Vista EY2T Motorized na Biometric Identification Camera ni Chris Dopp & Travis Baldwin

Ang disenyo na Vista EY2T Motorized na Biometric Identification Camera ni Chris Dopp & Travis Baldwin ay isang lubhang iginagalang na nagwagi ng napaka-prestihiyosong 2015 A' Design Award na Pilak sa Kategoryang Paligsahan na Disenyo ng Produktong Panseguridad, Pangkaligtasan at Pangmamanman.

PilakProduktong Panseguridad· 2015

Vista EY2T Motorized na Biometric Identification Camera

ni Chris Dopp & Travis Baldwin

Kliyente: Vista Imaging and Crea Inc Design LTD

Nagwagi ng A' Design Award na Pilak sa Kategoryang Produktong Panseguridad

25,961

Na-verify na Nagwagi ng Parangal

I-verify ang Katayuan ng Parangal para sa #40052

Bisitahin ang Site Tingnan sa A' Design Award Press Release Badge ng Parangal

Mga Kulay

Ang Disenyo

Tungkol sa Vista EY2T Motorized na Biometric Identification Camera

Ang Vista EY2T ay isang motorized na biometric identification camera para sa iris at facial recognition. Sinisiyasat ng device ang saklaw ng paningin upang makakita ng mga mukha, pagkatapos ay iikot ng mga motor ang camera upang itutok ito sa mga mata. Ang malawak na pagkalat ng infrared LEDs at isang autofocus system ay nagbibigay-daan sa pagkuha ng larawan sa distansyang 3 hanggang 6 na talampakan, kaya hindi na kailangan ang manual na pagtutok. Siyam na front sensor ang pinagsama-sama sa likod ng iisang itim na mukha, at ang hugis-silindro na parang pildoras na may bilog na mga dulo ay lumilikha ng kalmado at hindi nakakatakot na anyo. Maaaring gamitin ang camera nang mag-isa o kasama ng wall mount.

Ang Pagkilala

Tungkol sa A' Design Award na Pilak

Ang Vista EY2T Motorized na Biometric Identification Camera ay nagwagi ng A' Design Award na Pilak, isang pambihirang prestihiyosong pagkilalang iginagawad sa mga disenyong nasa pinakamataas na antas, nakabibighani at kahanga-hanga. Ang mga nagwagi ng Pilak ay mga likhang lubhang makinang at napakamalikhain na naglalarawan sa pambihirang kadalubhasaan, talento at talas ng isip ng kanilang mga tagapagdisenyo. Inaasahang ang Vista EY2T Motorized na Biometric Identification Camera ay isang kahanga-hangang likhang huwaran na kapansin-pansing propesyonal at malalim na makabago. Ang disenyong ito na nagwagi ng A' Design Award na Pilak ay isang lubhang kapansin-pansin at hinahangaang imbensyon na nakikinabang at nagpapaunlad sa mga hangganan ng sining, agham, disenyo at teknolohiya. Ang Vista EY2T Motorized na Biometric Identification Camera ay isang likhang labis na kinaiinggitan na gumigising ng mga hangarin, nagdadala ng positibong damdamin at nagpapasiklab ng pagkamangha at pagkabighani.

Sa Likod ng Disenyo

Press Kit

Mga kredito, miyembro ng koponan at teknikal na detalye na ibinigay ng taga-disenyo.

Mga Natatanging Katangian: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Mga Sukat at Packaging: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Mga Tag: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Teknolohiya sa Produksyon: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Hamon sa Disenyo: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Pananaliksik: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Inspirasyon: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Tagal ng Proyekto: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Daloy ng Operasyon: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Mga Miyembro ng Koponan: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Mga Credit ng Larawan: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015