Morita Wds 2023 ናይ ምርኢት ዳስ ብ Shotaro Inahara

ዲዛይን Morita Wds 2023 ናይ ምርኢት ዳስ ብ Shotaro Inahara ኣብ ናይ ውድድር ምድብ ንድፊ ኣርክቴክቸር ናይ ንግዲ ምርኢት፣ ውሽጣውን ኤግዚቢትን ኣዝዩ ዝኸበረ ተሸላማይ ናይ 2025 ናይ ብሩር ሽልማት A' Design Award እዩ።

ብሩርናይ ንግዲ ምርኢት· 2025

Morita Wds 2023 ናይ ምርኢት ዳስ

ብ Shotaro Inahara

ዓሚል: HAKUTEN Corporation

ኣብ ምድብ ናይ ንግዲ ምርኢት ተሸላማይ ናይ ብሩር ሽልማት A' Design Award

20,489

ዝተረጋገጸ ተሸላማይ

ንቁጽሪ #162228 ሽልማት ኣረጋግጽ

ሳይት ብጻሕ ኣብ A' Design Award ርአዮ ጋዜጣዊ መግለጺ ባጅ ሽልማት

ሕብርታት

እቲ ዲዛይን

ብዛዕባ Morita Wds 2023 ናይ ምርኢት ዳስ

ሞሪታ ደብሊው ዲ ኤስ 2023 ንኣፍራዪ ናውቲ ስኒ ሕክምና እተፈጥረ ናይ ምርኢት ዳስ እዩ። እቲ ዳስ 32000 ብ 15000 ብ 4500 ሚሊሜተር ዝዓቐኑ እዩ። እቲ ንድፊ ካብ ንፍርያት ጥራይ ንላዕሊ ድሕረ-ባይታ ናይቶም ፍርያት የቕርብ። ክፋላት ተፈናቲሖም ይርኣዩ፣ ውሽጣዊ መካኒዝማት ብግሉጽ መሳዅቲ ይርኣዩ፣ ከምኡውን ዕላማ ንድፊ ንምግላጽ ዓቐናት ብግልጺ ይቐርቡ። መንደቓት ካብ ድሕሪ ምቝራጽ ብሞልድ ዝተረፈ ተረፍ ሉሕ ሓጺን እተሰርሑ እዮም። እቲ ቅርጺ ብዘይ መጣበቒ ብብሎናት ተጠሚሩ እዩ፣ ስለዚ እቶም ንዋታት ደጊሞም ክምስርሑ ይኽእሉ።

እቲ ኣፍልጦ

ብዛዕባ ናይ ብሩር ሽልማት A' Design Award

Morita Wds 2023 ናይ ምርኢት ዳስ ናይ ብሩር ሽልማት A' Design Award ዝዓወተ እዩ፣ ንጽቡቓት፣ ልዑላትን ዘስደምምን ላዕለዋይ ደረጃ ዘለዎም ዲዛይናት ዝወሃብ ብዘይተለምደ ኣዚዩ ክቡር ኣፍልጦ። ዘዓወቱ ብሩር ፍሉይ ክእለት፣ ተውህቦን ጥበብን ዲዛይነራቶም ዘርእዩ ኣዚዮም ዘብርሁን ብዙሕ ፈጠራውያንን ስራሕቲ እዮም። Morita Wds 2023 ናይ ምርኢት ዳስ ዝበለጸ፣ ምሳሌ ዝኾነ፣ ብኣገዳሲ መገዲ ሞያውን ብዕምቆት ሓድሽን ስራሕ ክኾን ይጽበ። እዚ ዝዓወተ ዲዛይን ናይ ብሩር ሽልማት A' Design Award ብዙሕ ዝተራእየን ዝደነቐን ፈጠራ እዩ፣ ጥቕሚ ዘምጽእን ደረት ጥበብ፣ ሳይንስ፣ ዲዛይንን ቴክኖሎጂን ዘስፍሕን። Morita Wds 2023 ናይ ምርኢት ዳስ ብብዙሕ ዝቐንኣሉ ፍጥረት እዩ፣ ድሌታት ዘበራብር፣ ጽቡቕ ስምዒታት ዘምጽእን ሰንቢድን ምድናቕን ዘበራብርን።

ድሕሪ እቲ ዲዛይን

ናይ ፕረስ ኪት

ክረዲትታት፣ ኣባላት ጋንታን ቴክኒካዊ ዝርዝራትን ብዲዛይነር ዝቐረቡ።

ፍሉያት ባህርያት: Began with a deep understanding of Morita by reading the technical history that describes how the products were made. The exhibition also included a tour of the manufacturing process and interviews about the company's commitment to its products. The exhibition also included a fascinating behind-the-scenes look at the products, including an introduction to the development story, a transparent and disassembled mechanism display, and an appeal to the design intent by exposing the dimensions.
ዓቐንን ማዕሸግን: The overall dimensions of the booth are W32000 x D15000 x H4500 mm.
መለለዪታት: Exhibition,Booth,Sustainability,Branding,Luminous Signs,Dental,Equipment
ናይ ምፍራይ ቴክኖሎጂ: The “MORITA MUSEUM” sign. The sign is side-illuminated, and one side is embedded in the wall to suggest that this is a booth that attracts visitors to Morita from a different angle.
The base design of the graphics is based on drawings, which gives visitors a sense of the product manufacturing process.
The wrighting of the corner signs is not based on product names, but on words that are beneficial to visitors, in order to induce their interest in the contents of the corner.
ናይ ዲዛይን ብድሆ: Based on the above, the booth will be a “fascinating display of the invisible” by (1) disassembling the product part by part, (2) introducing the development process and its secret story, (3) showing the internal mechanism through a transparent window, and (4) showing the design attention to detail through the dimensions of the product.
ምርምር: We also visited Morita Manufacturing Corporation, where the products are actually manufactured, to observe the manufacturing process and hear about the developer's commitment to the products.
ምንጪ ሓሳብ: Morita also exhibited at the annual regional dental shows. There, the company exhibits directly related to sales promotion, focusing on products and services, and it was a place to sell products. This year's WDS will focus not only on products, but also on their backgrounds. Who and what kind of thoughts and processes go into the making of a product. The experience was designed as a branding opportunity for people to learn more about Morita and become fans.
ናይ ፕሮጀክት ግዜ: The project started in September 29, 2023 and finished in October 1, 2023 in Yokohama.
ናይ ስርሒት ፍሰት: On the wall, we used a scrap piece of sheet metal from which parts had been die-cut.The design matched the concept of this exhibition as a material reminiscent of the manufacturing process, and the design also functioned as an eye-catcher, attracting visitors' interest by allowing them to see inside the booth through the hole in the wall.
The booth was fixed with screws, without using any adhesives, so that it could be returned to the factory and returned to the normal recycling flow.
ኣባላት ጋንታ: Designer : Shotaro Inahara
Art Director : Akiyuki Maruyama
Producer : Tatsuya Sato
Producer : Riku Nishihara
Product Manager : Toshiki Takei
ናይ ስእሊ ክረዲት: Image #No1~5 : Photographer, Akira Arai.