Aspen ናይ ትሪፖድ ርእሲ ብ Colorado Tripod Company

ዲዛይን Aspen ናይ ትሪፖድ ርእሲ ብ Colorado Tripod Company ኣብ ናይ ውድድር ምድብ ንድፊ ካሜራን ኣቕሑ ፎቶግራፊን ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2021 ናይ ብሩር ሽልማት A' Design Award እዩ።

ብሩርኣቕሑ ፎቶግራፊ· 2021

Aspen ናይ ትሪፖድ ርእሲ

ብ Colorado Tripod Company

ዓሚል: Colorado Tripod Company

ኣብ ምድብ ኣቕሑ ፎቶግራፊ ተሸላማይ ናይ ብሩር ሽልማት A' Design Award

39,753

ዝተረጋገጸ ተሸላማይ

ንቁጽሪ #108315 ሽልማት ኣረጋግጽ

ሳይት ብጻሕ ኣብ A' Design Award ርአዮ ጋዜጣዊ መግለጺ ባጅ ሽልማት

ሕብርታት

እቲ ዲዛይን

ብዛዕባ Aspen ናይ ትሪፖድ ርእሲ

ኣስፐን (Aspen) ንፎቶግራፊያዊ ኣቀማምጣ ንምቅላል ዝተነድፈ ናይ ትሪፖድ ርእሲ እዩ። ክፉት ፍሬም ዝተጠቕዐ ካሜራ ኣብ ክልቲኡ ኣንፈታት ካብ 90 ዲግሪ ንላዕሊ ክዞር የፍቅድ፣ ብዘይ ዓበይቲ L-ብራኬታት ኣብ መንጎ ኣቀማምጣ ገጽ-ምድሪ (landscape) ከምኡውን ኣቀማምጣ ቁመት (portrait) ቅልጡፍ ለውጢ ይህብ። እቲ ኳስ ክብደት እናቐነሰ ጽንዓት እናዓቀበ ዝኸይድ ብ ጉድጓዳት ዝተነድፈ ጎዶሎ ማእከል ኣለዎ። ክተዓራረ ዝኽእል ናይ ሌቨር መጭበጢ ንዝተፈላለዩ ናይ ካሜራ ሰሌዳታት ይሕዝ፣ ናይ ፍሪክሽን ቁጽጽር ነቲ ጎትን (drag) የቐምጥ፣ ናይ ፓኒንግ መዕጸዊ ድማ ንፓኖራሚክ ፎቶግራፍ ምሉእ ዙረት የፍቅድ። ኣስፐን ካብ ብትሪ ኣኖዳይዝድ ዝተገብረ ኣልሙኒየም ብማሽን ዝተሰርሐ እዩ።

እቲ ኣፍልጦ

ብዛዕባ ናይ ብሩር ሽልማት A' Design Award

Aspen ናይ ትሪፖድ ርእሲ ናይ ብሩር ሽልማት A' Design Award ዝዓወተ እዩ፣ ንጽቡቓት፣ ልዑላትን ዘስደምምን ላዕለዋይ ደረጃ ዘለዎም ዲዛይናት ዝወሃብ ብዘይተለምደ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ብሩር ፍሉይ ክእለት፣ ተውህቦን ጥበብን ዲዛይነራቶም ዘርእዩ ኣዚዮም ዘብርሁን ብዙሕ ፈጠራውያንን ስራሕቲ እዮም። Aspen ናይ ትሪፖድ ርእሲ ዝበለጸ፣ ምሳሌ ዝኾነ፣ ብኣገዳሲ መገዲ ሞያውን ብዕምቆት ሓድሽን ስራሕ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ብሩር ሽልማት A' Design Award ብዙሕ ዝተራእየን ዝደነቐን ፈጠራ እዩ፣ ጥቕሚ ዘምጽእን ደረት ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ዘስፍሕን። Aspen ናይ ትሪፖድ ርእሲ ብብዙሕ ዝቐንኣሉ ፍጥረት እዩ፣ ድሌታት ዘበራብር፣ ጽቡቕ ስምዒታት ዘምጽእን ሰንቢድን ምድናቕን ዘበራብርን።

ድሕሪ እቲ ዲዛይን

ናይ ፕረስ ኪት

ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።

ፍሉያት ባህርያት: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
ዓቐንን ማዕሸግን: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
መለለዪታት: tripod head, ball head, camera support, tripod, photography accessory
ናይ ምፍራይ ቴክኖሎጂ: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
ናይ ዲዛይን ብድሆ: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
ምርምር: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
ምንጪ ሓሳብ: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
ናይ ፕሮጀክት ግዜ: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
ናይ ስርሒት ፍሰት: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
ፓተንታት: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
ኣባላት ጋንታ: Colorado Tripod Company