Aspen Glava za stativ – avtor Colorado Tripod Company

Delo Aspen Glava za stativ avtorja Colorado Tripod Company je izjemno cenjeni dobitnik prestižne nagrade 2021 Srebrna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje fotoaparatov in fotografske opreme.

SrebrnaFotografska oprema· 2021

Aspen Glava za stativ

avtor/ica: Colorado Tripod Company

Naročnik: Colorado Tripod Company

Dobitnik nagrade Srebrna nagrada A' Design Award v kategoriji Fotografska oprema

39,753

Potrjeni dobitnik nagrade

Preverite status nagrade za #108315

Obiščite spletno stran Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Aspen Glava za stativ

Aspen je glava za stativ, zasnovana za poenostavitev fotografske kompozicije. Odprt okvir omogoča, da se pritrjeni fotoaparat zavrti precej čez 90 stopinj v obe smeri, kar omogoča hiter prehod med ležečo in pokončno usmeritvijo brez okornih L-nosilcev. Kroglica ima votlo jedro z luknjami, ki zmanjšujejo težo, hkrati pa ohranjajo trdnost. Nastavljiva vzvodna sponka drži široko paleto plošč za fotoaparate, nadzor trenja nastavi upor, zaklep za panoramsko vrtenje pa omogoča polno rotacijo za panoramske fotografije. Aspen je izdelan iz trdo eloksiranega aluminija.

Priznanje

O nagradi Srebrna nagrada A' Design Award

Aspen Glava za stativ je prejemnik Srebrne nagrade A' Design Award, izjemno prestižnega priznanja, ki se podeljuje čudovitim, impresivnim vrhunskim oblikovanjem. Prejemniki Srebrne nagrade so izjemno briljantna in zelo ustvarjalna dela, ki ponazarjajo izjemno strokovnost, talent in bistrost svojih oblikovalcev. Od Aspen Glava za stativ se pričakuje, da bo čudovito, zgledno delo, opazno profesionalno in globoko inovativno. To oblikovanje, nagrajeno s Srebrno nagrado A' Design Award, je zelo opazen, občudovan izum, ki koristi in premika meje umetnosti, znanosti, oblikovanja in tehnologije. Aspen Glava za stativ je stvaritev, ki ji mnogi zavidajo, ki prebuja želje, prinaša pozitivna čustva in vzbuja začudenje in občudovanje.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
Dimenzije in embalaža: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
Oznake: tripod head, ball head, camera support, tripod, photography accessory
Proizvodna tehnologija: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
Oblikovalski izziv: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
Raziskave: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
Inspiracija: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
Trajanje projekta: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
Potek delovanja: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
Patenti: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
Člani ekipe: Colorado Tripod Company