Cemil Yavuz ᱨᱮᱱᱟᱜ Mira ᱠᱩᱨᱥᱤ ᱫᱚ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱰᱤᱡᱟᱭᱤᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2021 A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱞᱚᱦᱟᱯᱷᱟᱨᱱᱤᱪᱟᱨ· 2021
Mira ᱠᱩᱨᱥᱤ
Cemil Yavuz ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Cemil Yavuz
ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#116467 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Mira ᱠᱩᱨᱥᱤ ᱵᱟᱵᱚᱛ ᱛᱮ
ᱢᱤᱨᱟ ᱢᱮᱱᱠᱷᱟᱱ ᱢᱤᱭᱟᱦᱮᱴ ᱠᱩᱨᱥᱤ ᱜᱮ ᱡᱟᱦᱟᱸ ᱡᱚᱢ ᱟᱨ ᱟᱭᱢᱟ ᱠᱟᱛᱮ ᱫᱷᱟᱶᱲᱟ ᱠᱟᱛᱮ ᱵᱮᱵᱷᱟᱨ ᱞᱟᱹᱜᱤᱫ ᱪᱮᱥᱚᱜ ᱠᱟᱱᱟ ᱾ ᱴᱷᱟᱹᱲᱤ ᱠᱚ ᱯᱮ ᱴᱷᱮᱱ ᱜᱚᱞᱟᱠᱟᱨ ᱥᱴᱮᱱᱞᱮᱥ ᱥᱴᱤᱞ ᱯᱨᱚᱯᱷᱟᱭᱤᱞ ᱠᱷᱚᱱ ᱛᱮᱭᱟᱨ ᱠᱟᱱᱟ ᱾ ᱵᱟᱨ ᱯᱨᱚᱯᱷᱟᱭᱤᱞ ᱠᱚ ᱢᱤᱫ ᱠᱚᱱᱟ ᱟᱨ ᱢᱤᱫ ᱫᱤᱥᱟ ᱨᱮ ᱵᱟᱸᱜᱟᱣ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱠᱷᱚᱱ ᱯᱤᱭᱟ ᱴᱷᱟᱹᱲᱤ ᱟᱲᱟ ᱴᱷᱟᱹᱨ ᱨᱮ ᱵᱟᱸᱜᱟᱣ ᱟᱠᱟᱱᱟ ᱾ ᱴᱷᱟᱹᱲᱤ ᱠᱚᱲᱟᱹ ᱟᱨ ᱛᱟᱦᱮᱸᱱ ᱡᱟᱭᱜᱟ ᱨᱮ ᱠᱟᱯᱟᱲ ᱮᱢ ᱠᱟᱛᱮ ᱛᱚᱯᱚᱞ ᱠᱟᱱᱟ ᱟᱨ ᱴᱷᱟᱹᱲᱤ ᱠᱟᱛᱮ ᱠᱟᱴᱲᱟ ᱟᱠᱟᱱ ᱯᱞᱟᱥᱴᱤᱠ ᱛᱩᱛᱩᱨ ᱠᱚ ᱮᱴᱟᱜ-ᱟᱠᱟᱱ ᱨᱮ ᱮᱴᱠᱟᱜ ᱮᱢᱚᱜ ᱠᱟᱛᱮ ᱠᱩᱨᱥᱤ ᱡᱷᱚᱛᱚ ᱚᱲᱟᱜ ᱠᱟᱱᱟ ᱾ ᱢᱤᱨᱟ ᱞᱟᱦᱟ ᱠᱟᱱᱟ ᱟᱨ ᱡᱩᱲᱤ ᱛᱚᱨᱮ ᱟᱨ ᱟᱲᱟ ᱠᱷᱚᱱ ᱦᱚ ᱛᱚᱯᱚᱞ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ ᱾ ᱠᱩᱨᱥᱤ ᱮᱴᱟᱜ ᱴᱮᱱᱚᱱ ᱟᱨ ᱡᱟᱦᱟᱸ ᱴᱮᱱᱚᱱ ᱟᱲᱟ ᱠᱟᱛᱮ ᱦᱚ ᱵᱮᱵᱷᱟᱨ ᱦᱩᱭᱟᱜᱼᱟ ᱾ ᱢᱤᱨᱟ ᱟᱲᱟ ᱡᱚᱲᱟᱣ ᱟᱠᱟᱱ ᱛᱮ ᱡᱟᱦᱟᱱ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱟᱨᱮ ᱵᱮᱵᱷᱟᱨᱤᱭᱟᱹ ᱠᱚ ᱯᱮᱱᱴᱟ ᱛᱟᱭᱚᱢ ᱛᱟᱭᱚᱢ ᱛᱮ ᱠᱩᱨᱥᱤ ᱡᱚᱲᱟᱣ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ ᱾
ᱢᱟᱱᱟᱱ
A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Mira ᱠᱩᱨᱥᱤ ᱫᱚ A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Mira ᱠᱩᱨᱥᱤ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - ᱴᱮᱜ ᱠᱚ
- Bending, Metal Profile, Chair, Simple, Elegant
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- ᱜᱚᱵᱮᱥᱚᱱᱟ
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- ᱯᱨᱮᱨᱚᱱᱟ
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
