اثر Etile سفال بام فتوولتائیک توسط Jaroslaw Markowicz برنده بسیار ارزشمند جایزه پرافتخار 2020 جایزه نقرهای A' Design Award در دستهبندی رقابتی طراحی مصالح ساختمانی و قطعات ساختوساز است.
نقرهقطعات ساختمانی· 2020
Etile سفال بام فتوولتائیک
توسط Jaroslaw Markowicz
مشتری: Electrotile
برنده جایزه نقرهای A' Design Award در دستهبندی قطعات ساختمانی
برنده تأییدشده جایزه
تأیید وضعیت جایزه برای #103293طراحی
درباره Etile سفال بام فتوولتائیک
اِتایل یک سفال بام فلزی فتوولتائیک است که برای استفاده روی انواع مختلف ساختمانها طراحی شده است. هر ماژول بر پایه یک سفال بام فولادی گالوانیزه سنتی ساخته شده و پنج پنل فتوولتائیک میکرو را حمل میکند که برق تولید میکنند. ابعاد ماژولها ۱۲۰۰ در ۳۶۰ در ۳۰ میلیمتر است و مانند سفالهای بام معمولی به یکدیگر متصل میشوند، در حالی که اتصالات کابلی زیر پوشش بام پنهان شدهاند. خط برق به شبکه برق ساختمان متصل میشود. پنل فولادی در پایان عمر محصول قابل جداسازی است. اِتایل بدون تغییر در ساختار بام، تولید انرژی را اضافه میکند.
تقدیر
درباره جایزه نقرهای A' Design Award
Etile سفال بام فتوولتائیک برنده جایزه نقرهای A' Design Award است، شناختی فوقالعاده معتبر که به طراحیهای سطح بالای زیبا، والا و تأثیرگذار اعطا میشود. برندگان نقره آثاری بسیار درخشان و فوقالعاده خلاقاند که تخصص، استعداد و تیزبینی برجسته طراحان خود را نشان میدهند. از Etile سفال بام فتوولتائیک انتظار میرود اثری شگفتانگیز و نمونه باشد که بهطور چشمگیری حرفهای و عمیقاً نوآورانه است. این طراحی برنده جایزه نقرهای A' Design Award اختراعی بسیار قابلتوجه و ستوده است که سود میرساند و مرزهای هنر، علم، طراحی و فناوری را پیش میبرد. Etile سفال بام فتوولتائیک آفرینشی است که به آن بسیار رشک برده میشود، خواستهها را بیدار میکند، احساسات مثبت میآورد و حیرت و شگفتی برمیانگیزد.
پشت صحنه طراحی
بسته مطبوعاتی
اعتبارات، اعضای تیم و جزئیات فنی ارائهشده توسط طراح.
- ویژگیهای منحصربهفرد
- Electrotile is going to offer photovoltaic steel tiles together with the rest of PV equipment and installation service unlike current suppliers of roof integrated PV. The modular, easy-to-use product allows it to be delivered to almost any type of building.
- ابعاد و بستهبندی
- 1200mm x 360mm x 30mm
- برچسبها
- Bipv, Photovoltaic, Solar, Solar roof, Green Energy, Architecture
- فناوری تولید
- the design of the etile is based on metal roof tiles, a traditional solution based on galvanized steel has created an easily available product. Each individual module has 5 micro photovoltaic panels that generate energy. The steel panel can be easily separated, which is extremely important for the product life cycle.
- چالش طراحی
- Our company has been collecting experience in photovoltaics by installing panels on roofs. Most of the insides came from our customers who complained about the poor aesthetics and the mismatch of the size of the panels to the roof. The design challenge was available solutions that would be quick to install, available cheap and aesthetically.
- پژوهش
- the roofing sheet project was a research and development project during which many tests were carried out. During the design process, we were testing various panel sizes, material connectrions and overal look of product on the building.
- الهام
- Traditional photovoltaic panels often look unsightly on the building, their large size does not allow for an exact fit to the roof body. We wanted to propose a solution which would look good on the building and not stand out from traditional roof tiles.
- مدت زمان پروژه
- the project was developed in Warsaw. Conceptual work lasted from september 2016. After many prototypes and tests, the project was finally implemented in January 2020.
- فرایند عملیاتی
- The modules are connected together in the same way as ordinary roof tiles. The only element distinguishing Etile are cable connections, which are hidden under the roof sheathing. As in the case of a solar installation, the power line is connected to the home power grid.
- اعضای تیم
- Paweł Wujek
Daniel Ziomek
حمایتشده
فراتر از Designers.org را کاوش کنید
محصولات، خدمات و فرصتهای شرکای تبلیغاتی ما را کشف کنید.
بیشتر کاوش کنید
طراحیهای مرتبط
طراحیهای برنده جایزه بیشتری از همین دستهبندی را کاوش کنید، انتخابشده بر اساس شایستگی.