ዲዛይን Thermacut ናይ ፕላዝማ ቶርች ብ David Polasek ኣብ ናይ ውድድር ምድብ ንድፊ ሃርድዌር፣ ናውቲ ሓይልን ናውቲ ኢድን ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2021 ናይ ነሓስ ሽልማት A' Design Award እዩ።

ነሓስሃርድዌር· 2021

Thermacut ናይ ፕላዝማ ቶርች

ብ David Polasek

ዓሚል: Novo Design

ኣብ ምድብ ሃርድዌር ተሸላማይ ናይ ነሓስ ሽልማት A' Design Award

48,158

ዝተረጋገጸ ተሸላማይ

ንቁጽሪ #106220 ሽልማት ኣረጋግጽ

ሳይት ብጻሕ ኣብ A' Design Award ርአዮ ጋዜጣዊ መግለጺ ባጅ ሽልማት

ሕብርታት

እቲ ዲዛይን

ብዛዕባ Thermacut ናይ ፕላዝማ ቶርች

ተርማካት ንምቁራጽ ማዕድን ዝተዳለወ ናይ ፕላዝማ ቶርች እዩ። እዚ ቶርች ኣካል ናይ ፕላዝማ ምቁራጽ ስርዓት ኮይኑ፣ ጋዝን ኤለክትሪክን ተጠቒሙ ናይ 20000 ዲግሪ ሴልስየስ ሃልሃልታ ይፈጥር፣ ብዚ ድማ ክሳብ 40 ሚሊሜተር ውፍረት ዘለዎ ብረት ይቆርጽ። ዕርጎ ናይቲ መያዝያ ብዙሓት ኣገባባት ናይ ምሓዝ ኣገባብ ይፍቅድ። እቲ ቶርች ብዕፅፍቲ መዳፍ ኣብ ልዕሊ መያዝያ ብምዕጻፍ ወይ ድማ ዓባይ ዓንዲ ኢድ ኣብ ላዕሊ መያዝያ ብምንባር ክተሓዝ ይክእል። ናይ ድሕነት ቀስቀሲ ድማ ናይ ዘይተደለየ ኣሰራርሓ ይኽልኽል። እቲ ቀንዲ ጎማ ብፕላስቲክ ብኢንጀክሽን ሞልዲንግ ተሰርሐ፣ ካልኦት ኣካላት ድማ ብኮፐር፣ ብራስ፣ ብረት፣ ሴራሚክን ላስቲክን ተሰርሑ።

እቲ ኣፍልጦ

ብዛዕባ ናይ ነሓስ ሽልማት A' Design Award

Thermacut ናይ ፕላዝማ ቶርች ናይ ነሓስ ሽልማት A' Design Award ዝዓወተ እዩ፣ ብፈጠራ፣ ርእሰ ሓይልን ስቕታን ዝፍለዩ ብልጫ ዘለዎም ዲዛይናት ዝወሃብ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ነሓስ ሰፊሕ ተሞክሮ፣ ምሕሳብን ርእሰ ምምዕባልን ዲዛይነራቶም ዘረጋግጹ ኣዚዮም ክኢላታትን ብዘደንቕ መገዲ ፈጠራውያንን ኣርቴፋክትታት እዮም። Thermacut ናይ ፕላዝማ ቶርች ብዙሕ ዝተመነየ፣ ዝደነቐን ዝፈተዎን ብኣገዳሲ መገዲ ሞያውን ሓድሽን ኣቕሓ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ነሓስ ሽልማት A' Design Award ኣብ ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ዝበለጹ ልምድታት ዘጣምር፣ ንዝርዝር ብዝህቦ ኣቓልቦ ድማ ዝበለጸ እዩ። Thermacut ናይ ፕላዝማ ቶርች ድልየታት ብጽባቐ የማልእ፣ ንድሌታት ይትንክፍ፣ ንስምዒታት የማርኽን ሕቶ ድማ የሰሕብን።

ድሕሪ እቲ ዲዛይን

ናይ ፕረስ ኪት

ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።

ፍሉያት ባህርያት: Thermacut plasma torch brings new design of handle for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000 celsius degree to cut metal materials up to 40mm thick. The handle includes safety trigger and offers multiple ways of holding for plasma operators. You can hold device with closed palm around handle or with the thumb on the top of the handle.
ዓቐንን ማዕሸግን: Width 256mm x Depth 39mm x Height 148mm
መለለዪታት: Thermacut, Extrafire, Plasma, Torch, Cutting, Metal, Handle, Ergonomics
ናይ ምፍራይ ቴክኖሎጂ: Plasma torch consists from metal technology parts which are made of copper, grass and steel. Main case is made of plastic using injection molding technology for mass production. Another parts are made of ceramic, rubber, etc.
ናይ ዲዛይን ብድሆ: The bigger challenge of whole development process was the fusion of design styling and technology inside that device. We tried to find optimal solution how to connect well looking product with perfect ergonomic feature and production quality. Another challenge was fitting all technology parts into tight plastic case.
ምርምር: The plasma torch Thermacut is product by worldwide producer of plasma cutting systems for manufacturing industry with more than 25 years experience in this industry. Thermacut Extrafire brings new design of handle construction for comfortable cutting the metals by plasma arc technology. This ergonomic handle is one part of complex plasma cutting system powered by aggregate which uses gas and electricity to create high temperature flame 20.000°C. Plastic handle is a shell for plasma cutting torch assembly that carries plasma consumables. Handle with torch body is connected with plasma power supply that delivers current for torch operation. This torch and handle is designed for air cutting applications and works up to 105Amp cutting steel materials up to 40mm thick. Ergonomic handle offers multiple ways of holding for plasma operators. The operator can hold torch ordinarily with closed palm around handle or with the thumb on the top of the handle using special thumb rest spot as support for better leading the torch during cutting process. The handle includes safety trigger to turn the torch on only when operator wants and can not cause injury of operator.
ምንጪ ሓሳብ: New product design comes from previous series partly and brings new attitude of dynamic ergonomic construction. Body shape with new proportion is more comfortable to hold and opperate during work process. The handle offers more options how to hold device in hand due to organic form and rigorously defined grip fields.
ናይ ፕሮጀክት ግዜ: The project development of technology and design started in December 2015 in Zlin district in Czech Republic and finished in May 2020 in Czech Republic.
ናይ ስርሒት ፍሰት: Plasma torch uses high temperature flame to cut steel and another metal materials up to 40mm thick. Due to ergonomic handle it is easy and comfy to operate this device safely and correctly. 20.000 celsius degree flame comes into being via ionization of gas nad electricity. Plasma cutting is used in industry mainly, but is available for home improvements and work as well.
ፓተንታት: Copyright 2020, David Polasek - Novo Design & Thermacut k.s. company, Czech Republic.
ኣባላት ጋንታ: R&D Engineer: Zdeněk Lapčík, R&D Engineer: Tomáš Kusák
ናይ ስእሊ ክረዲት: Image 1: Creator (designer) David Polasek, Image 2: Creator (designer) David Polasek, Image 3: Creator (designer) David Polasek, Image 4: Creator (designer) David Polasek, Image 5: Creator (designer) David Polasek