Bend 咖啡桌

设计师： Jan Goderis

家具类别A' Design Award 铜奖获奖者

15,355

已验证的获奖者

验证 #148865 的获奖状态

访问网站在A' Design Award上查看新闻稿获奖徽章

色彩

设计作品

关于 Bend 咖啡桌

桌子由两块弯曲的铝板拼接而成。当组装在一起时，板一直延伸到腿。这为设计提供了一定的透明度和轻盈度，并为杂志、报纸和格子布创建了垂直存储。在两个顶板之间，桌子两侧还可以存放物品。

荣誉认可

关于A' Design Award 铜奖

Bend 咖啡桌是 A' Design Award 铜奖得主，这是授予以创造力、独创性和敏锐见长的杰出设计的极具声望的认可。铜奖得主是技艺娴熟、创意惊人的作品，印证了其设计师丰富的经验、想象力与机智。预计Bend 咖啡桌将成为一件备受推崇、令人钦佩且被珍爱的物品，兼具显著的专业性与创新性。这件赢得 A' Design Award 铜奖的设计融入艺术、科学、设计和技术领域的最佳实践，并因注重细节而出类拔萃。Bend 咖啡桌出色地满足需求，触动渴望，迷住情感，并吸引好奇心。

设计幕后

媒体资料包

由设计师提供的致谢、团队成员及技术详情。

独特属性: The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
尺寸与包装: Dimensions: 125 x 55 x 28 cm
标签: coffee table, folded table, ecological design, functional design, minimal design
生产技术: Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
设计挑战: The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
研究: The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
灵感: The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
项目周期: The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
操作流程: The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
专利: e-depot: 000595853
团队成员: Jan Goderis
图片版权: #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022