Carbon Activated Timber Bench Klop – avtor Michael Budig and Kenneth Tracy

Delo Carbon Activated Timber Bench Klop avtorja Michael Budig and Kenneth Tracy je izjemno cenjeni dobitnik prestižne nagrade 2020 Bronasta nagrada A' Design Award v tekmovalni kategoriji Trajnostni izdelki, projekti in zeleno oblikovanje.

BronastaTrajnostni izdelek· 2020

Carbon Activated Timber Bench Klop

avtor/ica: Michael Budig and Kenneth Tracy

Naročnik: Singapore University of Technology and Design

Dobitnik nagrade Bronasta nagrada A' Design Award v kategoriji Trajnostni izdelek

24,106

Potrjeni dobitnik nagrade

Preverite status nagrade za #89216

Ogled na A' Design Award Sporočilo za javnost Značka nagrade

Barve

Dizajn

O dizajnu Carbon Activated Timber Bench Klop

Lesena klop s karbonskimi vlakni je zasnovana za javne prostore in je izdelana iz obnovljenih lesenih desk. Izpodbija predstave o teži in stabilnosti. Medtem ko volumen lesenih desk deluje kot navidezno masivni bloki, so ti le ohlapno povezani in v nestabilnem stanju. Tanke niti karbonskih vlaken povezujejo masivne bloke in jim zagotavljajo stabilnost. Prav tako krepijo bloke in še dodatno povečujejo trdnost lesenih desk.

Priznanje

O nagradi Bronasta nagrada A' Design Award

Carbon Activated Timber Bench Klop je prejemnik Bronaste nagrade A' Design Award, zelo prestižnega priznanja, ki se podeljuje izjemnim oblikovanjem, ki se odlikujejo po ustvarjalnosti, iznajdljivosti in bistrosti. Prejemniki Bronaste nagrade so v celoti spretni in presenetljivo ustvarjalni artefakti, ki potrjujejo bogate izkušnje, domišljijo in zvitost svojih oblikovalcev. Od Carbon Activated Timber Bench Klop se pričakuje, da bo visoko cenjen, občudovan in ljubljen predmet, opazno profesionalen in inovativen. To oblikovanje, nagrajeno z Bronasto nagrado A' Design Award, vključuje najboljše prakse v umetnosti, znanosti, oblikovanju in tehnologiji ter je odlično po pozornosti do podrobnosti. Carbon Activated Timber Bench Klop sijajno zadovoljuje potrebe, se dotika želja, očara čustva in vzbuja radovednost.

V ozadju dizajna

Komplet za medije

Zasluge, člani ekipe in tehnične podrobnosti, ki jih je posredoval oblikovalec.

Edinstvene lastnosti: The bench uses reclaimed wood planks that through their re-application continue to store carbon, since the living trees absorb CO2 from the environment. The re-use of the wood hence contributes to a positive ecological balance. Carbon is re-combined with the wood in a different state, as minimal amounts of high tech fibres that are strategically placed to enhance the capacity of the wood planks.
Dimenzije in embalaža: Dimensions: 3000 x 830 x 400 mm
Volume: 0.1736 m3
Mass: 128 kg of reclaimed hardwood from outdoor deckings
Carbon fibers, total mass: 0.623 kg (around 800m of 12k carbon fibre tow)
Oznake: Reclaimed wood, carbon fibres, robotic milling, traditional crafts
Proizvodna tehnologija: The bench reflects craftsmanship in a contemporary context, where computational design and fabrication have become state of the art. After stacking reclaimed wood planks into solid blocks, an industrial robotic arm mills the blocks into their final geometries with paths for the subsequent reiforcement with fibres. The reclaimed wood planks store carbon and contribute to a positive ecological balance, whereas carbon is re-combined as minimal amounts of high tech fibres, strategically placed to enhance the capacity of the wood planks.
Oblikovalski izziv: Reclaimed wood simultaneously diverts waste and reduces the energy by forgoing the effort needed to obtain virgin materials. The finishing and fabrication contribute to making a durable, robust piece of furniture sequestering carbon for longer and reducing the need for replacements. Finally augmenting the performance of wood beyond its inherent structural capacity increases the potential range of use so it can be used differently for both industrial design and architecture.
Raziskave: The bench design highlights the expertise present in large-scale furniture carpentry in a combination of experienced labor with new forms of craft, digital calibration and robotic fabrication. By augmenting the reclaimed wood with carbon fibers, the project proves that small amounts of high-performance materials can be used alongside carbon-negative wood elements. This new design direction increases productivity and sustainability through the use of new design and manufacturing technologies.
Inspiracija: Juxtaposing old, weathered hardwood with precise smooth carving and high-tech carbon fiber gives the piece a unique character. This novel expression fuses high tech carving, patina, natural wood grain, digitally designed weaving patterns and precise manufacturing. This points towards an optimized, calibrated future of sustainable design and recalls vernacular traditions of textile and wood construction. Lashing, wood joinery and timber frames act as both cultural and technological precedents.
Trajanje projekta: Conversations started in late December 2016, and the design was completed in November 2018 and installed on the grounds of Mapletree Business City 2, Singapore
Potek delovanja: Initiated by the opportunity to reuse wood decking boards the project leverages high performance materials and new techniques to renew the old materials and create a sustaining piece of furniture. An elongated pattern of tightly wound carbon fiber strands rest within robotically carved groves to hold the massive stack of blocks together. Precise, continuous curvature combined with tapered edges form a comfortable low-profile object that looks lightweight despite being 140kg
Člani ekipe: Principal Designer: Michael Budig
Principal Designer: Kenneth Tracy
Sachin Gupta
Kerine Kua
Dhileep Kumar
Lee Le Xiu Jean
Melissa Lee Wen Hui
Seah Jia Neng
Daniel Yong Kaijie
Robotic Fabricator: Singapore Composite Cluster
Wood Fabricator: Hon Nam Lee
Zasluge za slike: Michael Budig and Kenneth Tracy, Singapore University of Technology and Design