设计师 Sheng-Lun Huang and Chih-Yen Lin 的作品 Silicon 输液剂量控制系统 荣获了极具声望的 2021 A' Design Award 银奖，竞赛类别为创意与概念设计。
银创意· 2021
Silicon 输液剂量控制系统
设计师： Sheng-Lun Huang and Chih-Yen Lin
客户: Design Lions
创意类别A' Design Award 银奖获奖者
86,521
已验证的获奖者
验证 #121915 的获奖状态设计作品
关于 Silicon 输液剂量控制系统
Silicon 是一款半自动输液剂量控制系统，可对静脉给药的流速与持续时间进行调控。机械式定时器与流量调节阀分别设置于输液管的上方与下方，医护人员无需进行心算即可设定所需的滴速与时长。当给药剂量完成后，阀门会自动切换至生理盐水模式并持续注射，从而降低了繁忙时段发生操作失误的风险。Silicon 无需用电，因此能够服务于医疗资源匮乏的地区。
荣誉认可
关于A' Design Award 银奖
Silicon 输液剂量控制系统是 A' Design Award 银奖得主，这是授予顶级、华美而令人印象深刻的设计的极为崇高的认可。银奖得主是极其卓越、极具创造力的作品，展现出其设计师杰出的专业技能、才华与敏锐。预计Silicon 输液剂量控制系统将成为一件出色的典范之作，兼具非凡的专业性与深刻的创新性。这件赢得 A' Design Award 银奖的设计是一项备受瞩目、令人钦佩的发明，造福并拓展艺术、科学、设计和技术的边界。Silicon 输液剂量控制系统是一件令人羡慕的创作，它唤起渴望，带来积极的情感，并激发惊叹与赞叹。
设计幕后
媒体资料包
由设计师提供的致谢、团队成员及技术详情。
- 独特属性
- Silicon is a semi automatic precise infusion solution dosing system, by simple mechanical timer and flow rate valve to improve medical negligence by staff control of flow rate and time of drip medicine, It does not require electricity to replace expensive electronic automatic detection devices, helping resources deprived areas.
- 尺寸与包装
- Width 110mm x Depth 57mm x Height 302mm
- 标签
- Infusion，Dosing，Automatic，Timing，Control
- 生产技术
- After completing the dosing, the internal structure of the upper drug timer and the lower timing flow rate valve will drive the aperture flow rate valve to switch to the physiological saline mode, open the physiological saline hole, and continue to inject into the patient body to prevent the medical staff from being busy time negligence caused accidents.
- 设计挑战
- This is the third generation design. Each generation of design is more in line with the process sequence, ergonomics, and long term cooperation with the medical team for testing. In order to solve the timing problem, we challenged different structures and methods of calculating the flow rate, and needed to confirm that the drug was completely injected without harming the patient, so this is a difficult challenge.
- 研究
- In fact, we interviewed nurses and trainee nurses who are used every day, and learned about the existing intravenous infusion procedures. Therefore, the design and research of the drug timer structure and the timing flow rate valve structure improve the accuracy of intravenous drug injection and make the work of medical staff more convenient and accurate.
- 灵感
- Through interviews with medical staff, it was found that some medicines need to be injected for about 30 to 60 minutes and the medical staff must mentally calculate the drip flow rate and monitor the drip status back and forth. Not only does it make the medical staff feel stressed, but in the busy peak hours, it is easy for them to forget about patients medical treatment, causing accidents.
Each year, the health care industry creates billions of pounds of waste on average, with the prevalence of disposable medical materials causing a rapid depletion of health care resources and a lot of environmental pollution. - 项目周期
- Silicon development has made great efforts together with medical staff. In a tight year, we realized that this is a daunting challenge and helped medical staff to reduce their hardship.
- 操作流程
- I.Close the water inlet hole.
II.Put the medicine bottle in place.
III.Adjust the flow rate valve aperture.
IV.Adjust the flow rate valve timer.
V.Adjust the medicament timer.
VI.Attach a special identification label.
Dosing method:
I.Silicone puncture dosing
II.Automatic dosing stand dosing:By pressing the button of the dosing stand, the control structure can fix the medicine bottle in place. The dosing stand contains a needle that can automatically puncture the medicine bottle to achieve automatic dosing. - 团队成员
- Designer：Sheng-Lun Huang
Designer：Chih-Yen Lin
Professor：Kai-Chu Li
Medical team：Ciao-Yi Chen
Medical team：Ya-Ling Chen
Medical team：He-Yen Lin - 图片版权
- All Images:Designer Sheng-Lun Huang and Chih-Yen Lin
赞助内容
探索 Designers.org 之外
发现来自我们广告合作伙伴的产品、服务和机会。
探索更多
相关设计
探索同类别中更多按优秀程度甄选的获奖设计。
