Hydrospine Freediving Balast od Ludovic Lahccen and Raoul Morel

Dizajn Hydrospine Freediving Balast od dizajnéra Ludovic Lahccen and Raoul Morel je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2023 Strieborná cena A' Design Award v súťažnej kategórii Športové potreby.

StriebornáŠportové potreby· 2023

Hydrospine Freediving Balast

od Ludovic Lahccen and Raoul Morel

Klient: Apnea Sub

Víťaz ocenenia Strieborná cena A' Design Award v kategórii Športové potreby

756,911

Overený víťaz ocenenia

Overiť stav ocenenia pre #148412

Navštíviť stránku Zobraziť na A' Design Award Tlačová správa Ocenenie – odznak

Farby

Dizajn

O dizajne Hydrospine Freediving Balast

Systém chrbtovej záťaže pre freediving, ktorý umožňuje ultra presné vyváženie a vztlak. Jeho prednosti, jeho modulárna a rýchla nosnosť, až 6 kg, použiteľný v akejkoľvek polohe, akejkoľvek disciplíne freedivingu. Je vybavená prackami s rýchlym uvoľnením a nastavovaním, aby ste sa prispôsobili rôznym veľkostiam bez ohľadu na pohlavie, a ponúka neuveriteľné pohodlie, vďaka ktorému rýchlo zabudnete na prenášanú váhu. Jeho dizajn pochádza zo spojenia morských živočíchov a výstroja vytvoreného pre rýchlosť, aby mal veľmi hydrodynamické línie a ponúkal optimálny sklz pod vodou. Jeho všestrannosť z neho robí jedinečný koncept

Ocenenie

O ocenení Strieborná cena A' Design Award

Hydrospine Freediving Balast je laureát Striebornej ceny A' Design Award, mimoriadne prestížneho uznania udeľovaného nádherným, pôsobivým dizajnom najvyššej kvality. Laureáti Striebornej ceny sú nesmierne brilantné a mimoriadne kreatívne diela, ktoré ilustrujú výnimočnú odbornosť, talent a bystrosť svojich dizajnérov. Od Hydrospine Freediving Balast sa očakáva, že bude úžasným, vzorovým dielom, pozoruhodne profesionálnym a hlboko inovatívnym. Tento dizajn ocenený Striebornou cenou A' Design Award je veľmi pozoruhodný, obdivovaný vynález, ktorý prináša úžitok a posúva hranice umenia, vedy, dizajnu a technológie. Hydrospine Freediving Balast je výtvor, ktorému mnohí závidia, ktorý vzbudzuje túžby, prináša pozitívne pocity a vyvoláva úžas a údiv.

Za dizajnom

Tlačový kit

Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.

Jedinečné vlastnosti: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Rozmery a balenie: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Štítky: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Výrobná technológia: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Dizajnérska výzva: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Výskum: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inšpirácia: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Trvanie projektu: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Pracovný postup: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patenty: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Členovia tímu: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Zdroje obrázkov: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel