Delo Bend Klubska Mizica avtorja Jan Goderis je izjemno cenjeni dobitnik prestižne nagrade 2023 Bronasta nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pohištva.
BronastaPohištvo· 2023
Bend Klubska Mizica
avtor/ica: Jan Goderis
Dobitnik nagrade Bronasta nagrada A' Design Award v kategoriji Pohištvo
Potrjeni dobitnik nagrade
Preverite status nagrade za #148865Dizajn
O dizajnu Bend Klubska Mizica
Miza je izdelana iz dveh upognjenih aluminijastih plošč, ki se prilegata skupaj. Sestavljeni plošči segata vse do nog. To daje oblikovanju določeno preglednost in lahkotnost, navpično shranjevanje pa je ustvarjeno za revije, časopise in karo. Med zgornjima ploščama je tudi možnost shranjevanja na obeh straneh mize.
Priznanje
O nagradi Bronasta nagrada A' Design Award
Bend Klubska Mizica je prejemnik Bronaste nagrade A' Design Award, zelo prestižnega priznanja, ki se podeljuje izjemnim oblikovanjem, ki se odlikujejo po ustvarjalnosti, iznajdljivosti in bistrosti. Prejemniki Bronaste nagrade so v celoti spretni in presenetljivo ustvarjalni artefakti, ki potrjujejo bogate izkušnje, domišljijo in zvitost svojih oblikovalcev. Od Bend Klubska Mizica se pričakuje, da bo visoko cenjen, občudovan in ljubljen predmet, opazno profesionalen in inovativen. To oblikovanje, nagrajeno z Bronasto nagrado A' Design Award, vključuje najboljše prakse v umetnosti, znanosti, oblikovanju in tehnologiji ter je odlično po pozornosti do podrobnosti. Bend Klubska Mizica sijajno zadovoljuje potrebe, se dotika želja, očara čustva in vzbuja radovednost.
V ozadju dizajna
Komplet za medije
Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.
- Edinstvene lastnosti
- The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
- Dimenzije in embalaža
- Dimensions: 125 x 55 x 28 cm
- Oznake
- coffee table, folded table, ecological design, functional design, minimal design
- Proizvodna tehnologija
- Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
- Oblikovalski izziv
- The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
- Raziskave
- The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
- Inspiracija
- The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
- Trajanje projekta
- The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
- Potek delovanja
- The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
- Patenti
- e-depot: 000595853
- Člani ekipe
- Jan Goderis
- Zasluge za slike
- #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022
Sponzorirano
Raziščite onkraj Designers.org
Odkrijte izdelke, storitve in priložnosti naših oglaševalskih partnerjev.
Odkrijte več
Sorodni dizajni
Raziščite več nagrajenih dizajnov iz iste kategorije, izbranih po kakovosti.
