Thermacut Plazemski gorilnik – avtor David Polasek

Delo Thermacut Plazemski gorilnik avtorja David Polasek je izjemno cenjeni dobitnik prestižne nagrade 2021 Bronasta nagrada A' Design Award v tekmovalni kategoriji Oblikovanje orodij in strojne opreme.

BronastaStrojna oprema· 2021

Thermacut Plazemski gorilnik

avtor/ica: David Polasek

Naročnik: Novo Design

Dobitnik nagrade Bronasta nagrada A' Design Award v kategoriji Strojna oprema

48,158

Potrjeni dobitnik nagrade

Preverite status nagrade za #106220

Obiščite spletno stran Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Thermacut Plazemski gorilnik

Thermacut je plazemski gorilnik, zasnovan za rezanje kovine. Gorilnik je del sistema za plazemsko rezanje, ki z uporabo plina in elektrike ustvari plamen s temperaturo 20.000 stopinj Celzija, kar omogoča rezanje jekla debeline do 40 milimetrov. Ergonomski ročaj omogoča več različnih položajev prijema. Gorilnik je mogoče držati z zaprto dlanjo okoli ročaja ali s palcem, naslonjenim na vrh ročaja. Varnostni sprožilec preprečuje nenamerno delovanje. Glavno ohišje je izdelano iz plastike z injekcijskim brizganjem, ostali deli pa so izdelani iz bakra, medenine, jekla, keramike in gume.

Priznanje

O nagradi Bronasta nagrada A' Design Award

Thermacut Plazemski gorilnik je prejemnik Bronaste nagrade A' Design Award, zelo prestižnega priznanja, ki se podeljuje izjemnim oblikovanjem, ki se odlikujejo po ustvarjalnosti, iznajdljivosti in bistrosti. Prejemniki Bronaste nagrade so v celoti spretni in presenetljivo ustvarjalni artefakti, ki potrjujejo bogate izkušnje, domišljijo in zvitost svojih oblikovalcev. Od Thermacut Plazemski gorilnik se pričakuje, da bo visoko cenjen, občudovan in ljubljen predmet, opazno profesionalen in inovativen. To oblikovanje, nagrajeno z Bronasto nagrado A' Design Award, vključuje najboljše prakse v umetnosti, znanosti, oblikovanju in tehnologiji ter je odlično po pozornosti do podrobnosti. Thermacut Plazemski gorilnik sijajno zadovoljuje potrebe, se dotika želja, očara čustva in vzbuja radovednost.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: Thermacut plasma torch brings new design of handle for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000 celsius degree to cut metal materials up to 40mm thick. The handle includes safety trigger and offers multiple ways of holding for plasma operators. You can hold device with closed palm around handle or with the thumb on the top of the handle.
Dimenzije in embalaža: Width 256mm x Depth 39mm x Height 148mm
Oznake: Thermacut, Extrafire, Plasma, Torch, Cutting, Metal, Handle, Ergonomics
Proizvodna tehnologija: Plasma torch consists from metal technology parts which are made of copper, grass and steel. Main case is made of plastic using injection molding technology for mass production. Another parts are made of ceramic, rubber, etc.
Oblikovalski izziv: The bigger challenge of whole development process was the fusion of design styling and technology inside that device. We tried to find optimal solution how to connect well looking product with perfect ergonomic feature and production quality. Another challenge was fitting all technology parts into tight plastic case.
Raziskave: The plasma torch Thermacut is product by worldwide producer of plasma cutting systems for manufacturing industry with more than 25 years experience in this industry. Thermacut Extrafire brings new design of handle construction for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000°C. Plastic handle is a shell for plasma cutting torch assembly that carries plasma consumables. Handle with torch body is connected with plasma power supply that delivers current for torch operation. This torch and handle is designed for air cutting applications and works up to 105Amp cutting steel materials up to 40mm thick. Ergonomic handle offers multiple ways of holding for plasma operators. The operator can hold torch ordinarily with closed palm around handle or with the thumb on the top of the handle using special thumb rest spot as support for better leading the torch during cutting process. The handle includes safety trigger to turn the torch on only when operator wants and can not cause injury of operator.
Inspiracija: New product design comes from previous series partly and brings new attitude of dynamic ergonomic construction. Body shape with new proportion is more comfortable to hold and opperate during work process. The handle offers more options how to hold device in hand due to organic form and rigorously defined grip fields.
Trajanje projekta: The project development of technology and design started in December 2015 in Zlin district in Czech Republic and finished in May 2020 in Czech Republic.
Potek delovanja: Plasma torch uses high temperature flame to cut steel and another metal materials up to 40mm thick. Due to ergonomic handle it is easy and comfy to operate this device safely and correctly. 20.000 celsius degree flame comes into being via ionization of gas nad electricity. Plasma cutting is used in industry mainly, but is available for home improvements and work as well.
Patenti: Copyright 2020, David Polasek - Novo Design & Thermacut k.s. company, Czech Republic.
Člani ekipe: R&D Engineer: Zdeněk Lapčík, R&D Engineer: Tomáš Kusák
Zasluge za slike: Image 1: Creator (designer) David Polasek, Image 2: Creator (designer) David Polasek, Image 3: Creator (designer) David Polasek, Image 4: Creator (designer) David Polasek, Image 5: Creator (designer) David Polasek