Chris Dopp & Travis Baldwin tarapyndan Vista EY2T Esasy Funksiýasy: Motorly Biometrik Identifikasiýa Kamerasy

Chris Dopp & Travis Baldwin tarapyndan döredilen Vista EY2T Esasy Funksiýasy: Motorly Biometrik Identifikasiýa Kamerasy dizaýny Howpsuzlyk, Goraglylyk we Gözegçilik Önümleri Dizaýny Bäsleşik Kategoriýasynda 2015 A' Design Award Kümüş Baýragy baýragynyň abraýly ýeňijisidir.

KümüşHowpsuzlyk Önümleri· 2015

Vista EY2T Esasy Funksiýasy: Motorly Biometrik Identifikasiýa Kamerasy

dizaýner: Chris Dopp & Travis Baldwin

Müşderi: Vista Imaging and Crea Inc Design LTD

Howpsuzlyk Önümleri Kategoriýasynda A' Design Award Kümüş Baýragy Ýeňijisi

25,961

Tassyklanan Baýrak Ýeňijisi

#40052 üçin Baýrak Ýagdaýyny Barlaň

Sahypa giriň A' Design Award-da görüň Metbugat beýannamasy Baýrak nyşany

Reňkler

Dizaýn

Vista EY2T Esasy Funksiýasy: Motorly Biometrik Identifikasiýa Kamerasy hakynda

Kitap Teksti: Vista EY2T — gyýma we ýüz tanamak üçin niýetlenen motorly biometrik identifikasiýa kamerasydyr. Enjam görüş meýdanyny ýüzleri anyklamak üçin skanirleýär, soňra motorlar kamerany gözlere gönükdirmek üçin aýlaýar. Infragyzyl LED-leriň giň ýaýrawy we awtofokus ulgamy 3-den 6 fута çenli aralykda surata düşürmäge mümkinçilik berýär, şonuň üçin el bilen nyşana almak zerurlygy ýok. Dokuz öňki datçik ýeke-täk gara ýüzüň aňyrsynda birleşdirilendir, silindr şekilli, tegelek uçly görnüşi bolsa asuda we howp salmaýan keşp döredýär. Kamera aýratynlykda ýa-da diwar gurnamasy bilen ulanylyp bilner.

Ykrar etme

A' Design Award Kümüş Baýragy hakynda

Vista EY2T Esasy Funksiýasy: Motorly Biometrik Identifikasiýa Kamerasy A' Design Award Kümüş Baýragynyň ýeňijisidir; bu owadan, belent we täsirli ýokary derejeli dizaýnlara berilýän adatdan daşary abraýly ykrarnamadyr. Kümüş ýeňijileri dizaýnerleriniň ajaýyp bilimini, zehinini we ýiti aňyny görkezýän aşa ýalpyldawuk we örän döredijilikli eserlerdir. Vista EY2T Esasy Funksiýasy: Motorly Biometrik Identifikasiýa Kamerasy ajaýyp, nusgalyk, üns çekiji derejede hünärmenlikli we çuňňur täzelikçi eser bolmagy garaşylýar. A' Design Award Kümüş Baýragyny gazanan bu dizaýn sungatyň, ylmyň, dizaýnyň we tehnologiýanyň çäklerine peýda berýän we ony öňe sürýän örän üns çekiji, haýran galynýan oýlap tapyşdyr. Vista EY2T Esasy Funksiýasy: Motorly Biometrik Identifikasiýa Kamerasy köpüň gabanjyna sezewar bolýan, isleglerimizi oýarýan, oňyn duýgulary getirýän we haýranlyk we geň galmagy döredýän eserdir.

Dizaýnyň sahna arkasy

Metbugat toplumy

Dizaýner tarapyndan berlen kreditler, topar agzalary we tehniki maglumatlar.

Üýtgeşik Aýratynlyklar: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Ölçegler we Gaplama: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Bellikler: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Önümçilik Tehnologiýasy: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Dizaýn Kynçylygy: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Gözleg: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Ylham: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Taslama Dowamlylygy: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Iş Akymy: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Topar Agzalary: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Surat Awtorlary: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015