Fortex Функсияи асосӣ: Мӯзаи корӣ аз Vincent Blais

Тарҳи Fortex Функсияи асосӣ: Мӯзаи корӣ аз Vincent Blais ғолиби шоистаи ҷоизаи бонуфузи 2026 Ҷоизаи нуқрагии A' Design Award дар категорияи мусобиқавии Дизайни пӯшоки бехатарӣ ва таҷҳизоти ҳифзи шахсӣ мебошад.

НуқраТаҷҳизоти ҳифзӣ· 2026

Fortex Функсияи асосӣ: Мӯзаи корӣ

аз ҷониби Vincent Blais

Муштарӣ: Royer

Ғолиби Ҷоизаи нуқрагии A' Design Award дар категорияи Таҷҳизоти ҳифзӣ

21,380

Ғолиби тасдиқшудаи ҷоиза

Тасдиқи вазъи ҷоиза барои #182037

Ба сайт гузаред Дар A' Design Award дидан Релизи матбуотӣ Нишони ҷоиза

Рангҳо

Тарҳ

Дар бораи Fortex Функсияи асосӣ: Мӯзаи корӣ

Матни китоб: Fortex мӯзаи бехатарии зидди об аст, ки барои муҳитҳои саноатии хатари баланд бо таъсири кимиёвӣ, хатарҳои зарба ва фишори механикӣ таҳия шудааст. Навоварии он раванди ҳамқолабгирии кимиёвӣ мебошад, ки ҷузъҳои полиуретани термопластикиро ба асоси полиуретани сӯзандашуда пайваст карда, сохтори ягонаро бидуни часпакҳо ташкил медиҳад. Унсурҳои муттаҳидшуда муҳофизи метатарсал, ҳимояи паҳлӯии тӯпикро ва такягоҳи мустаҳкамшудаи пошнаро дар бар мегиранд. Тарҳ ба об, моддаҳои кимиёвӣ, карбогидридҳо, сӯрохшавӣ ва лағжиш муқовимат нишон медиҳад, дар айни ҳол сабук, эргономикӣ ва аз ҷиҳати гармӣ муассир мемонад.

Эътироф

Дар бораи Ҷоизаи нуқрагии A' Design Award

Fortex Функсияи асосӣ: Мӯзаи корӣ ғолиби Ҷоизаи нуқрагии A' Design Award аст, ки эътирофи фавқулодда обрӯманд буда, ба тарҳҳои сатҳи олӣ, зебо ва таъсирбахш дода мешавад. Ғолибони нуқра асарҳои бағоят дурахшон ва бениҳоят эҷодкоронаанд, ки таҷрибаи барҷаста, истеъдод ва зиракии тарроҳони худро нишон медиҳанд. Интизор меравад, ки Fortex Функсияи асосӣ: Мӯзаи корӣ асари аҷоиб ва намунавӣ бошад, ки ба таври назаррас касбӣ ва амиқан навоваронаанд. Ин тарҳи ғолиби Ҷоизаи нуқрагии A' Design Award ихтирои хеле назаррас ва мавриди таҳсин аст, ки судманд аст ва ҳудуди санъат, илм, тарроҳӣ ва технологияро пеш мебарад. Fortex Функсияи асосӣ: Мӯзаи корӣ офаридаест, ки бисёриҳо ба он ҳасад мебаранд ва хостаҳоро бедор мекунад, эҳсосоти мусбат меорад ва ҳайрат ва тааҷҷуб ба вуҷуд меорад.

Дар паси тарҳ

Маҷмӯаи матбуотӣ

Кредитҳо, аъзои гурӯҳ ва тафсилоти техникие, ки тарроҳ пешниҳод кардааст.

Хусусиятҳои беназир: Engineered to redefine industrial performance, this boot features a quad-density co-injection system fusing PU and TPU into one seamless chassis. Anatomically mapped zones deliver lightweight shock absorption and targeted protection at key impact areas. A rigid heel stabilizes the foot on uneven terrain, while specialized outsoles ensure grip in extreme conditions. Cement-free bonding forms a waterproof, monolithic structure built for lasting durability and safety.
Андоза ва бастабандӣ: Product Dimensions (1 boot, size 42): 310 mm x 120 mm x 400 mm (height)
Package: 510 mm x 355 mm x 140 mm
Тегҳо: Co-injected Footwear, TPU Reinforcement, Polyurethane Safety Boot, Cold Weather Protection, Ankle protection, Metatarsal Protection, Industrial Design, Injection Molding Innovation, Chemical Bonding, Work Boot
Технологияи истеҳсол: This safety boot is engineered through co-injection molding, chemically bonding high-density TPU reinforcement with a lightweight PU core to form a seamless, monolithic structure free from adhesives and delamination. Developed for sub-zero climates, the TPU formulation maintains elasticity at -40°C, ensuring impact resistance without brittleness. Precision tooling guarantees exact reinforcement placement, delivering targeted protection, thermal stability, and durability without added bulk.
Мушкилоти дизайн: The principal challenge was achieving reliable co-molding between TPU and a PU base, ensuring sufficient bonding strength in the metatarsal insert located within the boot’s primary flex zone. This required rethinking rotary-injection machine & tooling: a system allowing a pre-molded TPU insert to seat in an articulated receiver moving in frontal-transverse planes before mold closure and PU injection. Constraints included production feasibility, material behavior, wearer comfort and international safety standard requirements.
Таҳқиқот: This applied industrial research explored polymer chemistry and precision engineering to eliminate adhesion failure and cold embrittlement in safety footwear. Using iterative prototyping and destructive testing, high-density TPU was co-injected with a cellular PU core to form a monolithic structure. Hundreds of bonding and sub-zero wear tests led to a cement-free boot with permanent molecular fusion, zero delamination, and full CSA, ASTM, and EN/ISO compliance.
Илҳом: This project merges heritage craftsmanship with advanced material science, transforming traditional footwear into an integrated high-performance system with protection embedded in its structural DNA. Inspired by biological exoskeletons, it acts as both protective shell and load-bearing frame. Rib-cage inspired arch geometry in the metatarsal zone disperses impact while preserving flexibility, creating a biomimetic system balancing safety and ergonomic performance.
Давомнокии лоиҳа: Designing started in Sherbrooke, Quebec, Canada in Dec. 2023. Engineering started in Legnaro, Padova, Italy in September 2024 with GGS, an elite Italian mold-making partner lead by M. Roberto Gobbato.
Ҷараёни кор: This safety boot functions as a flexible exoskeleton, flexing at the forefoot while stabilizing the heel. TPU reinforcements shield the metatarsal area and ankle from impact without limiting movement. Unlike cemented footwear, its PU and TPU components are co-injected and chemically fused into a single monolithic structure, eliminating delamination. Built for harsh industrial and cold environments, it delivers long-term durability, reliability, and consistent performance.
Патентҳо: Protective Toecap & Puncture-resistant Sole
(CSA Z195-14) Certified grade 1 protective toecap that withstands impacts up to 125 joules and certified puncture-resistant sole that withstands at least 1200 Newtons (270pounds)

Electric-shock Protection
(CSA Z195-14) Certified electric-shock protection (18 kV / 60 Hz / 1 minute)

Metatarsal Protection
(CSA Z195-14) Certified metatarsal protection that can withstand impacts up to 101.7 joules

Protective Toecap Impact and Compression Resistance
(ASTM F2413-24) Certified protective toecap that can withstand an impact of 75 ft-lbf (~100 Nm) and a compression of 2500lbs (~1135KG).

Puncture-resistant Sole
(ASTM F2413-24) Certified puncture-resistant sole that can withstand a force load of 270 lbf (1200 N)

Metatarsal Protection
(ASTM F2413-24) Certified metatarsal protection that can withstand an impact of 75 ft-lbf (~100 Nm)

Electric Hazard Protection
(ASTM F2413-24) Certified electric-shock protection (18 kV/ 60 Hz / 1 minute)

Slip Resistant Sole
(ASTM F2413-24) Certified slip-resistant footwear with a coefficient of friction (CoF) of no less than 0.40 on dry and wet quarry tile
Аъзои гурӯҳ: Footwear Developer/Designer: Vincent Blais
Design Associate: Loïc Girard
Executive Director - Innovation: Francis Lacroix

DEVELOPING PARTNERS:
Equipment and Testing: Felice Scarnera & Benedetto Scarnera from SFB Srl (Italy)
Master Moldmaker: Roberto Gobbato – GGS (Italy)
Material and Chemistry: ELACHEM (Italy)
Int'l team coordinator: Alexandra Dombrovska (Italy)