Ayla ቶቴ ባግ በ Liam Huff የተሠራ ሲሆን በ የፋሽን እና የጉዞ መለዋወጫዎች ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2025 A' Design Award የብረት ሽልማት አሸናፊ ነው።

ብረትመለዋወጫ· 2025

Ayla ቶቴ ባግ

በ Liam Huff

ደንበኛ: Rochester Institute of Technology

በ መለዋወጫ ምድብ ውስጥ የ A' Design Award የብረት ሽልማት አሸናፊ

27,945

የተረጋገጠ የሽልማት አሸናፊ

ለ #167955 የሽልማት ሁኔታ ያረጋግጡ

ድረ-ገጽ ጎብኝ በ A' Design Award ይመልከቱ ጋዜጣዊ መግለጫ የሽልማት ባጅ

ቀለሞች

ንድፉ

ስለ Ayla ቶቴ ባግ

አይላ ብዙ የምርት ዘመናትን የሚያሳልፍ ሞዱላር የቆዳ ቶቴ ባግ ነው። ባጉ ምንም ስፌት ሳያስፈልገው በሚነጣጠሉ የናስ መገጣጠሚያዎች (ሂንጆች) አማካኝነት አንድ ላይ በተያያዙ ሊቀያየሩ የሚችሉ የቆዳ ፓነሎች ተገንብቷል። እያንዳንዱ ፓነል በውጪኛው መገጣጠሚያ እና በውስጠኛው ሳህን መካከል ተቀምጦ በፒኖች እና በስክሩዎች ይጠበቃል። የተጎዳ ፓነል ባጉን ሙሉ በሙሉ ከመጣል ውጭ ሊተካ ይችላል። ቅድመ-ተወሰኑ ንድፎች የተነጠለ ፓነል ወደ ትንሽ ክላች ተለውጦ እንደገና እንዲሠራ ያስችላሉ። ሙሉ በሙሉ መፈታታት የመጠገንና እንደገና የመጠቀም አገልግሎትን በምርቱ የህይወት ዘመን ፍጻሜ ላይ ይደግፋል።

እውቅናው

ስለ A' Design Award የብረት ሽልማት

Ayla ቶቴ ባግ የA' Design Award የብረት ሽልማት አሸናፊ ነው፤ ይህም በጥሩ ሁኔታ ከተነደፉ ፈጠራዎች የሚጠበቁትን ሙያዊና ኢንዱስትሪያዊ መስፈርቶች ለሚያሟሉ ጥሩ ዲዛይኖች የሚሰጥ ከፍተኛ ክብር ያለው እውቅና ነው። የብረት አሸናፊዎች የፈጣሪዎቻቸውን ታላቅ ችሎታ፣ ከፍተኛ ልዩ ሙያ፣ የባለሙያ ግንዛቤ እና የፈጠራ አቅም ያሳያሉ። Ayla ቶቴ ባግ ከፍ ያለ ግምት የሚሰጠው፣ የሚደነቅና የሚወደድ፣ ተግባራዊና ፈጠራ የተሞላበት ሥራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የብረት ሽልማትን ያሸነፈ ዲዛይን የኢንዱስትሪ ምርጥ ልምዶችን ያዋህዳል፤ ከእውቀትና ከተሰጥኦ ጋር የተሳሰሩ ብቁ ቴክኒካዊ ባህሪያትም አሉት። Ayla ቶቴ ባግ በጥልቅነቱ የተከበረ ሲሆን ዓለምን የተሻለ ቦታ ለማድረግ የሚረዱ የሕይወት ጥራት ማሻሻያዎችን ለማቅረብ የተነደፈ ነው።

ከንድፉ በስተጀርባ

የፕሬስ ኪት

ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።

ልዩ ባህሪያት: Modular and transformable leather panels along with detachable hinges allow Ayla to last multiple product life cycles. The detachable hinge facilitates ease of repair when the product gets damaged. Simply undo the hinge and replace the damaged leather panel, eliminating the need to throw away the entire product. The ability to fully disassemble the product allows for an environmentally friendly end-of-life with the ability to either repair or transform old leather panels into new products.
ልኬቶች እና ማሸጊያ: 460 mm x 100 mm x 330 mm
መለያዎች: Bag, Leather, Sustainable, Hardware, Interchangeable, Replaceable, Tote, Modular Panels, Transformable
የማምረቻ ቴክኖሎጂ: Experimenting with multiple 3D printed components, I focused on exploring ways to attach leather panels without the use of stitching. I landed on a pin system. Leather panels are sandwiched between an outer hinge and an inner plate. The panels are secured atop the pins and then anchored with a series of screws. With these hinges, everything from the handle, to the main body, to the interior can be replaced. Final hinges were made of polished brass to ensure longevity with extended ware.
የዲዛይን ተግዳሮት: The hardest part of this project was finding the perfect intersection of functionality/sustainability and desired look. I determined through my research that my target audience wanted a product that had sustainable attributes but looked no different from a traditional bag. I could achieve the desired function but not in an aesthetic that was appealing to my audience. Through many rounds of prototypes and interviews, I came to a final mechanism that satisfied both ends.
ምርምር: I started with database research to determine opportunities to reduce waste. I interviewed 4 professionals in the fashion accessories industry. I used these two methods to inform my hinge mechanism. For product look and feel, I used a survey to determine bag silhouette, mood boards to determine detail and target audience, triading to determine desired look, narrative scenarios to determine how the bag would be used, and user interviews to ultimately hone in on a final design direction.
መነሳሻ: Leather is one of the most polluting sectors within fashion. Most leather products contribute to the idea of take-make-waste. Reducing environmental impact is not as simple as switching to a leather alternative. Almost all alternatives are polymer based and cannot match traditional leather's longevity. If farmed regeneratively, used as meat industry byproduct, and, if able to be used multiple times, leather can be sustainable. Ayla explores how we can use leather to its maximum potential.
የፕሮጀክት ጊዜ: Started in August of 2023 at Rochester Institute of Technology in Rochester, New York, USA. and finished in May of 2024 in Rochester, New York, USA.
የሥራ ሂደት: The detachable nature of the metal hinge allows for components within the product to be interchanged when damage occurs. If one side of the product gets damaged, simply replace that panel, not the entire item; this reduces wastage. Additionally, the main leather panels were designed to be turned into a different, smaller product if only one panel can be salvaged. Predetermined patterns ensure that one panel can be turned into a smaller clutch, further reducing the waste of the item.
የምስል ምስጋና: Image #1 : Photographer Elizabeth Lemark, AYLA_1_3600.jpg, 2024.
Image #2 : Photographer Chelsea Cohen, AYLA_MAIN_1800.jpg, 2024.
Image #3 : Photographer Chelsea Cohen, AYLA_2.jpg, 2024.
Image #4 : Photographer Elizabeth Lemark, AYLA_3.jpg, 2024.
Image #5 : Photographer, Sneha Yalgi, AYLA_5.jpg, 2024