Shamim Polymer Tovarna – avtor Davood Boroojeni

Delo Shamim Polymer Tovarna avtorja Davood Boroojeni je izjemno cenjeni dobitnik prestižne nagrade 2021 Srebrna nagrada A' Design Award v tekmovalni kategoriji Arhitektura, gradnja in oblikovanje konstrukcij.

SrebrnaArhitektura· 2021

Shamim Polymer Tovarna

avtor/ica: Davood Boroojeni

Naročnik: Shamim Polymer Co.

Dobitnik nagrade Srebrna nagrada A' Design Award v kategoriji Arhitektura

37,585

Potrjeni dobitnik nagrade

Preverite status nagrade za #118679

Obiščite spletno stran Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Shamim Polymer Tovarna

Obrat mora vzdrževati tri programe, vključno s proizvodnim obratom ter laboratorijem in pisarno. Pomanjkanje definiranih funkcionalnih programov pri tovrstnih projektih je razlog za njihovo neprijetno prostorsko kakovost. Ta projekt želi rešiti ta problem z uporabo cirkulacijskih elementov za razdelitev nepovezanih programov. Zasnova stavbe se vrti okoli dveh praznih prostorov. Ti prazni prostori ustvarjajo priložnost za ločevanje funkcionalno nepovezanih prostorov. Hkrati deluje kot srednje dvorišče, kjer je vsak del stavbe povezan med seboj.

Priznanje

O nagradi Srebrna nagrada A' Design Award

Shamim Polymer Tovarna je prejemnik Srebrne nagrade A' Design Award, izjemno prestižnega priznanja, ki se podeljuje čudovitim, impresivnim vrhunskim oblikovanjem. Prejemniki Srebrne nagrade so izjemno briljantna in zelo ustvarjalna dela, ki ponazarjajo izjemno strokovnost, talent in bistrost svojih oblikovalcev. Od Shamim Polymer Tovarna se pričakuje, da bo čudovito, zgledno delo, opazno profesionalno in globoko inovativno. To oblikovanje, nagrajeno s Srebrno nagrado A' Design Award, je zelo opazen, občudovan izum, ki koristi in premika meje umetnosti, znanosti, oblikovanja in tehnologije. Shamim Polymer Tovarna je stvaritev, ki ji mnogi zavidajo, ki prebuja želje, prinaša pozitivna čustva in vzbuja začudenje in občudovanje.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: This project seeks to increase sense of connecting spaces to improve the quality of life of factory workers. The concept of this complex took place in two outdoor void spaces perpendicular to each other. The geometry of these void spaces makes separation of different parts possible and acts as a middle courtyard for connecting different areas with each other. Human dimensions, open air, light and shadow, green space and color increase the sense of middle courtyard.
Dimenzije in embalaža: The project proposal is related to a factory for the production of polymeric materials. The factory has a production, office and research department. The project land is approximately square like (60 meters long and 50 meters wide) is limited to the neighbor in the north and west and to the street in the south and east. This land with an area of three thousand square meters is located in a small industrial town in Alborz province of Iran.
Oznake: Industrial Architecture, Factory, Iran, Middle Courtyard, Concrete, Office, Cruciform Axes, Green Roof, Exposed Materials, Davood Boroojeni
Proizvodna tehnologija: In Iran there have been specific patterns for organizing building plans from the past. The middle courtyard and the cruciform axes are two important patterns in Iranian architecture. It is believed that the prediction of these two patterns in the architectural design of this project is an attempt to revitalize these two Iranian architectural methods in industrial uses.
Oblikovalski izziv: The most important challenge in designing industrial uses is the proper separation of different work spaces. For this purpose instead of a wall we used space to separate different parts. The middle courtyards prediction helped to separate various parts of the factory properly. Other challenge was the possibility of leaving this middle courtyard abandoned. To meet this challenge we increased the spatial quality of the middle courtyard by observing human dimensions and considering open air for it and predicting the light and shadow play and green space and color.
Raziskave: In this project, design methodology used quantitative and qualitative. The paramount goals of this project focused on best achieving, Appropriate Functionality, Provision of Desired Spatial Quality, Restoration of Middle Courtyard and Consumption Reduction of Energy and Construction Material. It is to note that such data gathering and assessment techniques utilized as field observation, review of architectural standards, identification of employer needs, review of relevant historical background, technical analysis of construction material, and last but not the least an assessment on the region climate.
Inspiracija: Factors such as the desired spatial quality, local architecture, climate and exposed usage of materials have been considered in the project design. We believe that beautiful innovative useful architecture of Shamim Polymer factory is the result of using the above mentioned factors in the project simultaneously.
Trajanje projekta: The project started in May 2019 and finished in November 2020.
The project is located in a small industrial town in Alborz province of Iran.
Potek delovanja: One of our primary goals of design was to expose materials. We believe that the uses of exposed materials not only creates an industrial feel in the spaces, also makes less harm to the environment. Structures are made of steel, floors are made of concrete, walls are made of prefabricated concrete blocks, glass, prefabricated concrete panels, and stairs are made of in-site concrete without any other materials being added.
Člani ekipe: Principal Architect: Davood Boroojeni
Design Team: Saba Ammari
Design Team: Hamed Kalateh
Civil Engineer: Bardia Khafaf
Mechanical Engineer: Hamidreza Nikzad
Mechanical Engineer: Mohsen Jafari
Electrical Engineer: Amir Salamat
Executive Team: Barbod Mokhtari
Executive Team: Emran Nazarian
Zasluge za slike: All photos : Photographer Parham Taghioff