Dizajn Moon Stolové Svetlo od dizajnéra Naai-Jung Shih je vysoko uznávaným víťazom veľmi prestížneho ocenenia 2020 Strieborná cena A' Design Award v súťažnej kategórii 3D tlač.

Strieborná3D tlač· 2020

Moon Stolové Svetlo

od Naai-Jung Shih

Klient: Naai-Jung Shih

Víťaz ocenenia Strieborná cena A' Design Award v kategórii 3D tlač

55,849

Overený víťaz ocenenia

Overiť stav ocenenia pre #95451

Navštíviť stránku Zobraziť na A' Design Award Tlačová správa Ocenenie – odznak

Farby

Dizajn

O dizajne Moon Stolové Svetlo

Toto svetlo zohráva aktívnu úlohu pri sprevádzaní ľudí v pracovnom priestore od rána do noci. Bol navrhnutý s ohľadom na pracovné prostredie ľudí. Drôt môže byť pripojený k prenosnému počítaču alebo k napájacej banke. Tvar mesiaca bol vyrobený z troch štvrtín kruhu ako stúpajúca ikona z terénneho obrázka z nerezového rámu. Vzor povrchu mesiaca pripomína sprievodcu pristátím v vesmírnom projekte. Prostredie vyzerá ako socha za denného svetla a svetelné zariadenie, ktoré upokojuje napätú prácu v noci.

Ocenenie

O ocenení Strieborná cena A' Design Award

Moon Stolové Svetlo je laureát Striebornej ceny A' Design Award, mimoriadne prestížneho uznania udeľovaného nádherným, pôsobivým dizajnom najvyššej kvality. Laureáti Striebornej ceny sú nesmierne brilantné a mimoriadne kreatívne diela, ktoré ilustrujú výnimočnú odbornosť, talent a bystrosť svojich dizajnérov. Od Moon Stolové Svetlo sa očakáva, že bude úžasným, vzorovým dielom, pozoruhodne profesionálnym a hlboko inovatívnym. Tento dizajn ocenený Striebornou cenou A' Design Award je veľmi pozoruhodný, obdivovaný vynález, ktorý prináša úžitok a posúva hranice umenia, vedy, dizajnu a technológie. Moon Stolové Svetlo je výtvor, ktorému mnohí závidia, ktorý vzbudzuje túžby, prináša pozitívne pocity a vyvoláva úžas a údiv.

Za dizajnom

Tlačový kit

Kredity, členovia tímu a technické údaje poskytnuté dizajnérom.

Jedinečné vlastnosti: A light should be designed with people working devices in mind. It needs to play an active role today as a companion from morning to the night. The solution is a sculpture in the daylight and a light device that ease the tense of work at night. This light can be connected to laptop. The metaphor of moon was made by linear pattern that was used as a landing guide of Apollo project. The shape of moon is made of three quarters of circle as a rising icon from a terrain made of stainless frame.
Rozmery a balenie: The entire set is about 37 by 33 by 19 cm in width, height, and depth. The materials are photosensitive resin for the moon and stainless steel for the supporting frame.
Štítky: table light, desktop installation, moon, symbolic texture, 3C devices
Výrobná technológia: The source of light is made of LED strip that allocates on the peripheral ring. The stainless frame was collected from a flea market. The moon was made by applying a thicken function to a thin layer of surface. The curvature was modified by a mathematic equation. This shift of design paradigm offers me a great freedom in opening up a whole new set of vocabulary during the creation process. The complicated pattern can only be made by 3D printer. It makes me believe there is a strong connection between the order of mathematics and the aesthetics of a moon icon.
Dizajnérska výzva: The combination of the two layers of pattern changes from different viewing angles. The most challenging part was to create a visual depth and in the meantime allowed partial visual penetration. Uniform thickness was applied. The plate or disk is about 28 mm thick in the center and gradually grows to 35 mm on the edge. It is covered by a skin 8 mm thick. The thickness and the space in the middle create a sense of depth that changes the micro expression of the surface. The final thickness of components was also adjusted with light transmitted without potential damage to the structure in 3D printing.
Výskum: Researches were made to the image of a moon and how a table light should fit in today working space. The alternation of thin gap and media openings has to be maintained in order to guide a flow of focus along the surface. Researches were also made to the textures of the frame that creates a contrast effect with the photosensitive resin. The thickness of pattern was also studied in order to create a depth effect without enlarging the opening. The aesthetic consideration was applied to make a working space more human.
Inšpirácia: This design was inspired by the moon. Moon is both aesthetic and philosophical to the symbolization of human imagination. The composition of this light can be considered as the moon rising from a mountain or the sea as it departs from the surface to light up surroundings in the air.
Trvanie projektu: This project started as early as 2018 in Taipei. Various types of configuration were explored in several on-and-off tests before s particular setting was determined. The specific set was finalized in 2019. The duration of last presentation was about two months of intensive works.
Pracovný postup: The light performances as an installation in daylight. It illuminates as a table light when night arrives. The skin acts as an interface. People can see through the double layers to interact with background with enhanced depth. The convex and concave sides of design represent the surface and underground parts of the moon. The light is turned on or off using a USB hub with buttons to control four devices. It can be connected to a power plug or even a notebook computer. People work next to this light can use it to charge a mobile phone. People gather around this light can share this hub and the light as well.
Zdroje obrázkov: #1: Photographer Naai-Jung Shih, Designing and Photographing, 2019.
#2: Photographer Naai-Jung Shih, Designing and Photographing, 2019.
#3: Photographer Naai-Jung Shih, Designing and Photographing, 2019.
#4: Photographer Naai-Jung Shih, Designing and Photographing, 2019.
#5: Photographer Naai-Jung Shih, Designing and Photographing, 2019.