Fortex Primär funktion: Arbetsstövel av Vincent Blais

Designen Fortex Primär funktion: Arbetsstövel av Vincent Blais är en högt ansedd vinnare av den mycket prestigefyllda 2026 A' Design Award i Silver i tävlingskategorin Skyddskläder och Personlig Skyddsutrustningsdesign.

SilverSkyddsutrustning· 2026

Fortex Primär funktion: Arbetsstövel

av Vincent Blais

Klient: Royer

Vinnare av A' Design Award i Silver i kategorin Skyddsutrustning

21,380

Verifierad prisvinnare

Verifiera prisstatus för #182037

Besök webbplats Visa hos A' Design Award Pressmeddelande Utmärkelsemärke

Färger

Designen

Om Fortex Primär funktion: Arbetsstövel

Boktext: Fortex är en vattentät skyddsstövel konstruerad för högriskindustrimiljöer som innefattar kemisk exponering, stötrisker och mekanisk belastning. Dess innovation är en kemisk saminjektionsprocess som förenar termoplastiska polyuretankomponenter med en injicerad polyuretanbas och bildar en enhetlig struktur utan lim. Integrerade element inkluderar ett metatarsalskydd, sidoskydd för ankeln och en förstärkt hälkappa. Designen ger motstånd mot vatten, kemikalier, kolväten, punktering och halka, samtidigt som den förblir lätt, ergonomisk och termiskt effektiv.

Erkännandet

Om A' Design Award i Silver

Fortex Primär funktion: Arbetsstövel är vinnare av A' Design Award i Silver, ett utomordentligt prestigefyllt erkännande som tilldelas förstklassiga, hänförande och imponerande designverk i toppskiktet. Silvervinnare är oerhört briljanta och utomordentligt kreativa verk som illustrerar sina formgivares enastående expertis, talang och skarpsinne. Fortex Primär funktion: Arbetsstövel förväntas vara ett underbart paradexempel som är anmärkningsvärt professionellt och djupt innovativt. Detta vinnande verk i A' Design Award i Silver är en mycket uppmärksammad, beundrad uppfinning som gagnar och flyttar fram gränserna för konst, vetenskap, design och teknik. Fortex Primär funktion: Arbetsstövel är en skapelse som avundas starkt, som väcker längtan, förmedlar positiva känslor och väcker förundran och häpnad.

Bakom designen

Presskit

Erkännanden, teammedlemmar och tekniska detaljer tillhandahållna av designern.

Unika egenskaper: Engineered to redefine industrial performance, this boot features a quad-density co-injection system fusing PU and TPU into one seamless chassis. Anatomically mapped zones deliver lightweight shock absorption and targeted protection at key impact areas. A rigid heel stabilizes the foot on uneven terrain, while specialized outsoles ensure grip in extreme conditions. Cement-free bonding forms a waterproof, monolithic structure built for lasting durability and safety.
Dimensioner & förpackning: Product Dimensions (1 boot, size 42): 310 mm x 120 mm x 400 mm (height)
Package: 510 mm x 355 mm x 140 mm
Taggar: Co-injected Footwear, TPU Reinforcement, Polyurethane Safety Boot, Cold Weather Protection, Ankle protection, Metatarsal Protection, Industrial Design, Injection Molding Innovation, Chemical Bonding, Work Boot
Produktionsteknik: This safety boot is engineered through co-injection molding, chemically bonding high-density TPU reinforcement with a lightweight PU core to form a seamless, monolithic structure free from adhesives and delamination. Developed for sub-zero climates, the TPU formulation maintains elasticity at -40°C, ensuring impact resistance without brittleness. Precision tooling guarantees exact reinforcement placement, delivering targeted protection, thermal stability, and durability without added bulk.
Designutmaning: The principal challenge was achieving reliable co-molding between TPU and a PU base, ensuring sufficient bonding strength in the metatarsal insert located within the boot’s primary flex zone. This required rethinking rotary-injection machine & tooling: a system allowing a pre-molded TPU insert to seat in an articulated receiver moving in frontal-transverse planes before mold closure and PU injection. Constraints included production feasibility, material behavior, wearer comfort and international safety standard requirements.
Forskning: This applied industrial research explored polymer chemistry and precision engineering to eliminate adhesion failure and cold embrittlement in safety footwear. Using iterative prototyping and destructive testing, high-density TPU was co-injected with a cellular PU core to form a monolithic structure. Hundreds of bonding and sub-zero wear tests led to a cement-free boot with permanent molecular fusion, zero delamination, and full CSA, ASTM, and EN/ISO compliance.
Inspiration: This project merges heritage craftsmanship with advanced material science, transforming traditional footwear into an integrated high-performance system with protection embedded in its structural DNA. Inspired by biological exoskeletons, it acts as both protective shell and load-bearing frame. Rib-cage inspired arch geometry in the metatarsal zone disperses impact while preserving flexibility, creating a biomimetic system balancing safety and ergonomic performance.
Projektlängd: Designing started in Sherbrooke, Quebec, Canada in Dec. 2023. Engineering started in Legnaro, Padova, Italy in September 2024 with GGS, an elite Italian mold-making partner lead by M. Roberto Gobbato.
Arbetsflöde: This safety boot functions as a flexible exoskeleton, flexing at the forefoot while stabilizing the heel. TPU reinforcements shield the metatarsal area and ankle from impact without limiting movement. Unlike cemented footwear, its PU and TPU components are co-injected and chemically fused into a single monolithic structure, eliminating delamination. Built for harsh industrial and cold environments, it delivers long-term durability, reliability, and consistent performance.
Patent: Protective Toecap & Puncture-resistant Sole
(CSA Z195-14) Certified grade 1 protective toecap that withstands impacts up to 125 joules and certified puncture-resistant sole that withstands at least 1200 Newtons (270pounds)

Electric-shock Protection
(CSA Z195-14) Certified electric-shock protection (18 kV / 60 Hz / 1 minute)

Metatarsal Protection
(CSA Z195-14) Certified metatarsal protection that can withstand impacts up to 101.7 joules

Protective Toecap Impact and Compression Resistance
(ASTM F2413-24) Certified protective toecap that can withstand an impact of 75 ft-lbf (~100 Nm) and a compression of 2500lbs (~1135KG).

Puncture-resistant Sole
(ASTM F2413-24) Certified puncture-resistant sole that can withstand a force load of 270 lbf (1200 N)

Metatarsal Protection
(ASTM F2413-24) Certified metatarsal protection that can withstand an impact of 75 ft-lbf (~100 Nm)

Electric Hazard Protection
(ASTM F2413-24) Certified electric-shock protection (18 kV/ 60 Hz / 1 minute)

Slip Resistant Sole
(ASTM F2413-24) Certified slip-resistant footwear with a coefficient of friction (CoF) of no less than 0.40 on dry and wet quarry tile
Teammedlemmar: Footwear Developer/Designer: Vincent Blais
Design Associate: Loïc Girard
Executive Director - Innovation: Francis Lacroix

DEVELOPING PARTNERS:
Equipment and Testing: Felice Scarnera & Benedetto Scarnera from SFB Srl (Italy)
Master Moldmaker: Roberto Gobbato – GGS (Italy)
Material and Chemistry: ELACHEM (Italy)
Int'l team coordinator: Alexandra Dombrovska (Italy)