Planck Cahuamēsah ītēchcopa Kristof De Bock

Tlanāhuatīlli Planck Cahuamēsah ītēchcopa Kristof De Bock cē cencā mahuizzō tēmacēhualōni īpan huēyi 2020 Mahuizolli A' Design Award Cozticteocuitlatl īpan Caltlapechtli Tlachihchihualiztli Nēhuilīztli Tlamantli.

CozticteocuitlatlCaltlapechtli· 2020

Planck Cahuamēsah

īpal Kristof De Bock

Tlanāhuatīlli: Dasein Products

Mahuizolli A' Design Award Cozticteocuitlatl Tēmacēhualōni īpan Caltlapechtli Tlamantli

62,500

Tlaneltīlīlli Tēmacēhualōni

Xictlaneltilia Tēmacēhualli ītēchcopa #93711

Xiquitta Tlahcuilōlcalli Xiquitta A' Design Award ītechcopa Āmatl Tēmachiyōtīliztli Tlamachiōtl

Tlapalli

Tlanēxtilistli

Ītechcopa Planck Cahuamēsah

In mēsah chīhualōc īca mīyaqueh cuauhtextetzohtzomah tēntzacuīlōqueh īhuān chicāhuacāyoh. Īxtilhuān mopācāqueh īhuān tlahtlālīlōqueh cē chicāhuac ahuayoh tlen ahmo pepechtic. Oncah ōme nepantlāhuah pampa ītīc yahualtic; huel cualli īpan motlāliah amoxtli ahnozo tilmahtli. Ītzintlan mēsah oncah pītziton malacameh tlahtlālīlōqueh. Ic in cāhuitl tlālli īhuān mēsah pītzin, zan nōihqueh āmah nēnequi. Īn quēnin cuauhtextetzohtzomah mochīhua quetzahtic quichīhua huel chicāhuac.

Tēixīmachōtiliztli

Ītechcopa Mahuizolli A' Design Award Cozticteocuitlatl

Planck Cahuamēsah ca in quicuic in Mahuizolli A' Design Award Cozticteocuitlatl, huel mahuiztic tlamahuizoliztli tlen momaca in achtopa, huel cualli ihuan mahuiztic tlachihualli. In quicuicah Cozticteocuitlatl ca cenca yancuic, tlachiyani ihuan tlanextic tlachihualli in quinextia in tlamatiliztli ihuan toltecayotl. Ca quinequi in Planck Cahuamēsah quitlalizque yancuic tlamantli ihuan quimacazque tlazohtli. Ni dizayno in quicuic Cozticteocuitlatl ca mahuiztic tlamantli in quihuelitia in toltecayotl, tlamatiliztli, dizayno ihuan teknolohia. Planck Cahuamēsah quiyolchicahua ihuan quipaquiltia in tlacah.

Tlanēxtilistli Ītēixpan

Āmatl Tlanextīliztli

Tlapōhualli, tēquitqueh īwan tēchmachilīztli ōquinmaca in tlanēxtīlīlli.

Cē Zan Ītēchcopa: Dasein products was looking to come up with an unique coffee table. Different in form and materials. They choose plywood but used it in an unconventional way by bonding it together on the flat sides. This gave the possibility to make a robust and elegant looking object at the same time. Seen from the sides one sets eyes on a block of wood, seen from the fronts, one looks at an elegant, 2-level object. Due to the strength of the material, the thickness of the levels can be reduced to a thin line.
Huēyiliztli īhuān Tlacualtepēhualli: Width 75 cm x Depth 46 cm x Height 30 cm
Tōcāitl: Objectdesign, coffeetable, furniture, living room
Tlachīhualiztli Māchiyōtl: The table is made of several pieces of polish pine plywood that are prepared with a CNC cutter. Once they are connected with glue and kept under high pressure for at least 12 hours, they require intense sandpapering and varnishing.

At the bottom, holes are drilled for the bullet wheels that need to be glued in.
Tlanāhuatīlli Nētēcahuilīztli: The biggest challenge for this project was to come up with a unique concept that has an esthetic added value but is still functional. Dasein Products has chosen to make a rather small coffee table that is very easy movable. It can be used to store plaids, books, etc. so it looks neat at the sam time.
Tlatēmōliztli: The object is designed with the golden ratio in mind. Seen both from top as from short sides, these proportions are respected for the wooden part.

The 2 horizontal layers where intended to be thin but strong. They are narrowed down to 17mm and still a full grown man can stand on the middle of the table.

A lot of time was spend on finding the bullet wheels. Metal wheels are strongest, but make a lot of noise on a stone floor. So the designer came up with small nylon wheels, but lots of them. In total 16 are placed under each table.
Tēyōllālīliztli: Above all, furniture should be functional. The challenge was to create a coffee table that was different then others, esthetic and functional. With these goals in mind, the designer explored different materials.
Tēquitl Cāhuitl: The basic idea came early summer of 2019. It took some time to get the details straight in the workshop in Ronse (Belgium) but in the beginning of September the coffee table was presented to the world.
Tēquitl Ōhuitl: The table is fairly small and movable. The idea is to eliminate the big center piece table, but place (more than one) in the living room that can be moved to where it is needed.
Calpolli Tlācah: Kristof De Bock
Īxiptla Tlanēxtīlli: Photograper Pieter Gregoire