Plexus Sistem Spajanja – avtor Subinay Malhotra

Delo Plexus Sistem Spajanja avtorja Subinay Malhotra je izjemno cenjeni dobitnik prestižne nagrade 2025 Železna nagrada A' Design Award v tekmovalni kategoriji Generativno, algoritemsko, parametrično in z UI podprto oblikovanje.

ŽeleznaGenerativno· 2025

Plexus Sistem Spajanja

avtor/ica: Subinay Malhotra

Naročnik: Subinay Malhotra Designworks

Dobitnik nagrade Železna nagrada A' Design Award v kategoriji Generativno

63,818

Potrjeni dobitnik nagrade

Preverite status nagrade za #171156

Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Plexus Sistem Spajanja

Plexus je modularni sistem spajanja, ustvarjen z generativnim oblikovanjem in prilagodljivimi konektorji. Sistem povezuje dele brez tradicionalnih pritrdilnih elementov, kar omogoča gladke prehode med površinami in strukturami. Komponente so izdelane s postopkom litja po izgubljenem vosku iz voščenih modelov, izdelanih s 3D tiskanjem. Algoritemska mreža ojača točke obremenitve in zmanjša količino uporabljene kovine. Anodiziranje z nizkim vplivom na okolje in netoksično prevlečenje izboljšata trajnost in kakovost površine. Plexus omogoča sestavljanje in ponovno konfiguracijo v številnih aplikacijah.

Priznanje

O nagradi Železna nagrada A' Design Award

Plexus Sistem Spajanja je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od Plexus Sistem Spajanja se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si Plexus Sistem Spajanja zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: Plexus redefines modular joinery by integrating generative design with adaptable connection systems, allowing seamless transformation into various applications. Its innovative joining method enables fluid transitions between surfaces and structures, eliminating conventional fasteners while enhancing strength, flexibility, and scalability. Combining advanced metal treatments with precision-engineered connections, Plexus challenges traditional assembly processes by giving reconfigurable solutions
Dimenzije in embalaža: 218mm x 175mm x 162mm
Oznake: generative design, modular joinery, parametric modeling, lost-wax casting, eco-friendly plating, sustainable manufacturing, computational fabrication, adaptive structures, material efficiency, algorithmic mesh
Proizvodna tehnologija: Plexus utilizes 3D-printed wax patterns combined with lost-wax casting to achieve intricate, high-precision modular joinery. The generative design is first developed through parametric modeling, then translated into wax prototypes via SLA 3D printing. These wax models undergo investment casting, producing durable metal components with seamless, organic forms. The system integrates custom anodization, electroplating, and multi-material hybridization, enhancing surface properties, durability, and aesthetic adaptability, redefining traditional joinery through advanced computational fabrication techniques.
Oblikovalski izziv: The biggest challenge in Plexus was balancing structural integrity with material reduction while maintaining seamless adaptability. Algorithmic joinery required extensive computational testing to optimize mesh density for load-bearing efficiency without overusing metal. Overcoming manufacturing constraints in lost-wax casting and eco-plating demanded collaboration with fabricators to refine tolerances. Bridging generative design with real-world production was key to making Plexus both scalable and sustainable.
Raziskave: Plexus is based on experimental design research exploring algorithmic joinery and modular assembly, with a focus on reducing unnecessary metal use through optimized material distribution and eco-friendly plating techniques. The objective was to create a seamless, reconfigurable connection system that enhances efficiency, sustainability, and adaptability. Using parametric modeling and computational simulations, the study analyzed load distribution and material behavior to eliminate excess material in non-critical areas. Data was gathered through digital stress tests and 3D-printed prototypes, refined via lost-wax casting and advanced metal treatments. Participants included engineers, designers, and fabricators, who provided insights into usability, strength, and scalability. The research demonstrated that generative mesh structures strategically reduce metal usage while maintaining structural integrity. Additionally, eco-friendly plating techniques, such as low-impact anodization and non-toxic electroplating, were integrated to enhance durability and environmental sustainability. This innovation enables sustainable manufacturing, minimizing waste while enhancing performance and flexibility. The impact extends to product design, architecture, and adaptive manufacturing, offering an efficient, high-performance alternative to traditional joinery.
Inspiracija: Inspired by nature’s seamless connections and biological structures, Plexus reimagines traditional joinery through generative design and modular adaptability. The project stems from parametric design, biomimicry, and material efficiency research, seeking to eliminate rigid fasteners in favor of fluid, scalable connections. By integrating algorithmic modeling with precision engineering, Plexus introduces a versatile, reconfigurable system that adapts across multiple applications.
Trajanje projekta: The project started in August 2024 and was produced by February 2025. Plexus Joinery has been published globally, receiving recognition across various platforms.
Potek delovanja: Plexus utilizes an algorithmically generated mesh structure within its modular joinery system, ensuring optimal strength and weight distribution. The mesh is parametrically designed to reinforce stress points, allowing the structure to withstand significant loads while maintaining a lightweight, organic form. This adaptive approach enables seamless assembly, transformation, and reconfiguration without traditional fasteners, enhancing structural integrity, user interaction, and aesthetic fluidity in a scalable design solution.
Člani ekipe: Subinay Malhotra
Zasluge za slike: Image #1: Plexus Joinery
Image #2: In Context
Image #3: In context
Image #4: In context
Image #3: Function