Mira Alaga láti ọwọ́ Cemil Yavuz jẹ́ aṣẹ́gun olókìkí púpọ̀ ti 2021 Àmì-ẹ̀yẹ Irin A' Design Award nínú Ẹ̀ka Ìdíje Àpẹẹrẹ Ohun-èlò Ilé.
IrinOhun-èlò Ilé· 2021
Mira Alaga
látọ̀wọ́ Cemil Yavuz
Oníbàárà: Cemil Yavuz
Aṣẹ́gun Àmì-ẹ̀yẹ Irin A' Design Award nínú Ẹ̀ka Ohun-èlò Ilé
Aṣẹ́gun Àmì Ẹ̀yẹ Tí a Jẹ́rìísí
Jẹ́rìísí Ipò Àmì Ẹ̀yẹ fún #116467Àpẹrẹ Náà
Nípa Mira Alaga
Mira jẹ́ alaga tí a ṣe àpẹrẹ rẹ̀ fún jíjẹun àti ìjókòó gbogbogbòò. Férémù rẹ̀ ni a fi àwọn pírófáìlì yíyí mẹ́ta tí a fi irin aláìlábàwọ́n (stainless steel) ṣe. Àwọn pírófáìlì méjì ni a tẹ̀ ní igun kan náà àti ní ìtọ́sọ́nà kan náà, nígbà tí ẹ̀kẹta ni a tẹ̀ ní ọ̀nà tí ó yàtọ̀. Àwọn ojú ìjókòó àti ẹ̀yìn tí a bo pẹ̀lú aṣọ ni a so mọ́ férémù náà, àti àwọn ẹsẹ̀ ṣíṣu tí a lè ṣàtúnṣe gíga rẹ̀ ni ó parí ìṣe alaga náà. Mira jẹ́ fífúyẹ́ ó sì lè gbé sí àyíká tábìlì tàbí kí ó dúró fúnrarẹ̀. A lè lo alaga náà pẹ̀lú títẹ̀ sí apá òsì tàbí apá ọ̀tún. A ń fi Mira ránṣẹ́ ní ọ̀nà tí a kò tí ì ṣàkójọpọ̀, nítorí náà àwọn olùmúlò lè kó alaga náà jọ lẹ́yìn tí wọ́n bá ti yọ ọ́ kúrò nínú páálí.
Ìdánimọ̀ Náà
Nípa Àmì-ẹ̀yẹ Irin A' Design Award
Mira Alaga jẹ́ olùborí Àmì-ẹ̀yẹ Irin A' Design Award, ìdánimọ̀ olókìkí tí a fún àwọn àwòṣe tó dára tí wọ́n pàdé àwọn ohun tí iṣẹ́ àti ilé-iṣẹ́ nílò tí a retí láti ọ̀dọ̀ àwọn ẹ̀dá tí a ṣàwòṣe dáradára. Àwọn olùborí Irin ń fi ìjáfáfá ńlá, ìmọ̀ pàtó gíga, òye ògbóǹtarìgì àti agbára ìṣẹ̀dá àwọn olùṣẹ̀dá wọn hàn. A retí pé Mira Alaga yóò jẹ́ ẹ̀dá tí a kà sí gidigidi, tí a gbóríyìn fún tí a sì nífẹ̀ẹ́, tó wúlò tó sì ní ìmúṣẹ̀dá tuntun. Àwòṣe tó borí Àmì-ẹ̀yẹ Irin A' Design Award yìí ń kó àwọn ọ̀nà tó dára jùlọ ilé-iṣẹ́ jọ, ó sì ní àwọn ànímọ́ ìmọ̀-ẹ̀rọ tó péye tí a so mọ́ ìmọ̀ ṣíṣe àti ẹ̀bùn. A bọ̀wọ̀ fún Mira Alaga nítorí ìfọ̀kànbalẹ̀ rẹ̀, a sì ṣàwòṣe rẹ̀ láti pèsè ìmúdára ìgbésí ayé tó ń ran ayé lọ́wọ́ láti di ibi tó dára jù.
Lẹ́yìn Àpẹrẹ Náà
Àkójọ Ìròyìn
Àwọn ẹ̀tọ́, àwọn ọmọ ẹgbẹ́ àti àlàyé ìmọ̀ ẹ̀rọ tí olùṣàpẹrẹ pèsè.
- Àwọn Ohun Àkànṣe
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Ìwọ̀n àti Àpò
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - Àwọn Àkọlé
- Bending, Metal Profile, Chair, Simple, Elegant
- Ìmọ̀-ẹ̀rọ Ìṣelọ́pọ̀
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Ìpèníjà Àpèsè
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- Ìwádìí
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- Ìmísí
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- Àkókò Iṣẹ́ Àkànṣe
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- Ìlànà Ìṣiṣẹ́
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
Oníṣọwọ́
Ṣàwárí Ju Designers.org Lọ
Ṣàwárí àwọn ọjà, iṣẹ́ àti àǹfààní láti ọ̀dọ̀ àwọn alábàáṣe ìpolówó wa.
Díẹ̀ Síi Láti Ṣàwárí
Àwọn Àpẹrẹ Tó Jọra
Ṣàwárí àwọn àpẹrẹ mìíràn tó gba àmì ẹ̀yẹ nínú ẹ̀ka kan náà, tí a yàn nípasẹ̀ ìyege.
