Dizajn Plan Ta Modulárna váza od dizajnéra Xavier Zhagui je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2024 Železná cena A' Design Award v súťažnej kategórii 3D tlač.

Železná3D tlač· 2024

Plan Ta Modulárna váza

od Xavier Zhagui

Klient: DEZIGN for X

Víťaz ocenenia Železná cena A' Design Award v kategórii 3D tlač

35,987

Overený víťaz ocenenia

Overiť stav ocenenia pre #159751

Navštíviť stránku Zobraziť na A' Design Award Tlačová správa Ocenenie – odznak

Farby

Dizajn

O dizajne Plan Ta Modulárna váza

Dizajnér bol inšpirovaný svojím detstvom obklopeným prírodnými rastlinami a stavebnými kockami vo svojej izbe. To vyvolalo otázku, či existuje spôsob, ako tieto dve veci spojiť. Využitím jedinečných vlastností priestor vypĺňajúcich polyédrov a 3D tlače sa dizajnérovi podarilo nájsť odpoveď na túto otázku. Riešenie sa premietlo do Plan Ta, systému magnetických stavebných blokov na rastliny, ktoré nielen pojmú rôzne izbové rastliny, ale s nimi sa dá aj stavať a hrať.

Ocenenie

O ocenení Železná cena A' Design Award

Plan Ta Modulárna váza je laureát Železnej ceny A' Design Award, prestížneho uznania udeľovaného dobrým dizajnom, ktoré spĺňajú profesionálne a priemyselné požiadavky očakávané od dobre navrhnutých výtvorov. Laureáti Železnej ceny preukazujú veľkú zručnosť, vysokú špecializáciu, odborné porozumenie a tvorivé schopnosti svojich tvorcov. Od Plan Ta Modulárna váza sa očakáva, že bude vysoko cenený, obdivovaný a milovaný výtvor, ktorý je praktický a inovatívny. Tento dizajn ocenený Železnou cenou A' Design Award zahŕňa najlepšie postupy v odvetví a má kompetentné technické vlastnosti spojené s know-how a talentom. Vďaka svojej dôkladnosti si Plan Ta Modulárna váza zaslúži rešpekt a jeho úlohou je prinášať zlepšenia kvality života, ktoré pomáhajú robiť svet lepším miestom.

Za dizajnom

Tlačový kit

Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.

Jedinečné vlastnosti: Utilizing the unique properties of space filling polyhedrons and 3D printing, I was able to create a system of magnetic planter building blocks that you can play and build with. The modular properties of the design allow for space saving advantages by packing multiple planters together into one structure rather than spread out on a surface. A series of sizes has been created to house different types of plants, the smallest being an air plant, and the biggest being a house plant.
Rozmery a balenie: Small Vase
50.8mm x 71.8mm x 50.8mm
Large Vase
127mm x 179.6mm x 127mm
Štítky: 3D Printing, Vase, Modular, digital fabrication, dezignforx
Výrobná technológia: Inner and outer shell are (FDM) 3d printed with a textured finish. Neodymium Sphere magnets are inserted as the connection points. The material is PETG for its water resistance.
Dizajnérska výzva: Creating an intuitive module that functioned both as a planter and building blocks that were fun and easy to build with.
Výskum: Creating a modular form that was intuitive to use and had a simple form led me to research space-filling polyhedrons. Utilizing the rapid prototyping abilities of 3d printing I was able to iterate and experiment with various polyhedron forms to find the most efficient solution. After concluding that rhombic dodecahedron would be the most balanced solution between efficiency and aesthetics, I experimented with different joint connections that would join the modules together. A series of freely rotating magnetic spheres inserted into the vase provided a simple yet effective way of joining the modules together. Material was the final stage of research, 3D printed PLA was the initial choice for its unique characteristics of biodegradability. Unfortunately, it is a very porous material which allowed drainage water leak from the vase. 3D printed PETG was more effective for its water-resistant properties. PETG is not biodegradable compared to PLA, but we are currently researching ways to recycle and cut waste, such as utilizing print to order 3d printing manufacturing strategies compared to wasteful mass production plants.
Inšpirácia: During my childhood I found a deep appreciation for natural plants in my room, and I spent a lot of time playing around and creating with building blocks. I wondered if there was a way to combine the two simple ideas. That question is what drove me to explore different geometries and manufacturing processes such as 3D printing to discover a solution.
Trvanie projektu: The project was started in July 2018 in Las Vegas and is in the final stages of development for production.
Pracovný postup: All vases connect to each other magnetically by aligning the faces of a vase of the same size allowing you to stack them in any axis. A wall mount has also been designed, allowing you to tile any size vase onto a vertical surface. There are two sizes available, a small one and a large one.
For the small vase you simply insert the air plant into the vase and take it out when it needs to be watered. The large vase has two shells, an interior shell where the plant lives in, and the exterior shell that collects the drainage. To ease maintenance, the interior shell can be removed to allow for easier watering and trimming.
Patenty: Patent Pending
Členovia tímu: Xavier Zhagui
Zdroje obrázkov: All Images: Photographer Xavier Zhagui, Plan-Ta, 2024.