Delo Arch Stol, Stol brez naslonjala avtorja Edvard Glazebrook je izjemno cenjeni dobitnik prestižne nagrade 2021 Bronasta nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pohištva.
BronastaPohištvo· 2021
Arch Stol, Stol brez naslonjala
avtor/ica: Edvard Glazebrook
Dobitnik nagrade Bronasta nagrada A' Design Award v kategoriji Pohištvo
Potrjeni dobitnik nagrade
Preverite status nagrade za #106853Dizajn
O dizajnu Arch Stol, Stol brez naslonjala
Arch je stol in sedež brez naslonjala, izdelan iz rezljanega in črno luženega lameliranega borovega lesa. Zasnova temelji na preprostih in ponavljajočih se oblikah, ki pohištvu dajejo homogen in logičen izraz. Pet enakih lokov tvori noge in naslonjalo stola, medtem ko je sedež brez naslonjala sestavljen iz treh polovičnih lokov, ki se stikajo v sredini. Vsi deli so izrezani iz lameliranega lesenega panela s pomočjo CNC rezkalnika, nato pa zlepljeni in spojeni z lesenimi zatiči. Ukrivljene linije okrepijo pohištvo na njegovih najšibkejših točkah.
Priznanje
O nagradi Bronasta nagrada A' Design Award
Arch Stol, Stol brez naslonjala je prejemnik Bronaste nagrade A' Design Award, zelo prestižnega priznanja, ki se podeljuje izjemnim oblikovanjem, ki se odlikujejo po ustvarjalnosti, iznajdljivosti in bistrosti. Prejemniki Bronaste nagrade so v celoti spretni in presenetljivo ustvarjalni artefakti, ki potrjujejo bogate izkušnje, domišljijo in zvitost svojih oblikovalcev. Od Arch Stol, Stol brez naslonjala se pričakuje, da bo visoko cenjen, občudovan in ljubljen predmet, opazno profesionalen in inovativen. To oblikovanje, nagrajeno z Bronasto nagrado A' Design Award, vključuje najboljše prakse v umetnosti, znanosti, oblikovanju in tehnologiji ter je odlično po pozornosti do podrobnosti. Arch Stol, Stol brez naslonjala sijajno zadovoljuje potrebe, se dotika želja, očara čustva in vzbuja radovednost.
V ozadju dizajna
Komplet za medije
Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.
- Edinstvene lastnosti
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Dimenzije in embalaža
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Oznake
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Proizvodna tehnologija
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Oblikovalski izziv
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Raziskave
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspiracija
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Trajanje projekta
- The project started in march 2020 - and finished in late May 2020.
- Potek delovanja
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patenti
- Copyrights belong to Edvard Glazebrook, 2020
- Člani ekipe
- Edvard Glazebrook
Sponzorirano
Raziščite onkraj Designers.org
Odkrijte izdelke, storitve in priložnosti naših oglaševalskih partnerjev.
Odkrijte več
Sorodni dizajni
Raziščite več nagrajenih dizajnov iz iste kategorije, izbranih po kakovosti.
