John G Williams طرفان Repose لائونج چيئر انتهائي معتبر 2019 A' Design Award لوهه انعام جو فاتح آهي فرنيچر ڊيزائن مقابلي جي درجي ۾.
لوههفرنيچر· 2019
Repose لائونج چيئر
John G Williams طرفان
ڪلائنٽ: John G Williams Fine Furniture
فرنيچر درجي ۾ A' Design Award لوهه انعام فاتح
تصديق ٿيل ايوارڊ فاتح
ڊزائين #75298 لاءِ ايوارڊ جي حيثيت جي تصديق ڪريوڊزائن
Repose لائونج چيئر بابت
ريپوز هڪ لائونج چيئر آهي، جيڪا مضبوط هارڊ ووڊ ڪاٺ مان ٺاهيل آهي. ان جو فريم آمريڪن ايش ڪاٺ جو آهي، جڏهن ته سيٽ ۽ پٺيءَ وارو حصو آمريڪن والنٽ ڪاٺ مان ٺهيل آهي. گهري گھڙيل سيٽ، ترچن ڪنارن وارن ڪاٺ جي ٺهيل ٽڪرن کي لامينيٽ ڪري تيار ڪئي وئي آهي، جيڪا بيرل ٺاهڻ ۾ استعمال ٿيندڙ ڪوپرنگ طريقيڪار جو هڪ انتهائي ترقي يافته روپ آهي. اندرين موڙ کي خاص اوزارن سان هموار ۽ سنئون بڻايو ويو آهي، جڏهن ته هٿن جي مٿين سطح تي حصن وار بناوت برقرار رکي وئي آهي. پويان ٽنگون ٻاڦ سان موڙي تيار ڪيون ويون آهن، جيڪي هٿن کي مضبوطي ڏيڻ ۾ مدد ڪن ٿيون. ڊرا بور ٽينن جوڙ اضافي مضبوطي مهيا ڪن ٿا. ان ڊزائن جو مقصد اهو هو ته صرف مضبوط ڪاٺ استعمال ڪندي، هڪ گادي واري ڪرسيءَ جهڙو آرام حاصل ڪيو وڃي.
سڃاڻپ
A' Design Award لوهه انعام بابت
Repose لائونج چيئر A' Design Award لوهه انعام جو کٽيندڙ آهي، معزز اعتراف جيڪو انهن سٺين ڊيزائنن کي ڏنو وڃي ٿو جيڪي چڱيءَ طرح ڊزائين ڪيل تخليقن کان متوقع پيشه ورانه ۽ صنعتي گهرجون پوريون ڪن ٿيون. لوهه جا کٽيندڙ پنهنجي خالقن جي وڏي مهارت، اعليٰ ماهري، ماهرانه سمجھ ۽ تخليقي صلاحيت ڏيکارين ٿا. Repose لائونج چيئر کان اميد ڪئي وڃي ٿي ته اهو هڪ تمام گهڻو قدر ڪيل، ساراهيل ۽ پياري تخليق هوندو جيڪو عملي ۽ جدت وارو آهي. هي ڊيزائن جنهن A' Design Award لوهه انعام کٽيو آهي، صنعت جا بهترين طريقا گڏ ڪري ٿو ۽ علم ۽ صلاحيت سان ڳنڍيل قابل ٽيڪنيڪل خاصيتون رکي ٿو. Repose لائونج چيئر جي سنجيدگيءَ ڪري عزت ڪئي وڃي ٿي ۽ اهو زندگيءَ جي معيار ۾ بهتري آڻڻ لاءِ ٺاهيل آهي جيڪا دنيا کي بهتر جڳهه بڻائڻ ۾ مدد ڪري ٿي.
ڊزائن جي پسمنظر
پريس ڪِٽ
ڊزائنر طرفان فراهم ڪيل ڪريڊٽس، ٽيم ميمبرز ۽ ٽيڪنيڪل تفصيلات.
- منفرد خاصيتون
- The Repose lounge chair is constructed from solid timber. The curved form is realized by an extreme form of the 'coopering' process - similar to the process used to construct round barrels from staves of timber.
- ماپ ۽ پيڪيجنگ
- W 800, D 800, H 830 mm
Constructed from solid hardwood timber. Frame: American Ash. Seat and Back: American Walnut.
Joints use draw bore tenon joints for extra strength - ٽيگ
- Lounge, chair, wooden, artisanal, Danish, timber, art
- پيداواري ٽيڪنالاجي
- This chair is not moulded, as some might expect, but is formed from solid timber. The deep sweeping form of the seat is made by laminating various pieces of timber, with angled edges, to form the desired curves. The inside curves are machined into smooth curves with custom made tooling; but the arm uppers retain some of the segmented feel - smooth enough and yet conveying a sense of where the piece came from. The rear legs are steam bent, to retain the overall simplicity, and to attenuate and stabilize the top part of the chair arms. The backrest is also a curved laminated, solid-wood form. It would also be possible to add a thin seat cushion, or perhaps to re-conceive the entire backrest as a custom moulded leather cushion
- ڊزائين چيلينج
- The major unknown was how strong the seat section would be in bending - in other words if someone sat on the arms, would they break? It became apparent that the arms would need additional support given the depth of the form, and the inevitable flexibility (despite steps taken to add strength in the manufacturing process). It was found that the support pins at the rear of the arms were sufficient to stabilize the entire form - which was confirmed through trial and error.
Overall the challenge was to create a lounge chair that, despite being solid timber, would be as comfortable as an upholstered equivalent - تحقيق
- The method drew heavily on the methods used in earlier designs (eg Zene submitted last year), but took these to extremes to experiment with the art of the possible.
New tooling was developed, in the form of a type of drum sander run between centres on a woodworking lathe, to machine the large concave curves - الهام
- The inspirational question behind Repose was: if the design language at the core of the Beke and Zene dining ranges were extended to lounge furniture, what would that look like? Could a form be created out of beautiful solid hardwood timber that was profoundly comfortable even though it may be challenging to manufacture? Could some sort of modern shell design be crafted out of solid timber to yield a beautiful striking new design ?
- منصوبي جو عرصو
- The project was designed and the first prototype built in 4 weeks, starting Dec 2018 and completing in Jan 2019 in Johannesburg South Africa. The design was refined and built in finished materials (Ash and Walnut) over the following 4 weeks.
- عمل جو فلو
- The user settles comfortably down into the seat using the armrests.
Various postures are supported sitting comfortably down in the seat.
Getting back out of the seat is very easy, and facilitated by the arms. - پيٽنٽ
- UK IPO design registration: 6053688
- ٽيم ميمبر
- John G Williams
- تصوير ڪريڊٽ
- All images: John G Williams
اسپانسرڊ
Designers.org کان اڳتي ڳوليو
اسان جي اشتهاري ڀائيوالن جون پراڊڪٽس، خدمتون ۽ موقعا ڳوليو.
وڌيڪ ڳولڻ لاءِ
لاڳاپيل ڊزائنز
ساڳي درجي مان وڌيڪ ايوارڊ جيتندڙ ڊزائنز ڳوليو، جيڪي قابليت جي بنياد تي چونڊيل آهن.
