Juan Ospina ᱨᱮᱱᱟᱜ Last Stand পেন্সিল এক্সটেন্ডার ᱫᱚ 3D ᱪᱷᱟᱯᱟ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2023 A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱞᱚᱦᱟ3D ᱪᱷᱟᱯᱟ· 2023
Last Stand পেন্সিল এক্সটেন্ডার
Juan Ospina ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Ospina Umbreit Design
3D ᱪᱷᱟᱯᱟ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#150241 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Last Stand পেন্সিল এক্সটেন্ডার ᱵᱟᱵᱚᱛ ᱛᱮ
লাস্ট স্ট্যান্ড একটা পেন্সিল এক্সটেন্ডার যা ছটা পেন্সিলকো ব্যবহারৎ থাকেয়া লাগিৎ ডিজাইন আকाना। ইনাক শরীরটা রেজিনরେ 3D প্রিন্ট আকান, ব্যাস ১৫ মিলিমিটার আর উচ্চতা ১৫০ মিলিমিটার তায়োম। এখ্খন গটিয়ৎ কেন্দ্র টুকরা, পাঁচ-অক্ষ মেশিনরে অ্যালুমিনিয়াম অ্যালয় খন্দে মেশিন আকান, বলে সানাম করেয়াক লাती পেন্সিল রी-পজিশন করেয়াক দাড়েয়া। একটা ক্যাপ পেন্সিলকে জায়গাতে ধরি রাখেয়া, আর পাছড়ি পয়েন্টটা ক্রাফট কামিলাতী ব্যবহার লাती এম। শরীরটা বার আগে প্রিন্ট আকান, ধাতু টুকরাক ঢুকা'গী, আর বারআ টুকরাক একেয়াক রेজিনরে যুক্ত আকান। লক্ষ্যটা পেন্সিলআক নষ্টগেয়াক কমেয়া।
ᱢᱟᱱᱟᱱ
A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Last Stand পেন্সিল এক্সটেন্ডার ᱫᱚ A' Design Award ᱞᱚᱦᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Last Stand পেন্সিল এক্সটেন্ডার ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- This design is made on 3 phases to be achieved; a cnc dynamic center piece to help re position the pencil every time a sharpener is used to re locate the usable part, same time as playing while being creative which helps most of creative designers to think. this piece is trapped inside so in the one piece body needs to be printed in 2 parts, then the cnc body is inserted and the 2 parts are fused with hand applied resin. the aesthetics influenced by the how was it made rule consumer brains
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- 15mm overall diameter, 150mm height
- ᱴᱮᱜ ᱠᱚ
- resin, pencil, popular, preppy, dynamic, elegant
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- T metal moving center piece is made out of 5 axis cnc machined aluminum alloy, the best part is due to being so small the cost is really worth it. the rest is resin 3d printed on either dlp or sla printer and the final stage is fusing both body parts with the same resin used for printing. The product soul is the most common artifact on existance for designers; a pencil reaching it's last usefull days. It's a perfect match, low cost, short term production, premium aesthetics and most important, reachable to all, almost everyone has a dying pencil
- ᱰᱤᱡᱟᱭᱱ ᱪᱮᱞᱮᱧ
- The hardest part was to find a cheap way to achieve a locked in centerpiece on a resin 3d printed body, its imposible to hold it in place while being printed and due to the centerpiece aesthetics is imposible to insert it in the finished/closed body piece. It couldn't be done by plastic inyection either because of the same problem and body locking to the mold issues. Last and key these kind of gadgets need to be really well balanced between production cost and possible paynment cost. It's totally useless if no one wants to buy it so achieving that perfect cost was the heart to the whole project
- ᱜᱚᱵᱮᱥᱚᱱᱟ
- Design research for new product development. The main objective was giving value to something that already lost it and selling it as better than new instead of reused garbage as most people would see it, same as boosting the aesthetics to achieving the perfect balance between new components but not taking the pencils value away, it had to stay as the core of the project. The methodology used was taking the object to diferent scenarios and letting random people a pencil if they needed to write something down, none of them needed it but all where stuned when they saw the little dying pencil as a loyal all life friend. Smiling people everywhere asking how to acquire one even tho no one really wanted to write, however all wanted to stand with that last stand loyal piece of pencil 223 out of 223 people where desperate to buy it not for being fancy but to give their old pencils one last breath before being the trully term useless. Now we can resignify useless.
- ᱯᱨᱮᱨᱚᱱᱟ
- I'm a creative concept designer so I sketch all the time, I make a minimum of 5 ideas per day, I love the conceptual start conceived with hand analog sketching, therefore I use a lot of pencils. However, I always get these little pieces or pencils leftovers, I love the pencils I work with so I wanted to make something for them to be used until the very last posible instead of having to trow them away because of not having a good grip. Of course always keeping elegant premium design and dynamism
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- This project started on February 2023 in Cali, Colombia and is currently posted on Ospinaumbreitdesign instagram platform, with pre sell focus
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- The dying pencil goes into the body, the cap keeps the pencil in place, the center metal piece helps re positioning the pencil everytime it gets sharpened and controling stress, the back point works for crafts
- ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ
- Juan Ospina
- ᱪᱤᱛᱟᱹᱨ ᱥᱟᱹᱦᱟ
- Image #1: Juan David Ospina (designer, modeler and renderer), Last stand, 2023
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
