Airwood Komplet za sestavljanje drona – avtor Uavi Technology

Delo Airwood Komplet za sestavljanje drona avtorja Uavi Technology je izjemno cenjeni dobitnik prestižne nagrade 2020 Železna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje igrač, iger in izdelkov za prosti čas.

ŽeleznaIgrače· 2020

Airwood Komplet za sestavljanje drona

avtor/ica: Uavi Technology

Naročnik: UAVI Technology (Shen Zhen) Limited

Dobitnik nagrade Železna nagrada A' Design Award v kategoriji Igrače

17,987

Potrjeni dobitnik nagrade

Preverite status nagrade za #103852

Obiščite spletno stran Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Airwood Komplet za sestavljanje drona

Airwood je komplet za sestavljanje drona, namenjen otrokom in odraslim. Štiriosni dron uporablja ogrodje iz kompozitne lipove plošče, razrezane na tanke dvomilimetrske koščke z laserskim rezalnikom. Uporabniki lesene plošče in elektronske dele sestavijo ročno ter tako zgradijo dron in daljinski upravljalnik. Modularni krmilniki, motorji in baterije omogočajo izdelavo več različnih ogrodij in videzov iz enega samega kompleta. Dron podpira lebdenje v zaprtih prostorih, zračno fotografiranje in grafično programiranje. Certificiran les zmanjšuje uporabo plastike in kovine.

Priznanje

O nagradi Železna nagrada A' Design Award

Airwood Komplet za sestavljanje drona je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od Airwood Komplet za sestavljanje drona se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si Airwood Komplet za sestavljanje drona zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Dimenzije in embalaža: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Oznake: Drone, Wood, DIY, Modularity, Programmable
Proizvodna tehnologija: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Oblikovalski izziv: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Raziskave: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Inspiracija: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Trajanje projekta: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Potek delovanja: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Patenti: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Zasluge za slike: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.