Thomas Cassaro and Graham Clark ᱨᱮᱱᱟᱜ Centennial Primary Function: ᱠᱷᱮᱪᱚᱸᱪ ᱛᱤᱨᱯᱟᱹᱭ ᱫᱚ ᱯᱷᱚᱴᱚᱜᱨᱟᱯᱷᱤ ᱩᱯᱠᱟᱨᱚᱱ ᱯᱨᱚᱛᱤᱡᱚᱜᱤᱛᱟ ᱵᱷᱟᱜ ᱨᱮ 2020 A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱨᱮᱱᱟᱜ ᱟᱹᱰᱤ ᱢᱟᱱ ᱟᱠᱟᱱ ᱡᱤᱛᱠᱟᱨ ᱠᱟᱱᱟ᱾
ᱨᱩᱯᱟᱯᱷᱚᱴᱚᱜᱨᱟᱯᱷᱤ ᱩᱯᱠᱟᱨᱚᱱ· 2020
Centennial Primary Function: ᱠᱷᱮᱪᱚᱸᱪ ᱛᱤᱨᱯᱟᱹᱭ
Thomas Cassaro and Graham Clark ᱞᱮᱠᱟᱛᱮ
ᱜᱟᱦᱟᱠ: Colorado Tripod Company
ᱯᱷᱚᱴᱚᱜᱨᱟᱯᱷᱤ ᱩᱯᱠᱟᱨᱚᱱ ᱵᱷᱟᱜ ᱨᱮ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱡᱤᱛᱠᱟᱨ
ᱡᱟᱸᱪ ᱟᱠᱟᱱ ᱮᱣᱟᱨᱰ ᱡᱤᱛᱠᱟᱨ
#90346 ᱞᱟᱜᱤᱫ ᱮᱣᱟᱨᱰ ᱦᱟᱞᱚᱛ ᱡᱟᱸᱪᱰᱤᱡᱟᱭᱤᱱ
Centennial Primary Function: ᱠᱷᱮᱪᱚᱸᱪ ᱛᱤᱨᱯᱟᱹᱭ ᱵᱟᱵᱚᱛ ᱛᱮ
Centennial ᱫᱚ ᱞᱮᱸᱰᱥᱠᱮᱯ ᱠᱷᱮᱪᱚᱸᱪᱤᱭᱟᱹ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱛᱮ ᱛᱮᱭᱟᱨ ᱠᱟᱱ ᱢᱤᱫ ᱛᱟᱞᱟ ᱢᱟᱱᱟᱝ ᱛᱤᱨᱯᱟᱹᱭ ᱠᱟᱱᱟ ᱾ ᱡᱟᱝᱜᱟ ᱠᱚ ᱫᱚ ᱜᱮᱞ ᱛᱷᱚᱠ ᱠᱟᱨᱵᱚᱱ ᱯᱷᱟᱭᱵᱟᱨ ᱛᱮ ᱛᱮᱭᱟᱨ ᱠᱟᱱᱟ, ᱟᱰᱤ ᱡᱚᱨ ᱟᱨ ᱮᱴᱠᱟᱹ ᱦᱟᱞᱠᱟᱹ ᱦᱚᱲᱢᱚ ᱦᱚᱸᱰ ᱮ ᱵᱟᱪᱷᱟᱣ ᱮᱱᱟ ᱾ ᱡᱟᱝᱜᱟ ᱡᱚᱲ ᱟᱨ ᱪᱮᱛᱟᱱ ᱟᱯᱮᱠᱥ ᱫᱚ ᱟᱞᱩᱢᱤᱱᱤᱭᱟᱢ ᱠᱷᱚᱱ CNC ᱢᱟᱥᱤᱱ ᱛᱮ ᱛᱮᱭᱟᱨ ᱠᱟᱱᱟ ᱟᱨ ᱡᱚᱛᱚᱢᱩᱠᱟᱹ ᱯᱷᱤᱱᱤᱥ ᱟᱨ ᱚᱛ ᱛᱟᱦᱮᱸᱱ ᱞᱟᱹᱜᱤᱫ ᱦᱟᱰᱨ ᱮᱱᱚᱰᱟᱭᱡᱽ ᱠᱟᱱᱟ ᱾ ᱟᱞᱩᱢᱤᱱᱤᱭᱟᱢ ᱛᱟᱦᱮᱸᱱ ᱠᱚ ᱨᱮ ᱠᱚᱱᱴᱩᱨ ᱚᱛᱚᱝ ᱠᱚ ᱫᱚ ᱦᱚᱸᱰ ᱮ ᱠᱚᱢ ᱮᱫᱟ ᱟᱨ ᱦᱚᱸ ᱰᱷᱟᱸᱪᱟ ᱫᱚ ᱢᱚᱡᱵᱩᱛᱟ ᱮ ᱫᱚᱦᱚ ᱮᱫᱟ ᱾ ᱴᱩᱡᱽ ᱞᱚᱠ ᱫᱚ ᱞᱚᱜᱚᱱ ᱛᱮ ᱡᱟᱝᱜᱟ ᱡᱟᱨᱩᱲ ᱮ ᱟᱹᱰᱤ ᱮᱫᱟ, ᱟᱨ ᱥᱯᱨᱤᱝ ᱞᱚᱰ ᱞᱤᱵᱷᱟᱨ ᱫᱚ ᱢᱤᱫ ᱛᱤ ᱛᱮ ᱡᱟᱝᱜᱟ ᱠᱚᱱ ᱮ ᱛᱮᱭᱟᱨ ᱮᱫᱟ ᱾ ᱚᱛ ᱡᱟᱲᱮ ᱠᱷᱮᱪᱚᱸᱪ ᱞᱟᱹᱜᱤᱫ ᱛᱟᱞᱟ ᱠᱷᱚᱸᱴᱟ ᱫᱚ ᱚᱰᱚᱠ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱾
ᱢᱟᱱᱟᱱ
A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱵᱟᱵᱚᱛ ᱛᱮ
Centennial Primary Function: ᱠᱷᱮᱪᱚᱸᱪ ᱛᱤᱨᱯᱟᱹᱭ ᱫᱚ A' Design Award ᱨᱩᱯᱟ ᱯᱩᱨᱚᱥᱠᱟᱨ ᱧᱟᱢ ᱟᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱥᱩᱱᱫᱚᱨ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱮᱢ ᱟᱠᱟᱱ ᱥᱚᱢᱟᱱ ᱠᱟᱱᱟ᱾ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱷᱟᱵᱱᱟ ᱟᱨ ᱵᱷᱟᱞᱟᱭ ᱠᱟᱢᱤ ᱡᱷᱟᱞᱠᱟᱣ ᱠᱚ᱾ Centennial Primary Function: ᱠᱷᱮᱪᱚᱸᱪ ᱛᱤᱨᱯᱟᱹᱭ ᱫᱚ ᱠᱚᱞᱟ, ᱣᱤᱜᱭᱟᱱ, ᱰᱤᱡᱟᱭᱤᱱ ᱟᱨ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱨᱮᱭᱟᱜ ᱥᱤᱢᱟ ᱵᱟᱲᱦᱟᱣ ᱟᱨ ᱫᱩᱱᱤᱭᱟ ᱵᱷᱟᱞᱟᱭ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱮᱢ ᱠᱟᱱᱟ᱾
ᱰᱤᱡᱟᱭᱤᱱ ᱯᱤᱪᱷᱟ ᱨᱮ
ᱯᱨᱮᱥ ᱠᱤᱴ
ᱰᱤᱡᱟᱭᱤᱱᱟᱨ ᱧᱮᱞ ᱠᱷᱚᱱ ᱠᱨᱮᱰᱤᱴ, ᱴᱤᱢ ᱥᱫᱚᱥᱭ ᱟᱨ ᱴᱮᱠᱱᱤᱠᱮᱞ ᱵᱤᱵᱚᱨᱚᱬ ᱮᱢ ᱟᱠᱟᱱᱟ᱾
- ᱟᱞᱜᱟ ᱜᱩᱱ ᱠᱚ
- The Centennial is a midsized carbon fiber tripod with machined aluminum legs joints and apex. Contoured holes in the aluminum parts reduce weight while maintaining structural rigidity. Twist locks make leg deployment quick and easy and leg angle adjustments can be performed with one hand via spring loaded levers. The tripod can be used with or without a center column.
- ᱢᱟᱯ ᱟᱨ ᱯᱮᱠᱮᱡᱤᱝ
- Height Without Center Column: 127 cm /
Max Height With Center Column: 158 cm /
Collapsed Length: 52 cm /
Minimum Height: 8.4 cm /
Weight Without Center Column: 1315 g /
Weight With Center Column: 1496 g - ᱴᱮᱜ ᱠᱚ
- tripod, photography, camera, outdoor,
- ᱛᱮᱭᱟᱨ ᱛᱮᱠᱱᱚᱞᱚᱡᱤ
- 10 layer carbon fiber was used for the tripod legs because of its strength-to-weight properties. The leg joints and top apex were CNC machined and hard anodized to provide a smooth finish and corrosion resistance.
- ᱯᱨᱮᱨᱚᱱᱟ
- The Centennial is an everyday, lightweight tripod for landscape photographers. The design is focused on ease of use and stability while keeping the aesthetic clean and minimalistic. Weight is a big concern for photographers taking their tripod in the field, so the apex and top joints are engineered to remove material without compromising rigidity. We studied carbon fiber weaves and construction to ensure the Centennial legs were optimized for strength and weight.
- ᱯᱨᱚᱡᱮᱠᱴ ᱥᱚᱢᱚᱭ
- The project began in mid 2018 and completed in June 2018 with all design and engineering taking place in Denver, CO
- ᱠᱟᱹᱢᱤ ᱦᱚᱨ
- The Centennial tripod legs can be deployed using the three twist locks and the angles adjusted using the spring-loaded levers located on the top joint. These two operations allow the user to level the tripod on uneven ground and adjust the height. The Centennial has a center column which can extend the height to its maximum or the column can be removed to take pictures very close to the ground. At any angle or height the Centennial provides stability and rigidity needed to produce sharp photographs.
- ᱴᱤᱢ ᱥᱮᱫᱟᱭ ᱠᱚ
- Graham Clark
Thomas Cassaro
ᱥᱯᱚᱱᱥᱚᱨᱰ
Designers.org ᱠᱷᱚᱱ ᱯᱟᱨᱚᱢ ᱛᱟᱞᱟᱥ
ᱟᱞᱮᱭᱟᱜ ᱵᱤᱜᱽᱭᱟᱯᱚᱱ ᱥᱟᱹᱜᱟᱹᱭ ᱠᱚ ᱠᱷᱚᱱ ᱯᱨᱚᱰᱟᱠᱴ, ᱥᱮᱵᱟ ᱟᱨ ᱢᱚᱠᱟ ᱩᱫᱩᱜ ᱢᱮ᱾
ᱟᱨᱦᱚᱸ ᱠᱷᱚᱡ ᱢᱮ
ᱥᱟᱹᱜᱟᱹᱭ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ
ᱢᱤᱫ ᱞᱮᱠᱟ ᱠᱮᱴᱮᱜᱚᱨᱤ ᱠᱷᱚᱱ ᱟᱨᱦᱚᱸ ᱯᱩᱨᱥᱠᱟᱨ ᱧᱟᱢᱟᱠᱟᱱ ᱰᱤᱡᱟᱭᱤᱱ ᱠᱚ ᱧᱮᱞ ᱢᱮ, ᱡᱚᱜᱭᱟᱛᱟ ᱧᱮᱞ ᱛᱮ ᱵᱟᱪᱷᱟᱣ ᱟᱠᱟᱱᱟ᱾
