Disainilahendus Equilibrio Skulptuurne Valamu, autor Thiago Mondini

Disainilahendus Equilibrio Skulptuurne Valamu, mille autor on Thiago Mondini, on kõrgelt hinnatud 2023 auhinna Hõbeauhind A' Design Award võitja konkursi kategoorias Vannitoamööbli ja sanitaartehnika disain.

HõbeSanitaartehnika· 2023

Equilibrio Skulptuurne Valamu

disainer: Thiago Mondini

Klient: Thiago Mondini Arquitetura

Auhind Hõbeauhind A' Design Award kategoorias Sanitaartehnika

661,173

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #147388

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Equilibrio Skulptuurne Valamu

Equilibrio on skulptuurne valamu, mis uurib kontrasti tööpinna õrna kalde ja selle tugeva mahu vahel. Valmistatud mitme kivitüki kokkupanemisel ja modelleerimisel ümara formaadi saavutamiseks, tegelik valamu luuakse diagonaalse osa ja tüki ülemise osa kerge kalde abil. Soovitatavad toed on asümmeetrilised, ühelt poolt torustikku katva õõnestoruga ja teiselt poolt kõhna jalaga, kuid seda tükki võiks kasutada ka ilma tugedeta.

Tunnustus

Auhinnast Hõbeauhind A' Design Award

Equilibrio Skulptuurne Valamu on Hõbeauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tipptasemel, suurepärastele ja muljetavaldavatele disainidele. Hõbevõitjad on ülimalt säravad ja erakordselt loovad tööd, mis illustreerivad oma disainerite silmapaistvat kogemust, annet ja teravmeelsust. Equilibrio Skulptuurne Valamu peaks olema imeline, eeskujulik töö, mis on märkimisväärselt professionaalne ja sügavalt uuenduslik. See Hõbeauhinna A' Design Award võidudisain on väga tähelepanuväärne, imetletud leiutis, mis toob kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Equilibrio Skulptuurne Valamu on laialdaselt kadestatud looming, mis äratab soove, tekitab positiivseid tundeid ning süütab hämmastust ja imestust.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: This sculptural stone sink relies on the contrast between the countertop's delicate inclination and its robust volume. The sink is created by a diagonal section and a slight tilt of the upper portion of the piece. The supports are asymmetrical, with a hollow tube covering the pluming on one side and a skinny leg on the other.
Mõõtmed ja pakend: 1500 mm x 600 mm x 250 mm
Sildid: bathroom, sink, lavatory, basin, sculpture, artistic, stone, quartzite
Tootmistehnoloogia: As already specified above, this piece was assembled from several stone fragments in order to create the curves without the need of a solid block of rock. This was the main technical challenge. The design is actually quite straightforward and is based on a diagonal cut of the countertop, the remaining portion being slightly tilted to the right angle to prevent water from spilling when it collides with the surface.
Disainiülesanne: The hardest part of this activity was to reach simplicity and yet maintain ingenuity. Assuring the correct funcioning of the sink was also higly important, as it would be in display for one year and should have no problems operating.
Uurimistöö: This sculptural stone sink relies on the contrast between the countertop's delicate inclination and its robust volume. Design-wise there was a search for apparent simplicity: to cut a countertop diagonally and push it down so the water can flow. This tilt is of mere 1cm and in the right angle to prevent water from spilling. The assymetrical supports enhance the perception of contrasts. In one side a hollow tube covers the plumbing, in the other side a skinny metal leg almost defies gravity.
Inspiratsioon: This project's major objective was to explore contrasts. Since stone often has a very dense appearance, I investigated a design and technique to make it appear both weighty and delicate. The sink could have been cut from a single stone block or assembled from a number of small stone fragments. Due to financial considerations, the second option was preferred. A diagonal section and a slight tilt of the upper portion of the piece creates the actual basin.
Projekti kestus: The project started in June 2022 ad finished in August 2022, and is currently being exhibited at Mostra Artefacto Balneario Camboriu, Brazil, from August 2022 until June 2023.
Tööprotsess: This is a sculptural object, meant to be, at the same time, artistic and functional. It could be produced in different sizes and the main characteristics are the subtle elements designed in a very heavy-looking piece.
Meeskonnaliikmed: Thiago Mondini
Piltide autorid: Image #1: Photographer ArqVerso
Image #2: Photographer ArqVerso
Image #3: Photographer ArqVerso
Image #4: Photographer ArqVerso
Image #5: Photographer ArqVerso