Designet Saltatur Bord av Masoud Akbarzadeh er en høyt verdsatt vinner av den svært prestisjetunge 2020 A' Design Award i Sølv i konkurransekategorien Møbeldesign.
SølvMøbler· 2020
Saltatur Bord
Klient: Polyhedral Structure Laboratory
Vinner av A' Design Award i Sølv i kategorien Møbler
Verifisert prisvinner
Verifiser prisstatus for #99680Designet
Om Saltatur Bord
Saltatur er et bord med lang spennvidde, utformet som en prefabrikkert komposittkonstruksjon. Bordet kombinerer en betongkropp som kun tar opp trykkrefter, etterspente stålstenger og en ultratynn glassplate. Glassplaten er formet som en funikulær treleddet bue med en spennvidde på 3,75 meter. Den strukturelle formen ble utviklet med tredimensjonal grafisk statikk, slik at betongkroppen holdes i trykk av strekkstag øverst og nederst. Det diskrete romlige systemet reduserer betongvolumet og karbonavtrykket samtidig som det bevarer massen som kreves for strukturell ytelse.
Anerkjennelsen
Om A' Design Award i Sølv
Saltatur Bord er vinner av A' Design Award i Sølv, en usedvanlig prestisjefylt anerkjennelse som tildeles design i toppklassen som er nydelige og imponerende. Sølvvinnere er enormt briljante og usedvanlig kreative verk som viser designernes enestående ekspertise, talent og skarpsindighet. Saltatur Bord forventes å være et praktfullt utstillingsverk som er bemerkelsesverdig profesjonelt og dypt nyskapende. Dette designet, som har vunnet A' Design Award i Sølv, er en svært bemerkelsesverdig, beundret oppfinnelse som gagner og flytter grensene for kunst, vitenskap, design og teknologi. Saltatur Bord er et skaperverk mange misunner, som vekker ønsker, gir positive følelser og vekker undring og forundring.
Bak designet
Pressepakke
Krediteringer, teammedlemmer og tekniske detaljer levert av designeren.
- Unike egenskaper
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- Dimensjoner og emballasje
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- Stikkord
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- Produksjonsteknologi
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- Designutfordring
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- Forskning
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- Inspirasjon
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- Prosjektvarighet
- 2 years, Weitzman School of Design, University of Pennsylvania
- Driftsflyt
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- Patenter
- N/A
- Teammedlemmer
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- Bildekreditering
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
Sponset
Utforsk utover Designers.org
Oppdag produkter, tjenester og muligheter fra våre annonsepartnere.
Mer å utforske
Relaterte design
Utforsk flere prisvinnende design fra samme kategori, valgt etter fortjeneste.
