Planck 茶几

设计师： Kristof De Bock

客户: Dasein Products

家具类别A' Design Award 金奖获奖者

62,500

已验证的获奖者

验证 #93711 的获奖状态

访问网站在A' Design Award上查看新闻稿获奖徽章

色彩

设计作品

关于 Planck 茶几

桌子由不同的胶合板制成，这些胶合板在压力下会粘在一起。表面用砂纸打磨，并带有哑光和非常坚固的清漆。由于桌子的内部是中空的，因此共有2个级别，这对于放置杂志或格子布非常实用。桌子下面有内置的子弹头轮。因此地板和桌子之间的间隙很小，但同时也很容易移动。胶合板的使用方式（垂直）使其非常坚固。

荣誉认可

关于A' Design Award 金奖

Planck 茶几是 A' Design Award 金奖得主，这是授予一流、绝妙而杰出设计的极为崇高的认可。金奖得主是极具创新、极富远见且璀璨夺目的创作，反映出其设计师的天才、智慧与才干。预计Planck 茶几将成为一项备受赞誉、引领潮流、气势恢宏的发明，带来前所未有的价值。这件赢得 A' Design Award 金奖的设计是一个壮观而受人敬重的项目，极大地造福并拓展艺术、科学、设计和技术的边界。Planck 茶几激起强烈的渴望，唤起激情，鼓励创造力，令我们着迷。

设计幕后

媒体资料包

由设计师提供的致谢、团队成员及技术详情。

独特属性: Dasein products was looking to come up with an unique coffee table. Different in form and materials. They choose plywood but used it in an unconventional way by bonding it together on the flat sides. This gave the possibility to make a robust and elegant looking object at the same time. Seen from the sides one sets eyes on a block of wood, seen from the fronts, one looks at an elegant, 2-level object. Due to the strength of the material, the thickness of the levels can be reduced to a thin line.
尺寸与包装: Width 75 cm x Depth 46 cm x Height 30 cm
标签: Objectdesign, coffeetable, furniture, living room
生产技术: The table is made of several pieces of polish pine plywood that are prepared with a CNC cutter. Once they are connected with glue and kept under high pressure for at least 12 hours, they require intense sandpapering and varnishing.

At the bottom, holes are drilled for the bullet wheels that need to be glued in.
设计挑战: The biggest challenge for this project was to come up with a unique concept that has an esthetic added value but is still functional. Dasein Products has chosen to make a rather small coffee table that is very easy movable. It can be used to store plaids, books, etc. so it looks neat at the sam time.
研究: The object is designed with the golden ratio in mind. Seen both from top as from short sides, these proportions are respected for the wooden part.

The 2 horizontal layers where intended to be thin but strong. They are narrowed down to 17mm and still a full grown man can stand on the middle of the table.

A lot of time was spend on finding the bullet wheels. Metal wheels are strongest, but make a lot of noise on a stone floor. So the designer came up with small nylon wheels, but lots of them. In total 16 are placed under each table.
灵感: Above all, furniture should be functional. The challenge was to create a coffee table that was different then others, esthetic and functional. With these goals in mind, the designer explored different materials.
项目周期: The basic idea came early summer of 2019. It took some time to get the details straight in the workshop in Ronse (Belgium) but in the beginning of September the coffee table was presented to the world.
操作流程: The table is fairly small and movable. The idea is to eliminate the big center piece table, but place (more than one) in the living room that can be moved to where it is needed.
团队成员: Kristof De Bock
图片版权: Photograper Pieter Gregoire