Lucrarea Airwood Kit Dronă de Uavi Technology este un câștigător de mare prestigiu al premiului 2020 A' Design Award de Fier în Categoria de Competiție Design de Jucării.

FierJucărie· 2020

Airwood Kit Dronă

de Uavi Technology

Client: UAVI Technology (Shen Zhen) Limited

Câștigător al premiului A' Design Award de Fier în Categoria Jucărie

17,987

Câștigător Verificat al Premiului

Verificați Statutul Premiului pentru #103852

Vizitați Site-ul Vizualizați la A' Design Award Comunicat de Presă Insigna Premiului

Culori

Designul

Despre Airwood Kit Dronă

Airwood este un kit de dronă de asamblat, conceput pentru copii și adulți. Drona cu patru axe utilizează un cadru realizat din placă de tei compozit, tăiată în piese fine de doi milimetri cu ajutorul unui cutter laser. Utilizatorii asamblează manual plăcile de lemn și componentele electronice pentru a construi atât drona, cât și telecomanda. Controlerele, motoarele și bateriile modulare permit crearea mai multor cadre și aspecte diferite dintr-un singur set. Drona susține planarea în interior, fotografia aeriană și programarea grafică. Lemnul certificat reduce utilizarea plasticului și a metalului.

Recunoașterea

Despre A' Design Award de Fier

Airwood Kit Dronă a câștigat A' Design Award de Fier, o recunoaștere prestigioasă acordată designurilor bune care îndeplinesc cerințele profesionale și industriale așteptate de la creații bine concepute. Câștigătorii Fierului demonstrează mare pricepere, înaltă specializare, înțelegere de specialitate și capacitate creativă din partea creatorilor lor. Se așteaptă ca Airwood Kit Dronă să fie o creație foarte apreciată, admirată și prețuită, practică și inovatoare. Acest design câștigător al A' Design Award de Fier integrează cele mai bune practici din industrie și are caracteristici tehnice competente îmbinate cu know-how și talent. Pentru acuratețea sa, Airwood Kit Dronă merită respect și este conceput pentru a aduce îmbunătățiri ale calității vieții care ajută la facerea lumii un loc mai bun.

În Spatele Designului

Dosar de Presă

Credite, membri ai echipei și detalii tehnice furnizate de designer.

Proprietăți Unice: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Dimensiuni și Ambalare: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Etichete: Drone, Wood, DIY, Modularity, Programmable
Tehnologie de Producție: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Provocare de Design: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Cercetare: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspirație: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Durata Proiectului: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Flux Operațional: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Brevete: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Credite Imagini: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.