Nakamura Co. ᱨᱮᱱᱟᱜ Wall V4 ᱴᱮᱞᱤᱵᱷᱤᱡᱚᱱ ᱥᱴᱮᱸᱰ ᱫᱚ ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱰᱤᱡᱟᱭᱤᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2023 A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱨᱩᱯᱟᱯᱷᱟᱨᱱᱤᱪᱟᱨ· 2023
Wall V4 ᱴᱮᱞᱤᱵᱷᱤᱡᱚᱱ ᱥᱴᱮᱸᱰ
Nakamura Co. ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Wall
ᱯᱷᱟᱨᱱᱤᱪᱟᱨ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#148555 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Wall V4 ᱴᱮᱞᱤᱵᱷᱤᱡᱚᱱ ᱥᱴᱮᱸᱰ ᱵᱟᱵᱚᱛ ᱛᱮ
ᱣᱟᱞ ᱵᱷᱤ᱔ (Wall V4) ᱫᱚ ᱢᱤᱫ ᱚᱲᱟᱜ ᱡᱟᱸᱜᱟ ᱨᱮ ᱛᱤᱸᱜᱩ ᱴᱮᱞᱤᱵᱷᱤᱡᱚᱱ ᱥᱴᱮᱸᱰ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱢᱟᱨᱟᱝ ᱥᱠᱨᱤᱱ ᱠᱚ ᱠᱟᱸᱛᱷ ᱥᱩᱨ ᱨᱮ ᱥᱟᱵᱽ ᱫᱚᱦᱚ ᱞᱟᱹᱜᱤᱫ ᱛᱮ ᱛᱮᱭᱟᱨ ᱟᱠᱟᱱᱟ᱾ ᱟᱭᱢᱟ ᱛᱮᱭᱟᱨᱤᱭᱟᱹ ᱠᱚᱣᱟᱜ ᱙᱐ ᱤᱧᱪ ᱦᱟᱹᱵᱤᱫ ᱴᱮᱞᱤᱵᱷᱤᱡᱚᱱ ᱠᱚ ᱠᱩᱥᱤ ᱞᱮᱠᱟᱛᱮ ᱩᱥᱩᱞ ᱨᱮ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱛᱮ ᱞᱟᱴᱷᱟ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ᱾ ᱥᱟᱵᱽ ᱫᱚᱦᱚ ᱠᱷᱩᱸᱴᱤ ᱨᱮ ᱢᱤᱫ ᱢᱤᱫ ᱛᱮ ᱕ ᱢᱤᱢᱤ ᱨᱮᱭᱟᱜ ᱤᱨᱟᱹᱞ ᱜᱚᱴᱟᱝ ᱩᱥᱩᱞ ᱛᱷᱚᱠ ᱢᱮᱱᱟᱜᱼᱟ᱾ ᱠᱮᱵᱚᱞ ᱟᱨ ᱥᱠᱨᱩ ᱠᱚ ᱵᱟᱨ ᱫᱷᱟᱹᱨᱛᱤ ᱯᱮᱱᱮᱞ ᱵᱷᱤᱛᱨᱤ ᱨᱮ ᱩᱠᱩ ᱫᱚᱦᱚᱭᱟᱜᱼᱟ, ᱚᱱᱟᱛᱮ ᱡᱚᱲᱟᱣ ᱴᱷᱟᱶ ᱫᱚ ᱥᱟᱯᱷᱟ ᱛᱟᱦᱮᱸᱱᱟ᱾ ᱛᱟᱞᱠᱟ ᱫᱚ ᱒ ᱢᱤᱢᱤ ᱞᱩᱦᱟ ᱯᱟᱴᱟ ᱠᱷᱚᱱ ᱚᱛᱟ ᱛᱮ ᱨᱩᱯ ᱮᱢ ᱟᱠᱟᱱᱟ ᱟᱨ ᱨᱮᱰᱤᱭᱟᱞ ᱯᱷᱨᱮᱢ ᱛᱮ ᱠᱮᱴᱮᱡ ᱟᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱛᱮ ᱟᱲᱮ ᱫᱚ ᱯᱟᱛᱞᱟ ᱛᱟᱦᱮᱸᱱᱟ ᱟᱨ ᱡᱟᱸᱜᱟ ᱛᱮ ᱛᱚᱯᱚᱫ ᱧᱩᱨ ᱨᱮᱭᱟᱜ ᱵᱚᱛᱚᱨ ᱠᱚᱢᱚᱜᱼᱟ᱾ ᱡᱚᱲᱟᱣ ᱫᱚ ᱟᱞᱜᱟ ᱜᱮᱭᱟ ᱟᱨ ᱚᱲᱟᱜ ᱨᱮ ᱡᱟᱦᱟᱱ ᱵᱚᱫᱚᱞ ᱵᱟᱝ ᱞᱟᱹᱠᱛᱤᱭᱟᱜᱼᱟ᱾
ᱢᱟᱱᱟᱱ
A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Wall V4 ᱴᱮᱞᱤᱵᱷᱤᱡᱚᱱ ᱥᱴᱮᱸᱰ ᱫᱚ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱥᱩᱱᱫᱚᱨ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Wall V4 ᱴᱮᱞᱤᱵᱷᱤᱡᱚᱱ ᱥᱴᱮᱸᱰ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- With WALL V4, almost any TV can be mounted neatly by hanging it on the wall.
Large size TVs (up to 90 inch) from various manufacturers can be installed safely at the preferred height of users. Assembly work is quite simple and requires no special revamping in the room. No wirings or screws are visible externally bringing a sense of harmony and unity with the interior of the user’s living environment. - ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- Width 830mm x Depth 520mm x Height 1265mm
- ᱴᱮᱜ ᱠᱚ
- TV stand, interior, TV accessory, caster, cable storage, audio-visual experience, space-saving design,
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- The structure is based on a 2 mm steel plate that was pressed into a 3D shape and supported by a radial frame in order to achieve a thickness of 2 mm between the base and the floor. The supporting pillar and cables are hidden inside a double-layered panel, The panel slides along that extends when changing the height. Satin powder coating was applied to the entire body, and a woodgrain finish was baked on the surface of the panel giving a texture of high-quality furniture.
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- The challenge was to secure strength in a very thin base structure. Since an iron plate alone does not have enough strength, the base includes a set of enforcing elements radially arranged to complement the strength of the 2 mm plate. This structure provides visual neatness and effective spatial utilization. This method proved its effectiveness through repeated vibration tests in a lab that can simulate the strongest earthquakes in Japan.
- ᱜᱚᱵᱮᱥᱚᱱᱟ
- As conventional TV benches/stands are usually too bulky and easily stands out in a confined room space, our design focused on bringing the TV as close as possible to the wall by reducing the TV stand’s thickness and hiding the TV wiring. Based on the knowledge that a step of 3 mm on the floor can stumble a person, we focused our attention to reduce the thickness of the base for safety reasons so that it makes a simpler and more organized setup.
- ᱯᱨᱮᱨᱚᱱᱟ
- The impetus for developing this new TV stand was to reduce wasted space.
As the size of TVs becomes larger, TV boards are also getting bigger. As for wall-mounted TVs, they require installation work and repeated height adjustment will become a cumbersome process.
WALL V4 provides a solution to such difficulties. - ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The project started in October 2020, and its development was completed in November 2021. The product was put into the market in January 2022.
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- The height of the supporting column can be adjusted with 8 levels (of 5 mm each). Since the metal bracket matches the shape of the back of the TV, it allows fine positional adjustment. Most TV types can be installed at the users’ preferred height. Optional shelves can also be added to expand this TV stand to suit the needs of all users.
- ᱯᱮᱴᱮᱱᱴ ᱠᱚ
- Design Registration No. (Japan): 1614420, 1623536
Patent Registration No. (Japan): 6865495, 6867075
Patent Application No. (Japan): 2020-540017
Design Registration No. (International): DM/101626
Design Registration No. (U.S.): US D881,174 - ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ
- Producer : Akira Nakamura
Designer : Hiroshi Tozawa
Designer : Toshiaki Komori
Supply Chain Manager : Naohisa Inoue - ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ
- Image #1: Photographer Nakamura Co.Variations, 2021.
Image #2: Photographer Nakamura Co.Variations, 2021.
Image #3: Photographer Nakamura Co.Variations, 2021.
Image #4: Photographer Nakamura Co.Variations, 2021.
Image #5: Photographer Nakamura Co.Variations, 2021.
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
