Horizontal Long Mesh Stojan na ohniská od Shigeru Yamada

Dizajn Horizontal Long Mesh Stojan na ohniská od dizajnéra Shigeru Yamada je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2024 Strieborná cena A' Design Award v súťažnej kategórii Kempingové vybavenie.

StriebornáKempingové vybavenie· 2024

Horizontal Long Mesh Stojan na ohniská

od Shigeru Yamada

Klient: Norinori Life

Víťaz ocenenia Strieborná cena A' Design Award v kategórii Kempingové vybavenie

164,851

Overený víťaz ocenenia

Overiť stav ocenenia pre #153103

Navštíviť stránku Zobraziť na A' Design Award Tlačová správa Ocenenie – odznak

Farby

Dizajn

O dizajne Horizontal Long Mesh Stojan na ohniská

Zatiaľ čo otvorený oheň môže poškodiť trávnik a pôdu, tento ľahký a kompaktný výrobok s rámom z nehrdzavejúcej ocele a konkávnym tvarovaním mriežky vám umožňuje vychutnať si ohnisko v rôznych prostrediach bez rozptyľovania popola či iskier do okolia. Patentovaná konštrukcia v Japonsku umožňuje plameňom prenikať cez mriežku v noci, čo vám umožní sledovať, ako drevo jemne prechádza na popol.

Ocenenie

O ocenení Strieborná cena A' Design Award

Horizontal Long Mesh Stojan na ohniská je laureát Striebornej ceny A' Design Award, mimoriadne prestížneho uznania udeľovaného nádherným, pôsobivým dizajnom najvyššej kvality. Laureáti Striebornej ceny sú nesmierne brilantné a mimoriadne kreatívne diela, ktoré ilustrujú výnimočnú odbornosť, talent a bystrosť svojich dizajnérov. Od Horizontal Long Mesh Stojan na ohniská sa očakáva, že bude úžasným, vzorovým dielom, pozoruhodne profesionálnym a hlboko inovatívnym. Tento dizajn ocenený Striebornou cenou A' Design Award je veľmi pozoruhodný, obdivovaný vynález, ktorý prináša úžitok a posúva hranice umenia, vedy, dizajnu a technológie. Horizontal Long Mesh Stojan na ohniská je výtvor, ktorému mnohí závidia, ktorý vzbudzuje túžby, prináša pozitívne pocity a vyvoláva úžas a údiv.

Za dizajnom

Tlačový kit

Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.

Jedinečné vlastnosti: Most ordinary mesh-type fire pits have the mesh supported from below, but this product has a concave mesh structure that hooks onto the side frames, a structure that did not exist before and for which a patent was obtained (patent 7249692). This unique structure eliminates the weak point of conventional mesh-type fire pits, which are vulnerable to wind and difficult to cook with, while at the same time realizing the unique value of the beautiful flames shining through the mesh.
Rozmery a balenie: Size:
W53cm×D18cm×H32cm(when assembled)
W50cm×D25cm×H5cm(when stored)
Material:
Main body, sidebars, legs: Stainless steel (SUS304)
Mesh sheet: Stainless steel (SUS304) ＊Dovetails are made of aluminum
Storage bag: cotton
Logo sticker: High-gloss paper (water-resistant)
Weight:1.8kg
Štítky: Outdoor, Camping, Bonfire
Výrobná technológia: Conventional mesh-type fire pits were used with the mesh spread out, but while they were lightweight and compact, they were vulnerable to wind and unsuitable for cooking. The mesh is then hooked onto a frame made of stainless steel (which can be assembled and put away in less than 30 seconds), creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash. The ironworker, who is a camper himself, developed this product under the direction of an outside designer to achieve both functionality and aesthetics.
Dizajnérska výzva: The main focus of this product was to hold the woven stainless steel mesh in a U-shape with a frame, but it was also a portable product, so it needed to be compact and lightweight. Therefore, it was necessary to consider a variety of structures that could be easily assembled with a minimum of parts.
Výskum: With the outdoor boom that began in the late 2010s, camping for a small group of one or two people has become especially popular, and a variety of outdoor gears have been sold. Among them, fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with. The new design has a stainless steel frame (which can be assembled and put away in less than 30 seconds) and a structure that hooks onto the mesh, creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash.
Inšpirácia: Fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with.
Trvanie projektu: This product was launched in Japan on September 1, 2021
Pracovný postup: This fire pit was created by an ironworker who is also a camper. The stainless-steel mesh with high combustion efficiency is shaped in a concave that is less susceptible to wind. By using a trivet, a heavy Dutch oven can also be used. It is designed to allow the flames to be seen for its beauty and ease of cooking over an open fire where you can always see the heat level. Tough, minimal, and logical structure with an exquisite finishing. It is true craftsmanship quality that you will appreciate every time you use it.
Patenty: This product is patent pending (Patent Application 2023-011315, filed 1/27/2023) by Noridomi Ironworks Co.,LTD.
Členovia tímu: Creator:Shigeru Yamada
Creative Derector:Takashi Sekimitsu
Assistant Director:Kenzo Noridomi
Zdroje obrázkov: Image #1: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #2: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #3: Director Kenzo Noridomi, Horizontal Long Mesh, 2023.
Image #4: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #5: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.