Kejun Li, Zhang Jiahua and Nitesh Narappa Re ᱨᱮᱱᱟᱜ Mobius बाति ᱫᱚ ᱞᱟᱭᱴᱤᱝ ᱩᱛᱯᱟᱫ ᱟᱨ ᱯᱷᱤᱠᱥᱪᱟᱨ ᱰᱤᱡᱟᱭᱤᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2020 A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱥᱳᱱᱟᱞᱟᱭᱴᱤᱝ· 2020
Mobius बाति
Kejun Li, Zhang Jiahua and Nitesh Narappa Re ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Ooudesign
ᱞᱟᱭᱴᱤᱝ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#101965 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Mobius बाति ᱵᱟᱵᱚᱛ ᱛᱮ
मोबियस रिङ मोबियस बाति रेयाक् डिजाइन लागित् जोगाव् एमा-आ। मिद् बाति स्ट्रिप रे बार्या छाँव ओता (मतलब् बार्-फेटाक् ओता) होय दाड़ेयाक्-आ, आगु आर् उल्टा, जाहाँ पुरा साओते रेयाक् सेनेल् दोहो पुरावेद-आ। एयाक् खास आर् साध्राक् बानोत रे गोपोन गणित रेयाक् सुन्दोरिया आटकार एद-आ। एन्ते, ओड़ाक् जिवोन रे बाड़ती लय रेयाक् सुन्दोरिया आगुक्-आ होयोक्-आ।
ᱢᱟᱱᱟᱱ
A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Mobius बाति ᱫᱚ A' Design Award ᱥᱳᱱᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱵᱷᱟᱞᱟᱭ ᱛᱮ ᱵᱷᱟᱞᱟᱭ ᱟᱨ ᱥᱩᱱᱫᱚᱨ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Mobius बाति ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- The Mobius ring gives inspiration for this lamp design. One lamp strip may have two shadow surfaces (i.e. two-sided surface), the obverse and the reverse, which will satisfy all-round lighting demand. Its special and simple shape contains mysterious mathematical beauty. Therefore, more rhythmic beauty will be brought to home life.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- Material: Bamboo with heat-bending forming process/3D printed acrylic.
Dimensions:Length:340mm Width:76mm Height:350mm - ᱴᱮᱜ ᱠᱚ
- pendant, light, mobius, aesthetic
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- The pendant's shell is made of bamboo, The outer shell of the lamp is formed by using a bamboo material through a heat bending forming process, and the lampshade is made of acrylic material with a built-in LED strip.
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- The process of exploring this shape is very difficult because we don't want to make it look too superficial and like the Mobius band. Therefore we must find a balance in the shape.
- ᱜᱚᱵᱮᱥᱚᱱᱟ
- This shape is developed from the Mobius band. It is not easy to show the Mobius elements beautifully. This process took a lot of time to experiment. In the beginning, we drew sketch a lot of shapes to explore and then folding basic shapes with paper, we gradually perfected the shape through 3D models and 3D printing technology. And finally, we made the functional prototype.
- ᱯᱨᱮᱨᱚᱱᱟ
- The Mobius Ring gave the inspiration for this design. The methmetical
model of Mobius ring attracted my attention when I was reading a book, this inspired me to make a rough paper model and try to make an exploratory assumption, How beautiful and timeless would it look if I could make it into a lamp and hang it in my house. - ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The project began in May 2018 in China and finished in November 2019 in Milano, and will be exhibited in Salone Satellite in April 2020.
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- One lamp strip may have two shadow surfaces (i.e. two-sided surface), the obverse and the reverse, which will satisfy all-round lighting demand.
- ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ
- Jiahua Zhang
Nitesh Narappa Reddy - ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ
- LI KEJUN
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
