Aspen Sirah Tripod ku Colorado Tripod Company

Karya Aspen Sirah Tripod ku Colorado Tripod Company nyaéta pamenang anu dihormat pisan tina 2021 A' Design Award Perak anu bergengsi dina Katégori Kompetisi Peralatan Fotografi.

PerakPeralatan Fotografi· 2021

Aspen Sirah Tripod

ku Colorado Tripod Company

Klién: Colorado Tripod Company

Pamenang A' Design Award Perak dina Katégori Peralatan Fotografi

39,753

Pamenang Panghargaan anu Diverifikasi

Verifikasi Status Panghargaan pikeun #108315

Buka Situs Tingali di A' Design Award Siaran Pers Lencana Panghargaan

Warna

Désain

Ngeunaan Aspen Sirah Tripod

Aspen mangrupa sirah tripod anu dirancang pikeun ngagampangkeun komposisi fotografi. Rangka anu muka ngamungkinkeun kamera anu dipasang muteran langkung ti 90 derajat dina dua arah, méré parobihan gancang antara oriéntasi lanskap sareng potrét tanpa kurung-L anu badag. Bal ieu boga inti anu kosong kalawan liang-liang anu ngurangan beurat bari tetep ngajaga kakuatan. Klem tuas anu bisa disaluyukeun nyekel rupa-rupa plat kamera, kontrol gésékan ngatur hambatan, sarta konci panning ngidinan puteran pinuh pikeun poto panorama. Aspen dijieun tina aluminium anodisasi teuas ngaliwatan mesin.

Pangakuan

Ngeunaan A' Design Award Perak

Aspen Sirah Tripod mangrupa juara A' Design Award Perak, pangakuan anu luar biasa bergengsi anu dipasihkeun ka desain kelas luhur, endah jeung matak kagum. Para juara Perak téh karya anu pohara cemerlang jeung pohara kréatif anu ngagambarkeun kaahlian, bakat jeung kapinteran para désainerna. Aspen Sirah Tripod diharepkeun jadi karya anu éndah, karya andalan anu pohara profésional jeung pohara inovatif. Desain juara A' Design Award Perak ieu mangrupa panemuan anu pohara kasohor jeung dikagumi anu mangpaat sarta ngamajukeun watesan seni, élmu, desain jeung téknologi. Aspen Sirah Tripod mangrupa kréasi anu pohara diirikeun anu ngahudang kahayang, ngabawa rasa positip, jeung ngahudangkeun rasa heran jeung kagum.

Di Balik Désain

Kit Pers

Krédit, anggota tim sareng detil téknis anu disayogikeun ku désainer.

Sipat Unik: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
Diménsi & Bungkusan: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
Tag: tripod head, ball head, camera support, tripod, photography accessory
Téknologi Produksi: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
Tantangan Desain: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
Panalungtikan: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
Inspirasi: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
Durasi Proyék: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
Alur Operasi: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
Patén: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
Anggota Tim: Colorado Tripod Company