Umdwebo Arch Isihlalo, Isihlalo Esingenambheka ngu-Edvard Glazebrook ungumnqobi ohlonishwa kakhulu womklomelo odumile we-2021 Umklomelo Webhulonzi we-A' Design Award Esigabeni Somncintiswano se-Ukudizayina Ifenisha.
IbhulonziIfenisha· 2021
Arch Isihlalo, Isihlalo Esingenambheka
Umnqobi we-Umklomelo Webhulonzi we-A' Design Award Esigabeni se-Ifenisha
Umnqobi Womklomelo Oqinisekisiwe
Qinisekisa Isimo Somklomelo se-#106853Ukuklama
Mayelana ne-Arch Isihlalo, Isihlalo Esingenambheka
Umbhalo Wencwadi: I-Arch iyisihlalo kanye nesihlalo esingenambheka esenziwe ngephayini elibaziweyo nelinamathaniswe elifakwe umbala omnyama. Umklamo usekelwe ezimweni nasezakhiweni ezilula futhi eziphindaphindekayo, ezinika ifenisha isimo esifanayo nesinengqondo. Ama-arch amahlanu afanayo akha imilenze kanye nomhlane wesihlalo, kanti isihlalo esingenambheka senziwe ngezingxenye ezintathu ezingamahhafu e-arch ezihlangana enkabeni. Zonke izingxenye zisikwa kusuka ebhodini lokhuni elinamathaniswe kusetshenziswa i-CNC router, bese zinamatheliswa futhi zihlanganiswa ngamapini okhuni. Amakhoba aqinisa ifenisha ezindaweni zalo ezibuthakathaka.
Ukuqashelwa
Mayelana ne-Umklomelo Webhulonzi we-A' Design Award
Arch Isihlalo, Isihlalo Esingenambheka iwinile uMklomelo Webhulonzi we-A' Design Award, ukwaziswa okuhloniphekile kakhulu okunikezwa imiklamo ephawulekayo eyehlukaniswa ukudala, ubuhlakani nobukhali bengqondo. Abawinile beBhulonzi yimisebenzi enobuchule obukhulu nedala ngokumangalisayo eqinisekisa isipiliyoni esibanzi, umcabango nobuhlakani babaklami babo. Arch Isihlalo, Isihlalo Esingenambheka ilindeleke ukuba ibe yinto exatshwa kakhulu, edunyiswayo nethandwayo, enobungcweti obuphawulekayo nezinto ezintsha. Lo mklamo owinile uMklomelo Webhulonzi we-A' Design Award uhlanganisa izindlela ezinhle kakhulu ebuciko, esayensi, ekuklameni nasebuchwepheshe futhi uhamba phambili ngenxa yokunaka kwawo imininingwane. Arch Isihlalo, Isihlalo Esingenambheka iyanelisa izidingo ngokumangalisayo, ithinta izifiso, iheha imizwa futhi ikhanga ukufuna ukwazi.
Ngemuva Kokuklama
Iphakheji Yabezindaba
Ama-credit, amalungu eqembu nemininingwane yobuchwepheshe ehlinzekwe ngumklami.
- Izici Ezihlukile
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Izilinganiso Nokupakisha
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Amathegi
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Ubuchwepheshe Bokukhiqiza
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Inselele Yokudweba
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Ucwaningo
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Ugqozi
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Ubude Bephrojekthi
- The project started in march 2020 - and finished in late May 2020.
- Ukuhamba Kokusebenza
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Amapathenti
- Copyrights belong to Edvard Glazebrook, 2020
- Amalungu Eqembu
- Edvard Glazebrook
Okuxhasiwe
Hlola Ngaphesheya Kwe-Designers.org
Thola imikhiqizo, izinsizakalo namathuba avela kubaphathi bethu bezikhangiso.
Okuningi Okungahlolwa
Okuklanyelwe Okuhlobene
Hlola okuningi okuklanywe okuwine umklomelo okuvela esigabeni esifanayo, okukhethwe ngokufaneleka.
