nētēcahuilīztli: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Tlatēmōliztli: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Tēyōllālīliztli: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Tēquitl Cāhuitl: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Tēquitl Ōhuitl: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Calpolli Tlācah: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Īxiptla Tlanēxtīlli: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015