Automatic Derliaus nuėmimo robotas – autorius Denso Corporation

Darbas Automatic Derliaus nuėmimo robotas, kurio autorius Denso Corporation, yra itin vertinamas prestižinio 2024 Platininis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje Robotikos, automatų ir automatizavimo dizainas.

PlatininisRobotika· 2024

Automatic Derliaus nuėmimo robotas

Dizaineris: Denso Corporation

Klientas: Denso Corporation

Kategorijos Robotika laimėtojas – Platininis apdovanojimas A' Design Award

1,762,206

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #145369

Aplankykite svetainę Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Automatic Derliaus nuėmimo robotas

Automatic – tai derliaus nuėmimo robotas, sukurtas didelio masto sodininkystės objektams. Automatic juda šiltnamyje nutiestais bėgiais ir, naudodamas kameras bei jutiklius, nustato, kurie vyšniniai pomidorai yra prinokę. Išsitiesianti rankena nukerpa ištisas kekes ir sudeda jas į velkamą dėžę. Darbas gali tęstis ir naktį, o tai sumažina darbo jėgos trūkumą piko derliaus nuėmimo laikotarpiais. Suapvalinti paviršiai ir perlamutrinė apdaila suminkština išvaizdą, o iš bet kurio kampo matomos indikatorinės akys rodo judėjimo kryptį. Kliūtys aptinkamos, todėl mašina saugiai sustoja.

Pripažinimas

Apie Platininis apdovanojimas A' Design Award

Automatic Derliaus nuėmimo robotas laimėjo Platininį apdovanojimą A' Design Award, itin prestižinį pripažinimą, skiriamą tikrai išskirtiniams, elegantiškiems ir didingiems dizainams. Platinos laureatai yra kūrybos stebuklai, intelektinio kūrybiškumo ribų liudijimas ir parodo neprilygstamą savo kūrėjų profesionalumą bei genialumą. Tikimasi, kad šie dizainai bus garsiausi kūriniai, apibrėžiantys epochos estetiką, prisidedantys prie visuomenės gerovės ir plečiantys meno, mokslo, dizaino ir technologijų ribas. Automatic Derliaus nuėmimo robotas rodo transcendentinį tobulumo lygį ir naudingomis savybėmis daro pasaulį geresnį. Automatic Derliaus nuėmimo robotas yra Platininį apdovanojimą A' Design Award laimėjęs kūrinys, pažadinantis troškimus, įkvepiantis, džiuginantis ir sukeliantis didelį džiaugsmą.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: With a declining number of farmers worldwide, time-consuming harvesting is one area to save manpower. That is why we designed this robot to offer peace of mind when interacting with it. It features eyes that can be seen from any angle, indicating its travel direction and giving it a friendly image while its rounded top surface and pearlescent finish make it unintimidating. Its system allows it to detect obstacles and stop safely, and its top surface is free of bumps where dirt can accumulate.
Matmenys ir pakuotė: 1230mm×1320mm×930mm
(not including cutters, cables)
Chassis weight 300 kg
Žymos: automated harvesting, robot, AgriD, cherry tomato, horticulture facility, DENSO, DENSO Design
Gamybos technologija: A new level of harvesting technology has been reached via DENSO's unique image processing and robot hand technology.
1. A modular configuration was used for high versatility and to ensure cost reduction and a low barrier to entry.
2. For cleanliness, the top surface has as few recesses for water or dirt to collect as possible and cables are not exposed.
3. To ensure people can work safely with the robot, it features status indicator lights and has a system to detect obstacles and stop safely.
Dizaino iššūkis: In its early development the robot was angular in shape due to its internal mechanisms and complicated wiring. This combined with its large body size gave it less-than-friendly impression. To create one, we began with the internals, trying to devise a frame layout to achieve a rounded shape while maintaining functionality, and to configure the parts to reduce volume. Also, to facilitate human-robot communication, we designed indicator lights to be visible, so that they would meet peoples' eyes.
Tyrimas: Denso's goal is to integrate the entire greenhouse process into a system allowing people to do the work best suited to them, while machines do the work best suited to machines, providing local farmers with a lively workplace.
The system uses cameras and AI technology to detect bunches, judge ripeness and automatically harvest.
Replacing some of the work done by people with machines during peak harvest times reduces the burden on workers so they can work efficiently and not overtax themselves.
Įkvėpimas: The world population is set to exceed 10 billion by 2050, bringing an increased demand for food. Food shortages will likely intensify in places with growing populations like Asia and Africa, as some areas are not suitable for agriculture. Japan and other developed countries are facing problems like fewer agricultural workers due to an aging and declining population and widespread food waste. By solving these, DENSO's goal is to reform the entire food value chain toward a sustainable society.
Projekto trukmė: Design development fully underway in March, 2019.
News released in March, 2020.
Demonstration unit begins operation at AgriD in Inabe City, Mie Prefecture, Japan
Veikimo eiga: This robot harvests cherry tomatoes for large-scale horticultural facilities. It moves automatically along rails laid out in a path on the farm and uses cameras and sensors to which cherry tomatoes are ripe for harvesting. The robot's arm can extend and cut off an entire bunch of tomatoes, which is then placed in a box pulled by the robot. It can even work at night when no one is around, contributing to labor savings, addressing labor shortages, and increasing harvest volume.
Komandos nariai: Producer:
Hideyuki Nishino, Food Value Chain Business Development Division
Go Handa, Production Eng. Division
Director:
Takaomi Hasegawa, Food Value Chain Business Development Division
Tomoki Ikoma, Design Division
Yuji Kawahara, Mobility Electronics R&D Division
Designer:
Seisho Inada, Food Value Chain Business Development Division
Hiromu Arihara, Production Eng. Division
Yuko Kanda, Jihye Kim, Design Division
Nuotraukų autoriai: Image #1:Designer Yuko Kanda, 2020, Design Division, DENSO CORPORATION / Image #2-#5:2020,Public Relations Division, DENSO CORPORATION