Trinity Kozarec za pitje – avtor Ivilina Miteva

Delo Trinity Kozarec za pitje avtorja Ivilina Miteva je izjemno cenjeni dobitnik prestižne nagrade 2026 Železna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje pekačev, namizne posode, kozarcev in kuhinjske posode.

ŽeleznaKuhinjska posoda· 2026

Trinity Kozarec za pitje

avtor/ica: Ivilina Miteva

Naročnik: Ivilina Miteva

Dobitnik nagrade Železna nagrada A' Design Award v kategoriji Kuhinjska posoda

111,022

Potrjeni dobitnik nagrade

Preverite status nagrade za #182123

Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Trinity Kozarec za pitje

Trinity je sodobna kolekcija steklenih izdelkov, ki na novo opredeljuje kozarec za pitje z reverzibilnim oblikovanjem. Vsak od treh kosov deluje v dveh orientacijah in v eni sami obliki ponuja različne prostornine in izkušnje. Njegova minimalistična geometrija odpravlja razlikovanje med dnom in robom ter uporabnikom omogoča, da s preprosto kretnjo na novo določijo funkcijo. Trinity, izdelan iz vzdržljivega borosilikatnega stekla, ki ga je mogoče reciklirati, združuje trajnost s preciznostjo, rezultat pa je prefinjeno, a hkrati igrivo oblikovanje, ki spodbuja interakcijo.

Priznanje

O nagradi Železna nagrada A' Design Award

Trinity Kozarec za pitje je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od Trinity Kozarec za pitje se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si Trinity Kozarec za pitje zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: Three sizes for various occasions. This set consists of three visually identical glasses with different volumes. The rigid geometry of the shape is enriched not only by colors, but also by tongue-in-cheek evocative design, making these glasses a valued addition to any bar or household. The different volumes of the "stool" half call to be filled with various drinks.
Dimenzije in embalaža: Trinity S: Content 200/200ml, Diameter 103/64mm, Height 130mm
Trinity M: Content 200/300ml, Diameter 103/64mm, Height 160 mm
Trinity L: Content 200/380ml, Diameter 103/64mm, Height 190mm
Oznake: tableware, drinkware, glassware, drinking glass, tumbler, glass, borosilicate
Proizvodna tehnologija: The Trinity glassware series is made from borosilicate glass, known for its durability and resistance to hot and cold temperature. The glass can be molded and crafted in a variety of thicknesses. It is an infinitely recyclable material that can be re-melted again and again, minimizing waste and environmental impact.
Oblikovalski izziv: The primary creative challenge was reconciling reversibility with ergonomic and structural integrity. Designing a glass that performs equally well in two orientations required eliminating the conventional hierarchy between base and rim, while maintaining stability, comfort and visual balance.
Raziskave: The research question centered on whether a single glass form could successfully operate in two orientations without compromising stability, ergonomics, or aesthetic coherence. Material research focused on the properties of borosilicate glass - thermal resistance, weight reduction potential, and tensile strength - allowing exploration of refined wall thickness while maintaining durability.
Inspiracija: The project started for the 2024 Traga Open Call. This Drinkware collection originates from the concept of double-use glasses, objects capable of shifting function through inversion. The three glasses are conceived as reversible forms. Each piece is designed to function in two orientations, allowing variations in volume, proportion, and drinking experience. By simply turning the object, the user redefines its purpose.
Trajanje projekta: The project was initiated in 2024, in response to the Traga Open Call. Concept development began with research into reversible drinkware and functional double-use systems.
Potek delovanja: The user intuitively explores both ends of the glass, discovering distinct rim diameters and capacities. The act of turning the glass becomes a part of the ritual. Flow is guided by calibrated geometry. Rim thickness is optimized for comfort and controlled liquid delivery, while curvature directs the beverage smoothly toward the lip.