LumiBee Smolni 3D tiskalnik – avtor Davide Marin

Delo LumiBee Smolni 3D tiskalnik avtorja Davide Marin je izjemno cenjeni dobitnik prestižne nagrade 2021 Železna nagrada A' Design Award v tekmovalni kategoriji Oblikovanje 3D tiskanih oblik in izdelkov.

Železna3D tiskanje· 2021

LumiBee Smolni 3D tiskalnik

avtor/ica: Davide Marin

Naročnik: Lumi Industries

Dobitnik nagrade Železna nagrada A' Design Award v kategoriji 3D tiskanje

29,011

Potrjeni dobitnik nagrade

Preverite status nagrade za #87531

Obiščite spletno stran Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu LumiBee Smolni 3D tiskalnik

LumiBee je kompakten smolni 3D tiskalnik, zasnovan za domačo uporabo. Tiskalnik uporablja s svetlobo utrjevalno tekočo smolo, pri čemer kot vir svetlobe služi zaslon mobilnega telefona, ki je vstavljen znotraj naprave. Krmilna aplikacija digitalni model razreže v horizontalne prereze, ki se prikažejo na zaslonu, svetloba pa smolo utrjuje plast za plastjo. Približno 95 odstotkov delov naprave LumiBee je mogoče izdelati s cenovno ugodnim 3D tiskalnikom na osnovi filamenta. Konstrukcija je modularna, vsak segment pa ima specifično funkcijo in ga je mogoče poljubno prilagoditi.

Priznanje

O nagradi Železna nagrada A' Design Award

LumiBee Smolni 3D tiskalnik je prejemnik Železne nagrade A' Design Award, prestižnega priznanja, ki se podeljuje dobrim oblikovanjem, ki izpolnjujejo profesionalne in industrijske zahteve, pričakovane od dobro zasnovanih stvaritev. Prejemniki Železne nagrade kažejo veliko spretnost, visoko specializacijo, strokovno razumevanje in ustvarjalne zmožnosti svojih ustvarjalcev. Od LumiBee Smolni 3D tiskalnik se pričakuje, da bo visoko cenjena, občudovana in ljubljena stvaritev, ki je praktična in inovativna. To oblikovanje, nagrajeno z Železno nagrado A' Design Award, vključuje najboljše prakse panoge in ima kompetentne tehnične lastnosti, povezane s strokovnim znanjem in talentom. Zaradi svoje temeljitosti si LumiBee Smolni 3D tiskalnik zasluži spoštovanje in je zasnovan tako, da zagotavlja izboljšave kakovosti življenja, ki pomagajo narediti svet boljši kraj.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: The LumiBEE is a unique compact 3D Printer that uses photosensitive liquid resin. It has been designed so that 95% of its parts can be printed with a Filament 3D home Printer. The LumiBee is also particular since it uses the screen of a mobile phone, inserted inside, to transform the liquid resin into a three-dimensional object. Its structure is modular, where segments, each with a specific function, can be modified and customized.
Dimenzije in embalaža: Size approx. 120 x 120 x140 mm.
Oznake: 3d printer, DIY, 3d printable, open source, 3d printing
Proizvodna tehnologija: The 95% of the parts of the LumiBee 3D Printer can be produced with an FFM 3D printer. This means that the production of the LumiBee is very lean. It can be sold as a ready to use product, or as an assembly kit, or the user can even just purchase the digital files and produce the parts at home, as long as he/she has access to another low cost 3d printer. Many schools, maker spaces and laboratory offer the use of a 3d printer for free or for a low fee, so this is also an option for the user who wants to just buy the digital files.
Oblikovalski izziv: One of the challenges was to optimize the design so that the production of the parts of the Lumibee (that are 3D printed) takes as less time as possible. Normally medium and big sized 3d printed parts take hours to be fabricated, so we went through many different iterations to minimize the manufacturing time.
Raziskave: The goal of this project studied the feasibility of using the light emitted from screen of a smartphone, without modifications, to induce a chemical reaction where, in this case, a liquid is turned into a solid, in a small tank of liquid resin. A tray inside the tank moves vertically, 0.1mm at a time. A 3D model file is opened in the App on the smartphone, and 3D printed with this device, controlled via Bluetooth. Several prototypes have been built and tested, and the project proved to be working.
Inspiracija: This project was born with the aim of making 3D Photosensitive resin printing affordable. Daylight resin for 3D printing allows most cellphones to be used as a light source to polymerize the resin. This allows us to give a second life to slightly outdated cellphones. I decided to design a very compact 3D printer that uses this technology, and to make the production process as lean as possible, the LumiBee can be bought as a kit or built by anyone with access to another home 3D printer.
Trajanje projekta: The project started in February 2019 and was exhibited in November at the Frankfurt Messe, during FormNext 2019 as part of the PurMundus exhibition.
Potek delovanja: The user downloads the CAD files of the parts that build up the LumiBee. With a desktop FFF 3D Printer, the parts are physically fabricated. Then the LumiBee is assembled. The user downloads the controlling App on a smartphone. Then, the 3D model that will be printed is opened in the app, and sliced in hundreds of horizontal sections, that are projected on the screen. The phone is inserted into the LumiBee, under a vat of liquid resin. The light of the screen solidifies the resin and creates the 3D part.
Patenti: The project is published with Open Source under GNU General Public License v3.0.
Člani ekipe: Marin Davide
Zasluge za slike: All images: Marin Davide photographer, 2019/2020