Kalo te përmbajtja
Aspen Koka e trekëmbëshit nga Colorado Tripod Company

Dizajni Aspen Koka e trekëmbëshit nga Colorado Tripod Company është një fitues shumë i vlerësuar i çmimit prestigjioz 2021 Çmimi i Argjendtë A' Design Award në Kategorinë e Konkurrimit Dizajni i Kamerave dhe Pajisjeve Fotografike.


ArgjendiPajisje Fotografike· 2021

Aspen Koka e trekëmbëshit

nga Colorado Tripod Company

Klienti: Colorado Tripod Company

Fitues i Çmimi i Argjendtë A' Design Award në Kategorinë Pajisje Fotografike

39,753

Fitues i Verifikuar i Çmimit

Verifiko Statusin e Çmimit për #108315

Ngjyrat

Dizajni

Rreth Aspen Koka e trekëmbëshit

Aspen është një kokë trekëmbëshi e projektuar për të thjeshtuar kompozimin fotografik. Një kornizë e hapur lejon që një aparat fotografik i bashkangjitur të rrotullohet shumë përtej 90 gradëve në të dyja drejtimet, duke ofruar ndryshime të shpejta midis orientimit horizontal dhe vertikal pa mbajtëse L të rënda. Topi ka një bërthamë të zbrazët me vrima që zvogëlojnë peshën duke ruajtur qëndrueshmërinë. Një kapëse leve e rregullueshme mban një gamë të gjerë pllakash aparati, një kontroll fërkimi cakton rezistencën, dhe një bllokim panoramik lejon rrotullim të plotë për fotografi panoramike. Aspen është i punuar me makineri nga alumini i anoduar i fortë.

Njohja

Rreth Çmimi i Argjendtë A' Design Award

Aspen Koka e trekëmbëshit është fitues i Çmimit të Argjendtë A' Design Award, një njohje jashtëzakonisht prestigjioze që u akordohet dizajneve të nivelit më të lartë, mahnitëse dhe mbresëlënëse. Fituesit e Argjendtë janë vepra tejet brilante dhe jashtëzakonisht krijuese që ilustrojnë ekspertizën, talentin dhe mprehtësinë e shquar të dizajnerëve të tyre. Aspen Koka e trekëmbëshit pritet të jetë një vepër e mrekullueshme, vitrinë e vërtetë e mjeshtërisë, jashtëzakonisht profesionale dhe thellësisht inovative. Ky dizajn fitues i Çmimit të Argjendtë A' Design Award është një shpikje shumë e shquar dhe e admiruar që sjell dobi dhe zgjeron kufijtë e artit, shkencës, dizajnit dhe teknologjisë. Aspen Koka e trekëmbëshit është një krijim shumë i dëshiruar që ngjall dëshira, sjell ndjenja pozitive dhe zgjon habi e mahnitje.

Pas Dizajnit

Paketa për Shtyp

Kreditët, anëtarët e ekipit dhe detajet teknike të ofruara nga dizajneri.

Veçoritë Unike
The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
Dimensionet & Paketimi
Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
Etiketat
tripod head, ball head, camera support, tripod, photography accessory
Teknologjia e Prodhimit
The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
Sfida e Dizajnit
In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
Kërkimi
A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
Frymëzimi
The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
Kohëzgjatja e Projektit
The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
Rrjedha e Operimit
A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
Patentat
Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
Anëtarët e Ekipit
Colorado Tripod Company

Sponsorizuar

Eksploroni Përtej Designers.org

Zbuloni produkte, shërbime dhe mundësi nga partnerët tanë reklamues.

Dizajni i Mirë Meriton Njohje të Madhe

A' Design Award është një çmim ndërkombëtar, i vlerësuar nga juria, për dizajnin e mirë. Merrni pjesë në A' Design Award për të pasur mundësinë të fitoni njohje meritokratike, famë, prestigj dhe publicitet për punën tuaj. Nominoni punën tuaj për A' Design Award dhe garoni për çmimin e lakmuar A' Design Prize.

Nomino