Hexa Tlanextli ītēchcopa Sepehr Mehrdadfar

Tlanāhuatīlli Hexa Tlanextli ītēchcopa Sepehr Mehrdadfar cē cencā mahuizzō tēmacēhualōni īpan huēyi 2023 Mahuizolli A' Design Award Iztacteocuitlatl īpan Tlahuilli Tlachihualli ihuan Tlahuiltequitilli Tlachihchihualiztli Nēhuilīztli Tlamantli.

IztacteocuitlatlTlahuilli· 2023

Hexa Tlanextli

īpal Sepehr Mehrdadfar

Tlanāhuatīlli: Hamoun Design and Idea

Mahuizolli A' Design Award Iztacteocuitlatl Tēmacēhualōni īpan Tlahuilli Tlamantli

45,061

Tlaneltīlīlli Tēmacēhualōni

Xictlaneltilia Tēmacēhualli ītēchcopa #148179

Xiquitta A' Design Award ītechcopa Āmatl Tēmachiyōtīliztli Tlamachiōtl

Tlapalli

Tlanēxtilistli

Ītechcopa Hexa Tlanextli

Hexa itlayecolizyo catca ma chihua ce tlanextiloni tlein quincahua tlanextiliztli calli ipan omentin: patlahuac huan ce itic, hueliti ma hueyiya calli ipan, huan cualtia calli ipan cualnezticayotl. Ce Hexa yeylamantli ce tem chicuacenyollotli. Inon tlaxexeliliztli hueyiya Hexa ihueliti ipan miec tlachichihualiztli huan hueyiyaliztli. In tlachichihualneixcuitilli quitoca ce tlapohualxexeliuhcayotl tlein moyolih ipan "Girih" huan "miniature"; ipan huehuetlacayotl Iran caltecpan tlamahuizchichihualiztli.

Tēixīmachōtiliztli

Ītechcopa Mahuizolli A' Design Award Iztacteocuitlatl

Hexa Tlanextli ca in quicuic in Mahuizolli A' Design Award Iztacteocuitlatl, hueyi tlamahuizoliztli tlen momaca in huel yectli, tlanextic ihuan mahuiztic tlachihualli. In quicuicah Iztacteocuitlatl ca cenca cualli ihuan cenca yancuic tlachihualli in quinextia in tlamatiliztli, toltecayotl ihuan ixtlamatiliztli intlachihuanime. Ca quinequi in Hexa Tlanextli ca cenca cualli, cenca motequiuhtia ihuan yancuic. Ni dizayno in quicuic Iztacteocuitlatl quihuelitia in toltecayotl, tlamatiliztli, dizayno ihuan teknolohia. Hexa Tlanextli quiyolchicahua in tlacah, quipaquiltia ihuan quitlamahuiztiltia.

Tlanēxtilistli Ītēixpan

Āmatl Tlanextīliztli

Tlapōhualli, tēquitqueh īwan tēchmachilīztli ōquinmaca in tlanēxtīlīlli.

Cē Zan Ītēchcopa: The goal of Hexa design was to achieve a lamp that provides the lighting of the architectural space in two broad and localized modes, has the ability to expand in the space and improves the quality of the space in terms of aesthetics. A Hexa is one third of a full hexagon. This division increases the ability of Hexa in the variety of composition and expansion.
Huēyiliztli īhuān Tlacualtepēhualli: Length of each module: 770 mm
height of profile: 40 mm
width of profile: 20 mm
Tōcāitl: Geometry, Persian Miniature, Muqarnas, Texture, Wide lighting,Geometric expansion, Dynamics and movement, Simple connections
Tlachīhualiztli Māchiyōtl: Each module is made of an extruded aluminum profile in a U shape, which is rolled at an angle of 120 degrees, and the LED is placed inside, and the opening of the U is closed with a Plexiglas sheet (as a diffuser). At specific points of each module, pieces of magnets are installed that enable connecting the modules to the fixture (an iron cube that houses the electric wires and is connected to the ceiling structure). After connecting, the electric wires enter each module from inside the fixture, and the electric current reaches the internal lamp. Hexa has the ability to be installed and connected in three modes: surface, built-in and hanging due to the main fixture.
Tlanāhuatīlli Nētēcahuilīztli: It was important to choose the appropriate geometric shape as the initial model. Odd polygons do not extend in a straight line, but even polygons do. In the end, a hexagon was chosen because it formed a more complex structure than a quadrilateral and simpler than a higher degree pair of polygons.
Tlatēmōliztli: The goal of Hexa design was to achieve a lamp that provides the lighting of the architectural space in two broad and localized modes, has the ability to expand in the space and improves the quality of the space in terms of aesthetics. A hexa is one third of a full hexagon. This division increases the ability of hexa in the variety of composition and expansion.

The form of this work follows a geometric pattern that is inspired by "knotting" and "miniature" in traditional Iranian architectural decorations.
To achieve this form, all kinds of geometric shapes such as regular, irregular, odd and even polygons were tested, and in this process "hexagon" was chosen as the primary model because:
Due to the type of internal angles, the shapes with odd sides were oriented in geometric expansion and had less compatibility with general architectural plans, so their use in internal architecture required more and more complex control.
- The hexagonal pattern, when expanded, creates a far more "eye-catching" context than the quadrilateral and "simpler" than the higher degrees of the polygons.
In the next step, the hexagonal pattern was divided into smaller parts, and at the end, a line segment with a curve corresponding to the internal angle of the hexagon was selected as the main module of the design. In fact, a hexa is one third of a full hexagon. This division increases the ability of hexa in the variety of composition and expansion.
Each module is made of an extruded aluminum profile in a U shape, which is rolled at an angle of 120 degrees, and the LED is placed inside, and the opening of the U is closed with a Plexiglas sheet (as a diffuser). At specific points of each module, pieces of magnets are installed that enable connecting the modules to the fixture (an iron cube that houses the electric wires and is connected to the ceiling structure). After connecting, the electric wires enter each module from inside the fixture, and the electric current reaches the internal lamp. Hexa has the ability to be installed and connected in three modes: surface, built-in and hanging due to the main fixture.
The coexistence of modules produces a light and geometric network that increases the charisma of the architectural space. This light grid maintains its character independent of the space while providing ambient lighting and creates a decorative effect for the interior designer.
The hexagonal pattern and the geometric expansion system of this scheme provide the designer with the possibility of controlling the direction of expansion and the density of the composition. Also, due to the linear shape of each module, empty spaces have been created between the lights, which will make the lighting network transparent, so the architect or interior designer will not lose the ceiling cover when using this light.
The magnetic connection of the modules makes it easy to "assemble", "disassemble", "move and replace" and finally, the user can easily control the light network.
Tēyōllālīliztli: The form of this design follows a geometric pattern that is inspired by "Girih" and "miniature" in traditional Iranian architectural decorations.
Girih ( "knot", also written gereh) are decorative Islamic geometric patterns used in architecture and handicraft objects, consisting of angled lines that form an interlaced strapwork pattern.
Tēquitl Cāhuitl: This project designed in 2022 in Tehran, Iran.
Tēquitl Ōhuitl: The coexistence of modules produces a light and geometric network that increases the charisma of the architectural space. This light grid maintains its character independent of the space while providing ambient lighting and creates a decorative effect for the interior designer.
The hexagonal pattern and the geometric expansion system of this scheme provide the designer with the possibility of controlling the direction of expansion and the density of the composition. Also, due to the linear shape of each module, empty spaces have been created between the lights, which will make the lighting network transparent, so the architect or interior designer will not lose the ceiling cover when using this light.
The magnetic connection of the modules makes it easy to "assemble", "disassemble",
"move and replace" and finally, the user can easily control the light network.
Īxiptla Tlanēxtīlli: saeed MirTahmasb
maryam saeedpoor